Fracture strength and accelerated fatigue reliability of two zirconia abutment systems were tested. Thirty-six implants with a Morse taper (MT; n = 18) or cone (C; n = 18) design were restored with metallic crowns. Loads were applied as single load to failure (SLF) or mouth-motion cycles using a step-stress accelerated life testing (SALT) method. SLF mean values were 690 ± 430 N and 209 ± 25 for MT and C groups, respectively. In terms of the SALT results, 8 specimens survived (50,000 cycles) and 7 failed (maximum load 400 N) in the MT group; whereas for the C group all abutments failed before the maximum number of cycles. Failure mode was fracture of the Y-TZP abutments for both groups. Higher reliability for a mission of 50,000 cycles at 175 N for MT versus C designs was determined, and significant differences in fracture modes were observed.

Download full-text PDF

Source
http://dx.doi.org/10.11607/ijp.3879DOI Listing

Publication Analysis

Top Keywords

50000 cycles
8
failed maximum
8
reliability failure
4
failure modes
4
modes y-tzp
4
y-tzp abutment
4
abutment designs
4
designs fracture
4
fracture strength
4
strength accelerated
4

Similar Publications

Superoxide dismutase (SOD) and Catalase (CAT) play a crucial role as the first line of defense antioxidant enzymes in a living cell. These enzymes neutralize the superoxide anion from the autooxidation of oxyhemoglobin (Oxy-Hb) and convert hydrogen peroxides into water and molecular oxygen. In this study, we fabricated hemoglobin submicron particles (HbMPs) using the Coprecipitation Crosslinking Dissolution (CCD) technique and incorporating first-line antioxidant enzymes (CAT, SOD) and second-line antioxidant (ascorbic acid, Vit.

View Article and Find Full Text PDF

Fabricating ZnO@C composites based on shell-derived cellulose for high performance lithium-ion battery anodes.

Heliyon

December 2024

Department of Chemical, Biological & Battery Engineering, Gachon University, Seongnam-si, Gyeonggi-do, 13120, Republic of Korea.

In this study, shell-derived cellulose was successfully produced, and the hydrothermal method was employed to generate ZnO@C (ZOC) composites, which were then subjected to calcination in N gas at a temperature of 600 °C for varying durations. X-ray diffraction and thermogravimetric analyses demonstrated that the annealing duration had a substantial impact on the quantities of C and ZnO in the ZOC composites. The scanning electron microscope images indicated the presence of ZnO nanoparticles on the surface of the C phase and revealed a similar morphology among the ZOC composites.

View Article and Find Full Text PDF

This study aimed to evaluate the influence of probiotic bacteria (Pediococcus acidilactici BX-B122 and Bacillus coagulans BX-B118) on methane, carbon monoxide, and hydrogen sulfide, and fermentation profile of dietary Delonix regia seeds in ruminant. Ruminal contents from slaughtered rams and steers were used as inoculum for in vitro fermentation system. The total gas, methane, carbon monoxide, and hydrogen sulfide volume, as well as pH and dry matter degradability, were quantified in three fermentation cycles.

View Article and Find Full Text PDF
Article Synopsis
  • Green silver nanoparticles (AgNPs) were created using natural extracts and used for photocatalytic hydrogen production, promoting green energy and reducing reliance on fossil fuels.
  • These AgNPs enhanced the performance of g-CN nanosheets by broadening light absorption and improving electron transfer, leading to increased hydrogen production efficiency, particularly with AgNPs derived from coffee, green tea, and pomelo peels.
  • The study demonstrated that the combination of g-CN and AgNPs, especially from coffee, outperformed g-CN alone by efficiently producing hydrogen under low-intensity visible light, showcasing a significant step towards sustainable energy solutions.
View Article and Find Full Text PDF

The objective of this study was to identify genomic regions and genes associated with resistance to gastrointestinal nematodes in Australian Merino sheep in Uruguay, using the single-step GWAS methodology (ssGWAS), which is based on genomic estimated breeding values (GEBVs) obtained from a combination of pedigree, genomic, and phenotypic data. This methodology converts GEBVs into SNP effects. The analysis included 26,638 animals with fecal egg count (FEC) records obtained in two independent parasitic cycles (FEC1 and FEC2) and 1700 50K SNP genotypes.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!