The activated carbon obtained from the shells of Macoré fruit was used as an adsorbent for the removal of dyes such as methylene blue (MB) and methyl orange (MO) from synthetic contaminated aqueous solutions. It holds that the adsorption is more favourable at acidic pH, with an optimum adsorption at pH = 2. At this pH, the adsorption rate is more than 98% for the two dyes. The sorption capacity was enhanced by increasing the amount of activated carbon. Above room temperature, the adsorption rates remain constant at a value of approximately 99%. The study of the adsorption kinetics indicates that the adsorption on the studied dyes follows second-order kinetics. The isotherm adsorption data were found to be described by both Langmuir and Freundlich. In addition, the thermodynamic studies revealed that the adsorption process is a favourable, endothermic and spontaneous phenomenon.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.jenvman.2015.03.006 | DOI Listing |
Environ Sci Technol
January 2025
Eawag, Swiss Federal Institute of Aquatic Science and Technology, Dübendorf 8600, Switzerland.
Recent emphasis on the development of safe-and-sustainable-by-design chemicals highlights the need for methods facilitating the early assessment of persistence. Activated sludge experiments have been proposed as a time- and resource-efficient way to predict half-lives in simulation studies. Here, this persistence "read-across" approach was developed to be more broadly and robustly applicable.
View Article and Find Full Text PDFJ Colloid Interface Sci
January 2025
State Key Laboratory of Featured Metal Materials and Life-cycle Safety for Composite Structures, MOE Key Laboratory of New Processing Technology for Nonferrous Metals and Materials, and School of Resources, Environment and Materials, Guangxi University, Nanning 530004, PR China. Electronic address:
Metal-organic frameworks (MOFs) due to abundant apertures, adjustable components, and multi-purpose structures have broad application prospects in supercapacitors. However, its low conductivity, poor stability, and difficulty growing evenly on the conductive substrate limit the electrochemical energy storage performance. Herein, with FeCoNi-OH nanosheets serving as the precursors, the trimetallic FeCoNi-MOF (FCNM) multilayer structure is successfully synthesized on activated carbon cloth (AC), and its optimal growth state (FCNM/AC-12 h) is achieved by regulating the reaction time.
View Article and Find Full Text PDFPLoS One
January 2025
Department of Mathematics and Statistics, University of Energy and Natural Resources, Sunyani, Ghana.
Access to clean and efficient cooking fuel is crucial for promoting good health, safeguarding the environment, and driving economic growth. Despite efforts to promote the adoption of cleaner alternatives, traditional solid fuels such as charcoal and firewood remain prevalent in Ghana. In this study, we utilized a statistical mechanical model as a framework to explore the statistical relationship between socio-economic factors such as educational attainment, wealth status, place of residence, and cooking fuel choices.
View Article and Find Full Text PDFEnviron Sci Pollut Res Int
January 2025
Department of Instrumentation and Control Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, India.
Ciprofloxacin (CIP) is an extensively used broad-spectrum, fluoroquinolone antibiotic used for treating diverse bacterial infections. Effluent treatment plants (ETPs) worldwide lack technologies to detect or remediate antibiotics. CIP reaches the aquatic phase primarily due to inappropriate disposal practices, lack of point-of-use sensing, and preloaded activated charcoal filter at ETPs.
View Article and Find Full Text PDFHeliyon
January 2025
Department of Chemistry, Yazd Branch, Islamic Azad University, Yazd, Iran.
In this research, activated carbon from banana peel (BPAC) was prepared by calcination (600 °C) method. Nano composites MO@BPAC (MO=NiO, CuO and ZnO) were prepared and then were characterized by XRD, FTIR, FESM, EDX, BETand TGA methods. Formation of MO@BPAC nanocomposites was confirmed by analysis methods.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!