Green waste aged 2 and 24months, labeled "fresh" and "aged" green waste, respectively, were placed in biocover test cells and evaluated for their ability to oxidize methane (CH4) under high landfill gas loading over a 15-month testing period. These materials are less costly to produce than green waste compost, yet satisfied recommended respiration requirements for landfill compost covers. In field tests employing a novel gas tracer to correct for leakage, both green wastes oxidized CH4 at high rates during the first few months of operation - 140 and 200g/m(2)/day for aged and fresh green waste, respectively. Biocover performance degraded during the winter and spring, with significant CH4 generated from anaerobic regions in the 60-80cm thick biocovers. Concurrently, CH4 oxidation rates decreased. Two previously developed empirical models for moisture and temperature dependency of CH4 oxidation in soils were used to test their applicability to green waste. Models accounted for 68% and 79% of the observed seasonal variations in CH4 oxidation rates for aged green waste. Neither model could describe similar seasonal changes for the less stable fresh green waste. This is the first field application and evaluation of these empirical models using media with high organic matter. Given the difficulty of preventing undesired CH4 generation, green waste may not be a viable biocover material for many climates and landfill conditions.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.wasman.2015.01.042DOI Listing

Publication Analysis

Top Keywords

green waste
36
ch4 oxidation
12
waste
9
green
9
waste biocover
8
ch4 high
8
fresh green
8
oxidation rates
8
empirical models
8
ch4
7

Similar Publications

Novel Nonaqueous PD/PZ/NMP Absorbent for Energy-Efficient CO Capture: Insights into the Crystal-Phase Regulation Mechanism of the Powdery Product.

Environ Sci Technol

January 2025

School of Environmental Science and Engineering, Shenzhen Key Laboratory of Municipal Solid Waste Recycling Technology and Management, Southern University of Science and Technology, Shenzhen 518055, China.

Solid-liquid biphasic absorbents are a promising solution for overcoming the high-energy consumption challenge faced by liquid amine-based CO capture technologies. However, their practical applications are often hindered by difficulties in separating viscous solid-phase products. This study introduces a novel nonaqueous absorbent system (PD/PZ/NMP) composed of 4-amino-1-methylpiperidine (PD), piperazine (PZ), and -methyl-2-pyrrolidone (NMP), engineered to produce easily separable powdery products.

View Article and Find Full Text PDF

Polyurethanes (PU) make up a large portion of commodity plastics appearing in applications including insulation, footwear, and memory foam mattresses. Unfortunately, as thermoset polymers, polyurethanes lack a clear path for recycling and repurposing, creating a sustainability issue. Herein, using dynamic depolymerization, we demonstrate a simple one-pot synthesis for preparation of an upcycled polyurethane grafted graphene material (PU-GO).

View Article and Find Full Text PDF

Utilization of a Solid Waste Inhibitor for the Clean Flotation Enrichment of Phosphate Ores.

Langmuir

January 2025

State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Yunnan Key Laboratory of Green Separation and Enrichment of Strategic Mineral Resources, Faculty of Land Resources Engineering, Kunming University of Science and Technology, Kunming 650093, China.

The accumulation of phosphogypsum (PG) in the phosphorus chemical industry poses significant environmental challenges. Therefore, developing a harmless utilization method is crucial for alleviating these burdens and promoting sustainable industry practices. In this study, PG was used as a flotation inhibitor, enabling the flotation separation of apatite and dolomite based on the main components and dissolution behavior of PG.

View Article and Find Full Text PDF

Metallic nanostructures play a vital role in technological advancement, providing exceptional performance and improved adaptability in comparison to their bulk equivalents. Conventional synthesis techniques frequently depend on dangerous reducing agents to transform metal ions into Nanoparticles (NPs), which presents considerable environmental and health issues. In contrast, the approach of green synthesis, which emphasizes the use of non-toxic reagents, has garnered significant interest as a sustainable method for the fabrication of Metallic Nanoparticles (MNPs).

View Article and Find Full Text PDF

LiFeMnPO (0 < < 1) has a high operating voltage range and theoretical energy density, but its actual capacity decreased due to its low electronic conductivity. To overcome this problem, we successfully prepared LiFeMnPO/C (LFMP/C) with a uniform carbon coating by a one-step solvothermal method using bamboo shavings as the carbon source. The results showed that heating at a reaction temperature of 180 °C for 18 h was the optimal synthesis condition to obtain LFMP/C.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!