Microfluidic droplet-based liquid-liquid extraction: online model validation.

Lab Chip

Department of Chemical Engineering, Faculty of Chemistry and Chemical Technology, University of Ljubljana, Vecna pot 113, 1000 Ljubljana, Slovenia.

Published: May 2015

Droplet-based liquid-liquid extraction in a microchannel was studied, both theoretically and experimentally. A full 3D mathematical model, incorporating convection and diffusion in all spatial directions along with the velocity profile, was developed to depict the governing transport characteristics of droplet-based microfluidics. The finite elements method, as the most common macroscale simulation technique, was used to solve the set of differential equations regarding conservation of moment, mass and solute concentration in a two-domain system coupled by interfacial surface of droplet-based flow pattern. The model was numerically verified and validated online by following the concentrations of a solute in two phases within the microchannel. The relative azobenzene concentration profiles in a methanol/n-octane two-phase system at different positions along the channel length were retrieved by means of a thermal lens microscopic (TLM) technique coupled to a microfluidic system, which gave results of high spatial and temporal resolution. Very good agreement between model calculations and online experimental data was achieved without applying any fitting procedure to the model parameters.

Download full-text PDF

Source
http://dx.doi.org/10.1039/c4lc01460jDOI Listing

Publication Analysis

Top Keywords

droplet-based liquid-liquid
8
liquid-liquid extraction
8
model
5
microfluidic droplet-based
4
extraction online
4
online model
4
model validation
4
validation droplet-based
4
extraction microchannel
4
microchannel studied
4

Similar Publications

Peptide-Based Biomimetic Condensates via Liquid-Liquid Phase Separation as Biomedical Delivery Vehicles.

Biomacromolecules

September 2024

College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu 610065, China.

Biomolecular condensates are dynamic liquid droplets through intracellular liquid-liquid phase separation that function as membraneless organelles, which are highly involved in various complex cellular processes and functions. Artificial analogs formed via similar pathways that can be integrated with biological complexity and advanced functions have received tremendous research interest in the field of synthetic biology. The coacervate droplet-based compartments can partition and concentrate a wide range of solutes, which are regarded as attractive candidates for mimicking phase-separation behaviors and biophysical features of biomolecular condensates.

View Article and Find Full Text PDF

Multiscale Approach for Tuning Communication among Chemical Oscillators Confined in Biomimetic Microcompartments.

Acc Chem Res

September 2024

Sorbonne Université, CNRS, PHysico-chimie des Electrolytes et Nanosystèmes InterfaciauX (PHENIX), F-75005 Paris, France.

ConspectusInspired by the biological world, new cross-border disciplines and technologies have emerged. Relevant examples include systems chemistry, which offers a bottom-up approach toward chemical complexity, and bio/chemical information and communication technology (bio/chemical ICT), which explores the conditions for propagating signals among individual microreactors separated by selectively permeable membranes. To fabricate specific arrays of microreactors, microfluidics has been demonstrated as an excellent method.

View Article and Find Full Text PDF
Article Synopsis
  • Actin filaments need to be organized into bundles for important cellular activities like movement and division, with the process controlled by actin-binding proteins.
  • Recent findings show that proteins like VASP can form liquid-like droplets, which help in bundling filaments by allowing polymerization to occur within these droplets.
  • As actin grows within the droplets, it forms rigid rings that eventually evolve into linear bundles, indicating the liquid nature of the droplets is crucial for proper filament arrangement in structures like filopodia and stress fibers.
View Article and Find Full Text PDF

Herein, an in-syringe gas-controlled density tunable solidification of a floating organic droplet-based dispersive liquid-liquid microextraction method was employed for the extraction of aflatoxin M and M from cow milk samples prior to their quantification with high-performance liquid chromatography equipped with a fluorescence detector. In this method, after precipitating the proteins of the sample using a zinc sulfate solution, the supernatant phase was transferred into a barrel of a glass syringe, with the end closed with a septum containing a mixture of menthol, phenylacetic acid DES (as the extraction solvent), and chloroform (as a density modifier). After that, an inert gas was bubbled into the syringe.

View Article and Find Full Text PDF

A magnetic dispersive solid phase extraction method combined with solidification of floating organic droplet-based dispersive liquid-liquid microextraction has been validated for the extraction of polycyclic aromatic hydrocarbons from honey samples. For this purpose, a carbonised cellulose-ferromagnetic nanocomposite was used as a sorbent through the magnetic dispersive solid phase extraction. For preparation of the sorbent, first, carbonised cellulose nanoparticles were created by treating cellulose filter paper with concentrated solution of sulfuric acid.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!