High-quality and wafer-scale graphene on insulating gate dielectrics is a prerequisite for graphene electronic applications. For such applications, graphene is typically synthesized and then transferred to a desirable substrate for subsequent device processing. Direct production of graphene on substrates without transfer is highly desirable for simplified device processing. However, graphene synthesis directly on substrates suitable for device applications, though highly demanded, remains unattainable and challenging. Here, we report a simple, transfer-free method capable of synthesizing graphene directly on dielectric substrates at temperatures as low as 600 °C using polycyclic aromatic hydrocarbons as the carbon source. Significantly, N-doping and patterning of graphene can be readily and concurrently achieved by this growth method. Remarkably, the graphene films directly grown on glass attained a small sheet resistance of 550 Ω/sq and a high transmittance of 91.2%. Organic light-emitting diodes (OLEDs) fabricated on N-doped graphene on glass achieved a current density of 4.0 mA/cm(2) at 8 V compared to 2.6 mA/cm(2) for OLEDs similarly fabricated on indium tin oxide (ITO)-coated glass, demonstrating that the graphene thus prepared may have potential to serve as a transparent electrode to replace ITO.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/nn505913v | DOI Listing |
Sci Rep
December 2024
Department of Computer Engineering, Marwadi University, Rajkot, 360003, India.
The contributed absorber design in graphene addition with the displacement of three materials for resonator design in Aluminum (Al), the middle substrate position with Titanium nitride (TiN), and the ground layer deposition by Iron (Fe) respectively. For the absorption validation highlight, the best four absorption wavelengths (µm) of 0.29, 0.
View Article and Find Full Text PDFNat Commun
December 2024
Key Laboratory for Quantum Materials of Zhejiang Province, Department of Physics, School of Science, Westlake University, 18 Shilongshan Road, Hangzhou, 310024, Zhejiang Province, China.
Extending ferroelectric materials to two-dimensional limit provides versatile applications for the development of next-generation nonvolatile devices. Conventional ferroelectricity requires materials consisting of at least two constituent elements associated with polar crystalline structures. Monolayer graphene as an elementary two-dimensional material unlikely exhibits ferroelectric order due to its highly centrosymmetric hexagonal lattices.
View Article and Find Full Text PDFNat Commun
December 2024
Department of Chemical Engineering, Electrochemical Innovation Lab, University College London, London, UK.
High-temperature proton exchange membrane fuel cells (HT-PEMFCs) offer solutions to challenges intrinsic to low-temperature PEMFCs, such as complex water management, fuel inflexibility, and thermal integration. However, they are hindered by phosphoric acid (PA) leaching and catalyst migration, which destabilize the critical three-phase interface within the membrane electrode assembly (MEA). This study presents an innovative approach to enhance HT-PEMFC performance through membrane modification using picosecond laser scribing, which optimises the three-phase interface by forming a graphene-like structure that mitigates PA leaching.
View Article and Find Full Text PDFNat Commun
December 2024
Department of Chemical Engineering, The University of Melbourne, Parkville, Victoria, Australia.
Colloidal properties of nanoparticles are intricately linked to their morphology. Traditionally, achieving high-concentration dispersions of two-dimensional (2D) nanosheets has proven challenging as they tend to agglomerate or re-stack under increased surface contact and Van der Waals attraction. Here, we unveil an excluded volume effect enabled by 2D morphology, which can be coupled with electrostatic repulsion to synthesize high-concentration aqueous graphene dispersions.
View Article and Find Full Text PDFNat Commun
December 2024
Department of Mechanical Engineering, Tsinghua University, Beijing, China.
Structural superlubricity (SSL), a state of ultralow friction and no wear between two solid surfaces in contact, offers a fundamental solution for reducing friction and wear. Recent studies find that the edge pinning of SSL contact dominates the friction. However, its nature remains mysterious due to the lack of direct characterizations on atomic scale.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!