After base treatment of ZSM-5 crystals below 100 nm in size, TEM shows hollow single crystals with a 10 nm shell. SEM images confirm that the shell is well- preserved even after prolonged treatment. Determination of the Si/Al ratios with AAS and XPS in combination with argon sputtering reveals aluminum zoning of the parent zeolite, and the total pore volume increases in the first two hours of base treatment. In corresponding TEM images, the amount of hollow crystals are observed to increase during the first two hours of base treatment, and intact crystals are visible even after 10 h of leaching; these observations indicate different dissolution rates between individual crystals. TEM of large, commercially available ZSM-5 crystals shows inhomogeneous distribution of mesopores among different crystals, which points to the existence of structural differences between individual crystals. Only tetrahedrally coordinated aluminum is detected with (27) Al MAS NMR after the base leaching of nano-sized ZSM-5.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/chem.201406182 | DOI Listing |
Nanoscale
November 2024
Frontiers Science Center for New Organic Matter, College of Chemistry, Nankai University, Tianjin 300071, China.
Self-pillared pentasil (SPP) zeolites have received considerable interest due to their distinctive intergrowth structure, while the precise process and mechanism for the formation of SPP zeolites remain obscure. Herein, SPP zeolites (ZSM-5) have been successfully synthesized by pre-aging an Al-rich gel without employing any organic templates or seeds for the first time. The as-synthesized SPP zeolites possess a notably high external surface area while the micropores for Ar adsorption are partially blocked by excess Na, which can be fully recovered by Mg or H exchange.
View Article and Find Full Text PDFJ Am Chem Soc
December 2024
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing & State Key Laboratory of Silicate Materials for Architectures & School of Chemistry, Chemical Engineering and Life Sciences & Foshan Xianhu Laboratory & Laoshan Laboratory & School of Materials Science and Engineering & International School of Materials Science and Engineering & Nanostructure Research Centre, Wuhan University of Technology, Wuhan 430070, China.
Zeolites, the most technically important crystalline microporous materials, are indispensable cornerstones of chemical engineering because of their remarkable catalytic properties and adsorption capabilities. Numerous studies have demonstrated that the hierarchical engineering of zeolites can maximize accessible active sites and improve mass transport, which significantly decreases the internal diffusion limits to achieve the desired performance. However, the construction of hierarchical zeolites with ordered alignments and size-controlled substructures in a convenient way is highly challenging.
View Article and Find Full Text PDFSmall
October 2024
Department of Applied Chemistry, Faculty of Science and Engineering, Waseda University, 3-4-1 Okubo, Shinjuku-ku, Tokyo, 169-8555, Japan.
The synthesis of mesoporous zeolites has garnered attention with regard to improving their catalytic and adsorption performances. While the hard-templating method provides opportunities to design precisely controlled hierarchical micro- and mesoporous structures, synthesizing mesoporous zeolites without external precipitation requires significant work. This is mainly due to the absence of usable templates other than carbon with hydrophobic surfaces.
View Article and Find Full Text PDFMolecules
September 2024
ENSICAEN, UNICAEN, CNRS, Laboratoire Catalyse et Spectrochimie, Normandie University, 14000 Caen, France.
In this study, we assessed the quantity, strength, and acidity of zeolite composites comprising Silicalite-1 grown on ZSM-5 crystals using a combination of infrared (IR) and solid-state nuclear magnetic resonance (NMR) spectroscopy. The composites were created through the direct growth of Silicalite-1 crystals on ZSM-5 (P_ZSM-5), either with or without the organic structure-directing agent (OSDA) introduced into the ZSM-5 channels (samples: H_ZSM-5_Sil1 and TPA_ZSM-5_Sil1). The results revealed that Silicalite-1 grew differently when the ZSM-5 core was in the H form (empty pores) compared to when the OSDA was still present in the sample.
View Article and Find Full Text PDFGreen Chem
October 2024
Laboratory of Industrial Chemistry and Reaction Engineering, Johan Gadolin Process Chemistry Centre, Åbo Akademi University Henriksgatan 2 20500 Turku/Åbo Finland
Dendritic ZSM-5 zeolites were investigated in the isomerization of monoterpene epoxides, including limonene-1,2-epoxide (LE), α-pinene epoxide, and β-pinene epoxide, which yields high-value compounds used in fragrances, cosmetics, and pharmaceuticals. The fresh catalysts were thoroughly characterized using XRD, Ar physisorption, pyridine-FTIR, TEM, FTIR/DTBPyr, and Al MAS NMR. In comparison with conventional and hierarchical ZSM-5 materials, the dendritic zeolite with a crystallization time of 4 days (d-ZSM-5/4d) was the most active material, with a turnover frequency value of 4.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!