Concept of a multichannel spin-resolving electron analyzer based on Mott scattering.

J Synchrotron Radiat

Swiss Light Source, Paul Scherrer Institute, CH-5232 Villigen-PSI, Switzerland.

Published: May 2015

The concept of a multichannel electron spin detector based on optical imaging principles and Mott scattering (iMott) is presented. A multichannel electron image produced by a standard angle-resolving (photo) electron analyzer or microscope is re-imaged by an electrostatic lens at an accelerating voltage of 40 kV onto the Au target. Quasi-elastic electrons bearing spin asymmetry of the Mott scattering are imaged by magnetic lenses onto position-sensitive electron CCDs whose differential signals yield the multichannel spin asymmetry image. Fundamental advantages of this concept include acceptance of inherently divergent electron sources from the electron analyzer or microscope focal plane as well as small aberrations achieved by virtue of high accelerating voltages, as demonstrated by extensive ray-tracing analysis. The efficiency gain compared with the single-channel Mott detector can be a factor of more than 10(4) which opens new prospects of spin-resolved spectroscopies in application not only to standard bulk and surface systems (Rashba effect, topological insulators, etc.) but also to buried heterostructures. The simultaneous spin detection combined with fast CCD readout enables efficient use of the iMott detectors at X-ray free-electron laser facilities.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4786086PMC
http://dx.doi.org/10.1107/S160057751500363XDOI Listing

Publication Analysis

Top Keywords

electron analyzer
12
mott scattering
12
concept multichannel
8
multichannel electron
8
analyzer microscope
8
spin asymmetry
8
electron
7
multichannel spin-resolving
4
spin-resolving electron
4
analyzer based
4

Similar Publications

The study aimed to compare the effects of different types of excimer laser keratectomy on rabbit corneas and to identify the optimal disease model for corneal ectasia. Additionally, investigating the structural and molecular alterations in the novel disease model helped explore the mechanisms underlying biomechanical cues in corneal ectasia. 2.

View Article and Find Full Text PDF

The incorporation of reinforcing fillers into natural rubber latex (NR) to achieve superior elasticity and mechanical properties has been widely applied across various fields. However, the tendency of reinforcing fillers to agglomerate within NR limits their potential applications. In this study, multi-walled carbon nanotube (MWCNT)-silica (SiO)/NR composites were prepared using a solution blending method, aiming to enhance the performance of NR composites through the synergistic effects of dual-component fillers.

View Article and Find Full Text PDF

This study evaluated the effect of oral cavity environmental factors on the friction and wear of materials used in 3D-printed orthodontic devices. Commercial materials GR-10 (Pro3Dure) and NextDent SG (NextDent) were examined, with samples produced using ASIGA UV MAX and Phrozen Shuffle Lite 3D printers. Our tests included measurements of hardness, stiffness, elastic modulus, cyclic loading, scratch resistance, and tribological assessments in oscillatory motion.

View Article and Find Full Text PDF

In this study, a binary composite adsorbent based on activated carbon and phosphoric acid geopolymer foam (ACP) was prepared by combining phosphoric acid geopolymer (PAGP) with activated carbon (AC) and applied for the removal of methylene blue (MB). Activated carbon was thoroughly mixed with a mixture of fly ash and metakaolin in varying ratios, followed by phosphoric acid activation and thermal curing. The ACP adsorbent was characterized using scanning electron microscope (SEM), Fourier transform infrared (FTIR) spectrophotometer, X-ray diffractometer (XRD), surface area analyser (SAP), and thermogravimetric analyser (TGA).

View Article and Find Full Text PDF

Degradation mechanism of PGNa by the immobilized degrading enzymes from magnetic fermentation residue biochar.

Sci Total Environ

February 2025

Engineering Research Center of Resource Utilization of Carbon-containing Waste with Carbon Neutrality, Ministry of Education, East China University of Science and Technology, Shanghai 200237, China; State Key Laboratory of Coal Liquification, Gasification and Utilization with High Efficiency and Low Carbon Technology, East China University of Science and Technology, Shanghai 200237, China. Electronic address:

The development of a method to efficiently remove high concentrations of penicillin G sodium (PGNa) from the environment is important for human and animal health and safety. In this study, the degradative enzymes were immobilized by adsorption using biochar from penicillin fermentation waste residue, which could efficiently remove PGNa (900 mg/L) from an aqueous solution, with a removal rate of 99.84 % within 20 min.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!