This study describes the use of a composite nitrate salt solution as a precursor to synthesize CeO2 and Gd2O3-doped CeO2 (GDC) nanoparticles (NPs) using an atmospheric pressure plasma jet (APPJ). The microstructures of CeO2 and GDC NPs were found to be cubical and spherical shaped nanocrystallites with average particle sizes of 10.5 and 6.7 nm, respectively. Reactive oxygen species, detected by optical emission spectroscopy (OES), are believed to be the major oxidative agents for the formation of oxide materials in the APPJ process. Based on the material characterization and OES observations, the study effectively demonstrated the feasibility of preparing well-crystallized GDC NPs by the APPJ system as well as the gas-to-particle mechanism. Notably, the Bader charge of CeO2 and Ce0.9Gd0.1O2 characterized by density function theory (DFT) simulation and AC impedance measurements shows that Gd helps in increasing the charge on Ce0.9Gd0.1O2 NPs, thus improving their conductivity and making them candidate materials for electrolytes in solid oxide fuel cells.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1039/c5cp00735f | DOI Listing |
The densification behavior and electrical conductivity of Ce0.8Gd0.2O1.
View Article and Find Full Text PDFPhys Chem Chem Phys
June 2015
Department of Mechanical Engineering, National Taiwan University of Science and Technology, 43, Section 4, Keelung Road, Taipei, 10607, Taiwan.
This study describes the use of a composite nitrate salt solution as a precursor to synthesize CeO2 and Gd2O3-doped CeO2 (GDC) nanoparticles (NPs) using an atmospheric pressure plasma jet (APPJ). The microstructures of CeO2 and GDC NPs were found to be cubical and spherical shaped nanocrystallites with average particle sizes of 10.5 and 6.
View Article and Find Full Text PDFNanotechnology
May 2015
Fuel Cell Materials Group, Energy Technology Research Institute, National Institute of Advanced Industrial Science and Technology, AIST Tsukuba Central 5, 1-1-1 Higashi, Tsukuba, Ibaraki 305-8565, Japan.
The effect of microstructure of Gd₂O₃-doped CeO₂ (GDC) films on oxygen surface exchange and diffusion is reported. Epitaxial GDC (10 mol% Gd) films up to 1 μm in thickness are prepared using pulsed laser deposition on (100) yttria-stabilized zirconia single-crystal substrates and subjected to high-temperature annealing at 1300 °C in air to induce microstructural modifications. Characterization using atomic force microscopy and transmission electron microscopy reveals granular morphologies comprised of densely packed columnar nanostructures for the as-grown GDC films; however, significant microstructural reconstruction of the entire GDC layer occurs after high-temperature annealing.
View Article and Find Full Text PDFNat Mater
May 2015
Department of Energy Conversion and Storage, Technical University of Denmark, DTU Risø Campus, DK-4000 Roskilde, Denmark.
Bismuth-oxide-based materials are the building blocks for modern ferroelectrics, multiferroics, gas sensors, light photocatalysts and fuel cells. Although the cubic fluorite δ-phase of bismuth oxide (δ-Bi2O3) exhibits the highest conductivity of known solid-state oxygen ion conductors, its instability prevents use at low temperature. Here we demonstrate the possibility of stabilizing δ-Bi2O3 using highly coherent interfaces of alternating layers of Er2O3-stabilized δ-Bi2O3 and Gd2O3-doped CeO2.
View Article and Find Full Text PDFMicrosc Microanal
August 2013
Department of Materials Science and Engineering, Hongik University 72-1 Sangsu-Dong, Mapo-Gu, Seoul 121-791, Korea.
Digital quantification of a two-dimensional structure was applied to a GDC(Gd₂O₃-doped CeO₂)/LSM(La₀.₈₅Sr₀.₁₅MnO₃) composite cathode employed for solid oxide fuel cells.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!