Intensive lignite and glass sand mining and industrial processing release waste which may contain elements hazardous to the aquatic ecosystem and constitute a potential risk to human health. Therefore, their levels must be carefully controlled. As a result, we examined the effects of sewage on the aquatic Fontinalis antipyretica moss in the Nysa Łużycka (lignite industry) and the Kwisa Rivers (glass sand industry). The Nysa Łużycka and the Kwisa Rivers appeared to be heavily polluted with As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn, which were reflected in the extremely high concentration of these elements in F. antipyretica along the studied watercourses. In the Nysa Łużycka, trace element composition in the moss species is affected by lignite industry with accumulation in its tissues of the highest concentrations of Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn, while samples from the Kwisa sites influenced by glass sand industry revealed the highest concentrations of As, V and Fe. The principal component and classification analysis classifies the concentration of elements in the aquatic F. antipyretica moss, thus enabling the differentiation of sources of water pollution in areas affected by mining industry.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4483242 | PMC |
| http://dx.doi.org/10.1007/s11356-015-4162-y | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
The Influence of Mineral Additives on Aggregate Reactivity.
Materials (Basel)
December 2024
Faculty of Civil Engineering and Geodesy, Military University of Technology, 2 Gen. Sylwestra Kaliskiego Str., 00-908 Warsaw, Poland.
In this article, the authors present the results of their research on assessing the effect of selected mineral additives on the alkaline reactivity of aggregates. The main objective of this research was to check whether the reactivity of aggregates that do not meet the standard requirements can be reduced. Due to the decreasing availability of crushed aggregates and the decreasing resources of sand used for cement concrete road surfaces, solutions should be sought that allow the use of lower-grade aggregates.
View Article and Find Full Text PDFBonding efficacy of highly translucent zirconia and lithium disilicate glass ceramics after femtosecond laser irradiation.
J Prosthodont Res
January 2025
Department of Gerodontology and Oral Rehabilitation, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo, Japan.
Purpose: This study investigated the effects of femtosecond laser (FL) irradiation on the surface roughness and shear bond strength of high-translucency zirconia (6 mol% yttria-partially stabilized zirconia [6Y-PSZ]) and lithium disilicate (LiSiO) glass ceramics.
Methods: Fully sintered square-shaped specimens of 6Y-PSZ (7 groups; 20 specimens/group) and LiSiO (8 groups; 20 specimens/group) were surface-treated via sandblasting (50-μm alumina sand or glass beads) or FL irradiation (20- or 40-μm dot or cross-line patterns) or using Monobond Etch & Prime (Ivoclar Vivadent AG; only for LiSiO specimens). The surface roughness (arithmetic average [Sa] and developed interfacial area ratio [Sdr]) and shear bond strength after 24 h and 10,000 thermal cycles were measured and statistically analyzed.
A smartphone label-free and automated thermo-analytical method based on image analysis to detect microplastics.
Sci Total Environ
January 2025
Laboratory of Biosensors and Bioanalysis (LABB), Department of Biological Chemistry, IQUIBICEN, University of Buenos Aires and CONICET, CABA, Argentina.
Microplastics (MPs) are in some ways the expected product of man-made plastics that are considered as a pollutant ubiquitous in the environment. This is particularly notorious in continental waters, along coastlines, and especially in the North Pacific Gyre, sometimes called the Pacific Garbage Patch. Even now, there is growing concern that MPs can harm wildlife, enter the food chain, and end up in the human body.
View Article and Find Full Text PDFHigh strength, self-activating ability and fast adhesion of polyurethane adhesives based on rosin structure in different environments.
Mater Horiz
December 2024
College of Chemical Engineering, Nanjing Forestry University, Jiangsu Province, Nanjing, 210037, PR China.
Underwater adhesives hold significant relevance in daily life and applications. Despite great efforts, the development of high-performance underwater adhesives through a simple and effective method remains a difficult challenge. Herein, a high adhesion and environmentally stable polyurethane underwater adhesive (DAP-PU) was developed based on rosin with a hydrogenated phenanthrene ring skeleton to design hydrophobic domains, and combined with multi-strength hydrogen bonding interactions to construct "polar hydrophobic domains".
View Article and Find Full Text PDFShort-Beam Shear Strength of New-Generation Glass Fiber-Reinforced Polymer Bars Under Harsh Environment: Experimental Study and Artificial Neural Network Prediction Model.
Polymers (Basel)
November 2024
Civil and Environmental Engineering Department, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia.
In this study, the short-beam shear strength (SBSS) retention of two types of glass fiber-reinforced polymer (GFRP) bars-sand-coated (SG) and ribbed (RG)-was subjected to alkaline, acidic, and water conditions for up to 12 months under both high-temperature and ambient laboratory conditions. Comparative assessments were also performed on older-generation sand-coated (SG-O) and ribbed (RG-O1 and RG-O2) GFRP bars exposed to identical conditions. The results demonstrate that the new-generation GFRP bars, SG and RG, exhibited significantly better durability in harsh environments and exhibited SBSS retentions varying from 61 to 100% in SG and 90-98% in RG under the harshest conditions compared to 56-69% in SG-O, 71-80% in RG-O1, and 74-88% in RG-O2.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!