Novel method for online monitoring of dissolved N2O concentrations through a gas stripping device.

Environ Technol

a Department of Biosystems Engineering , Ghent University, Coupure links 653, 9000 Ghent , Belgium.

Published: September 2015

Nitrous oxide emissions from wastewater treatment plants are currently measured by online gas phase analysis or grab sampling from the liquid phase. In this study, a novel method is presented to monitor the liquid phase N2O concentration for aerated as well as non-aerated conditions/reactors, following variations both in time and in space. The monitoring method consists of a gas stripping device, of which the measurement principle is based on a continuous flow of reactor liquid through a stripping flask and subsequent analysis of the N2O concentration in the stripped gas phase. The method was theoretically and experimentally evaluated for its fit for use in the wastewater treatment context. Besides, the influence of design and operating variables on the performance of the gas stripping device was addressed. This method can easily be integrated with online off-gas measurements and allows to better investigate the origin of the gas emissions from the treatment plant. Liquid phase measurements of N2O are of use in mitigation of these emissions. The method can also be applied to measure other dissolved gasses, such as methane, being another important greenhouse gas.

Download full-text PDF

Source
http://dx.doi.org/10.1080/09593330.2015.1005029DOI Listing

Publication Analysis

Top Keywords

gas stripping
12
stripping device
12
liquid phase
12
novel method
8
wastewater treatment
8
gas phase
8
n2o concentration
8
gas
7
phase
5
method
5

Similar Publications

This work focused on the biotreatment of wastewater and contaminated soil in a used oil recycling plant located in Bizerte. A continuous stirred tank reactor (CSTR) and a trickling filter (TF) were used to treat stripped and collected wastewater, respectively. The CSTR was started up and stabilized for 90 days.

View Article and Find Full Text PDF

In situ formation of LiN interlayer enhancing interfacial stability of solid-state lithium batteries.

J Colloid Interface Sci

January 2025

School of Chemical & Environmental Engineering, China University of Mining and Technology-Beijing, Beijing 100083, PR China. Electronic address:

The uneven deposition of lithium ions has raised safety concerns related to the growth of lithium dendrites on the surface of lithium metal batteries. In this work, an in situ formed LiN interlayer is introduced to regulate the deposition of lithium ions on the lithium metal surface effectively. The LiN interlayer is formed on the lithium metal surface by the reaction of nitrogen gas (N) released from the reaction layer at a specific temperature.

View Article and Find Full Text PDF

Atomically precise clusters such as [Pt(CO)(PPh)] ( = 1,2) (PPh is triphenylphosphine) are known as precursors for making oxidation catalysts. However, the changes occurring to the cluster upon thermal activation during the formation of the active catalyst are poorly understood. We have used a combination of hybrid mass spectrometry and surface science to map the thermal decomposition of [Pt(CO)(PPh)](NO).

View Article and Find Full Text PDF

Highly Efficient Photocatalytic CO-to-CO on Ni-Based Cationic Polymer with TiO-Assisted Exfoliation and Stabilization.

Angew Chem Int Ed Engl

December 2024

Key Laboratory of Material Chemistry for Energy Conversion and Storage (Ministry of Education), Hubei Key Laboratory of Material Chemistry and Service Failure, School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan, 430074, China.

Porous organic polymers have shown great potential in photocatalytic CO reduction due to their unique tunable structure favoring gas adsorption and metal sites integration. However, efficient photocatalysis in porous polymers is greatly limited by the low surface reactivity and electron mobility of bulk structure. Herein, we incorporate TiO nanoparticles and Ni(II) sites into a layered cationic imidazolium polymer (IP), in which the imidazolium moieties and free anions can stabilize the key intermediates and enhance the reaction kinetics of CO reduction.

View Article and Find Full Text PDF

Purpose: To identify areas of consensus among experts on the performance of endothelial keratoplasty by using a modified Delphi approach, to help create a framework for novice surgeons to adopt these procedures.

Methods: Thirty-one international experts in endothelial keratoplasty participated. Two rounds of electronic survey were followed by a hybrid, virtual meeting.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!