Possibility of use of dye extract from skin samples of a seasonal, indigenous fruit from Borneo, namely Canarium odontophyllum, in dye sensitized solar cells (DSSCs) are explored. Three main groups of flavonoid pigments are detected and these pigments exhibit different UV-vis absorption properties, and hence showing different light harvesting capabilities. When applied in DSSCs. The detected pigment constituents of the extract consist of aurone (maritimein), anthocyanidin (pelargonidin) and anthocyanidin (cyanidin derivatives). When tested in DSSC, the highest conversion efficiency of 1.43% is exhibited by cyanidin derivatives, and this is followed by conversion efficiencies of 0.51% and 0.79% for aurone and pelargonidin, respectively. It is shown that individual pigments, like cyanidin derivatives and pelargonidin, exhibit higher power conversion efficiency when compared to that of C.odontophyllum skin pigment mixture (with a conversion efficiency of only 0.68%). The results indicate a possibility of masking effects of the pigments when used as a mixture. The acidification of C.odontophyllum skin pigments with concentrated hydrochloric acid improves the conversion efficiency of the mixture from 0.68% to 0.99%. The discussion in this paper will draw data and observations from the variation in absorption and adsorption properties, the HOMO-LUMO levels, the energy band gaps and the functional group compositions of the detected flavonoids.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.saa.2014.11.102 | DOI Listing |
Nanoscale Adv
December 2024
School of Electronics and Communication Engineering, Quanzhou University of Information Engineering Quanzhou Fujian China
The large amounts of attention directed towards the commercialization of renewable energy systems have motivated extensive research to develop non-precious-metal-based catalysts for promoting the electrochemical production of H and O from water. Here, we report promising technology, , electrochemical water splitting for OER and HER. This work used a simple hydrothermal method to synthesize a novel CoTe-FeC nanocomposite directly on a stainless-steel substrate.
View Article and Find Full Text PDFChem Sci
December 2024
Hunan Joint International Research Center for Carbon Dioxide Resource Utilization, State Key Laboratory of Powder Metallurgy, School of Physics, Central South University Changsha 410083 P. R. China
The development of catalytic technologies for sustainable energy conversion is a critical step toward addressing fossil fuel depletion and associated environmental challenges. High-efficiency catalysts are fundamental to advancing these technologies. Recently, field-effect facilitated catalytic processes have emerged as a promising approach in energy and environmental applications, including water splitting, CO reduction, nitrogen reduction, organic electrosynthesis, and biomass recycling.
View Article and Find Full Text PDFMater Today Bio
February 2025
Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province, College of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen, 518060, China.
Combining photothermal and chemotherapy using single nanoplatform is an emerging direction in cancer nanomedicine. Herein, a magnetic field (MF) induced combination of chemo/photothermal therapy is demonstrated using FeO@mSiO@Au core@shell@satellites nanoparticles (NPs) loaded with chemotherapeutic drug doxorubicin (DOX), both and An application of an external MF to the NPs dispersion causes magnetophoretic movement and aggregation of the NPs. While the synthesized NPs only slightly absorb light at ∼800 nm, their aggregation results in a significant near infrared (NIR) absorption associated with plasmon resonance coupling between the Au satellites in the NPs aggregates.
View Article and Find Full Text PDFHeliyon
December 2024
Center of Environment and Development, College of Development Studies, Addis Ababa University, Addis Ababa, P.O.Box 1176, Addis Ababa, Ethiopia.
Rural areas in Ethiopia serve as the primary source of charcoal for urban populations, mainly produced using traditional kilns. However, this traditional method significantly contributes to greenhouse gas (GHG) emissions, exacerbating climate change and deforestation. While banning charcoal production is not currently feasible in Ethiopia because of the lack of affordable alternative energy sources (fuel), improving the efficiency of the traditional production system can mitigate the climate impact caused by charcoal production.
View Article and Find Full Text PDFiScience
December 2024
Faculty of Mechanical Engineering, University of Ljubljana, Askerceva 6, 1000 Ljubljana, Slovenia.
In the area of thermal management, thermal control elements (TCEs) and thermal control circuits (TCCs) are proving to be innovative solutions to the challenges of temperature control and heat dissipation in various applications, ranging from electronic cooling to energy conversion and temperature control in buildings. Their integration promises to improve power density, energy efficiency, system reliability and system life expectancy. With the aim of connecting researchers in the field of thermal management and accelerating the development of TCEs and TCCs, we have developed an open-source TCC simulation tool called TCCbuilder that enables a quick and easy time-dependent 1D numerical analysis of the behavior of TCEs and TCCs.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!