Interfacing microchip isoelectric focusing with on-chip electrospray ionization mass spectrometry.

J Chromatogr A

Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki, Finland. Electronic address:

Published: June 2015

In this work, we demonstrate the interfacing of microchip capillary isoelectric focusing (cIEF) with online mass spectrometric (MS) detection via a fully integrated, on-chip sheath flow electrospray ionization (ESI) emitter. Thanks to the pH-dependent surface charge of the SU-8 polymer cIEF can be successfully run in native SU-8 microchannels without need for surface pretreatment prior to analysis. On the other hand, the inherent electroosmotic flow (EOF) taking place in SU-8 microchannels at high pH can be exploited to electrokinetic mobilization of the focused pH gradient toward the MS and no external pumps are required. In addition to direct coupling of a cIEF separation channel to an ESI emitter, we developed a two-dimensional separation chip for two-step, multiplex cIEF-transient-isotachophoretic (tITP) separation. In this case, cIEF is performed in the first dimension (effective L=20mm) and tITP in the second dimension (L=35mm) followed by ESI/MS. As a result, the migration order is affected by both the pI values (cIEF) and the intrinsic electrophoretic mobilities (tITP) of the sample components. The selectivity of the separation system was shown to be different from pure cIEF or pure ITP, which allows at best for baseline separation of two compounds with nearly identical pI values. The repeatabilities of the migration times of the two-step cIEF-tITP separation were 3.1-6.8% RSD (n=3). Thanks to the short separation channel, relatively short focusing times of 60-270s (depending on the applied focusing potential) were sufficient for establishment of the pH gradient and cIEF separation of the sample components, yielding total analysis times (including loading, focusing, and mobilization) well below 10min.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.chroma.2015.04.031DOI Listing

Publication Analysis

Top Keywords

interfacing microchip
8
isoelectric focusing
8
electrospray ionization
8
esi emitter
8
su-8 microchannels
8
separation
8
cief separation
8
separation channel
8
sample components
8
cief
7

Similar Publications

'Organ-on-a-chip' technology is a promising and rapidly evolving model in biological research. This innovative microfluidic cell culture device was created using a microchip with continuously perfused chambers, populated by living cells arranged to replicate physiological processes at the tissue and organ levels. By consolidating multicellular structures, tissue-tissue interfaces, and physicochemical microenvironments, these microchips can replicate key organ functions.

View Article and Find Full Text PDF

Capillary zone electrophoresis (CZE) is gaining attention in the field of single-cell proteomics for its ultra-low-flow and high-resolution separation abilities. Even more sample-limited yet rich in biological information are phosphoproteomics experiments, as the phosphoproteome composes only a fraction of the whole cellular proteome. Rapid analysis, high sensitivity, and maximization of sample utilization are paramount for single-cell analysis.

View Article and Find Full Text PDF

Laser-induced adhesives with excellent adhesion enhancement and reduction capabilities for transfer printing of microchips.

Sci Adv

December 2024

Huanjiang Laboratory, Department of Engineering Mechanics, Soft Matter Research Center, Key Laboratory of Soft Machines and Smart Devices of Zhejiang Province, State Key Laboratory of Brain-Machine Intelligence, Zhejiang University, Zhejiang, China.

Transfer printing based on tunable and reversible adhesive that enables the heterogeneous integration of materials is essential for developing envisioned electronic systems. An adhesive with both adhesion enhancement and reduction capabilities in a rapid and selective manner is challenging. Here, we report a laser-induced adhesive, featuring a geometrically simple shape memory polymer layer on a glass backing, with excellent adhesion modulation capability for programmable pickup and noncontact printing of microchips.

View Article and Find Full Text PDF

CO Microbubbles in Silicone Oil (Part I: Study of the Frequency of Formation).

Langmuir

January 2025

Grupo de Medios Porosos - Facultad de Ingeniería, Universidad de Buenos Aires, Av. Paseo Colón 850, C1063ACV Ciudad Autónoma de Buenos Aires, Argentina.

The objective of this work is the study of gas microbubble dissolution in a carrier liquid. To achieve this, we will analyze, using microfluidic techniques, the formation and evolution of carbon dioxide (CO) gas microbubbles in silicone oil, monitoring the size, position, and distance between the formed bubbles as they advance through a microchannel. This work consists of two parts (Part I and Part II): in Part I, we analyze the mechanisms determining the variation in the spatial frequency of bubbles as they move through the microchannel, while Part II examines the evolution of their size and demonstrates the utility of the device for obtaining diffusion coefficients and Henry's constant for the gases used.

View Article and Find Full Text PDF

Transmitting meaningful information into brain circuits by electronic means is a challenge facing brain-computer interfaces. A key goal is to find an approach to inject spatially structured local current stimuli across swaths of sensory areas of the cortex. Here, we introduce a wireless approach to multipoint patterned electrical microstimulation by a spatially distributed epicortically implanted network of silicon microchips to target specific areas of the cortex.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!