AI Article Synopsis
- A new, easy, and scalable method is introduced for creating reduced graphene oxide hydrogels through electrodeposition.
- These hydrogels were tested as electrodes in supercapacitors, demonstrating impressive energy storage capabilities.
- Specific capacitance values of 147 F g(-1) and 223 F g(-1) were recorded with different electrolytes, indicating high performance at a current density of 10 A g(-1).
Article Abstract
We report both a facile, scalable method to prepare reduced graphene oxide hydrogels through the electrodeposition of graphene oxide and its use as an electrode for high-performance supercapacitors. Such systems exhibited specific capacitances of 147 and 223 F g(-1) at a current density of 10 A g(-1) when using H2SO4 and H2SO4 + hydroquinone redox electrolytes, respectively.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1039/c4nr07508k | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Light-activated nanocomposite thin sheet for high throughput contactless biomolecular delivery into hard-to-transfect cells.
Analyst
January 2025
Department of Engineering Design, Indian Institute of Technology Madras, India.
High throughput intracellular delivery of biological macromolecules is crucial for cell engineering, gene expression, therapeutics, diagnostics, and clinical studies; however, most existing techniques are either contact-based or have throughput limitations. Herein, we report a light-activated, contactless, high throughput photoporation method for highly efficient and viable cell transfection of more than a million cells within a minute. We fabricated reduced graphene oxide (rGO) nanoflakes that was mixed with a polydimethylsiloxane (PDMS) nanocomposite thin sheet with an area of 3 cm and a thickness of ∼600 μm.
View Article and Find Full Text PDFTetramethylguanidine-Modified Graphene Oxide as a Gel Polymer Electrolyte Additive for Improving the Performance of Flexible Zinc-Air Batteries.
Small
January 2025
School of Mechanical Engineering, Guangxi University, Nanning, 530004, P. R. China.
Flexible zinc-air batteries (FZABs) present a promising solution for the next generation of power sources in wearable electronics, owing to their high energy density, cost-effectiveness, and safety. However, solid-state electrolytes for FZABs continue to face challenges related to rapid water loss and low ionic conductivity. In this study, a hydrophilic and stable tetramethylguanidine-modified graphene oxide as an additive, which is incorporated into sodium polyacrylate to develop a high-performance gel polymer electrolyte (GPE), is designed.
View Article and Find Full Text PDFPolydopamine-integrated cellulose/graphene oxide monoliths: A versatile platform for efficient continuous-flow iodine capture and photothermal-enhanced reduction of Cr(VI).
Carbohydr Polym
March 2025
Department of Polymer Engineering, Pukyong National University, 45 Yongso-ro, Nam-gu, Busan 48513, Republic of Korea. Electronic address:
The global challenge of wastewater contamination, especially from persistent pollutants like radioactive isotopes and heavy metals, demands innovative purification solutions. Radioactive iodine isotopes (I and I), stemming from nuclear activities, pose serious health risks due to their mobility, bioaccumulation, and ionizing radiation, particularly impacting thyroid health. Similarly, hexavalent chromium, Cr(VI), is highly toxic and persistent in water, linked to cancer and other severe health issues.
View Article and Find Full Text PDFSuperelastic bamboo cellulose nanofiber based carbon aerogel with layered network microstructure for high sensitivity piezoresistive sensor.
Int J Biol Macromol
January 2025
School of Materials & Chemistry Architecture, Anhui Agricultural University, Anhui Healthy Sleep Home Furnishings Engineering Research Center, Hefei 230036, China. Electronic address:
Carbon aerogels, characterized by their high porosity and superior electrical performance, present significant potential for the development of highly sensitive pressure sensors. However, facile and cost-effective fabrication of biomass-based carbon aerogels that concurrently possess high sensitivity, high elasticity, and excellent fatigue resistance remains a formidable challenge. Herein, a piezoresistive sensor with a layered network microstructure (BCNF-rGO-CS) was successfully fabricated using bamboo nanocellulose fiber (BCNF), chitosan (CS), and graphene oxide (GO) as raw materials.
View Article and Find Full Text PDFThis study developed a novel PbS-rGO composite counter electrode to enhance the performance of quantum dot-sensitized solar cells (QDSSCs). The composite was synthesized a hydrothermal method by anchoring PbS nanocubes onto reduced graphene oxide (rGO) sheets. The effect of the mass ratio of rGO to PbS (0.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!