Iodide is an essential element for humans and animals and insufficient intake is still a major problem. Affordable and accurate methods are required to quantify iodide concentrations in biological and environmental fluids. A simple and low cost sensing device is presented which is based on iodide induced electrochemical etching of ultrathin gold films. The sensitivity of resistance measurements to film thickness changes is increased by using films with a thickness smaller than the electron mean free path. The underlying mechanism is demonstrated by simultaneous cyclic voltammetry experiments and resistance change measurements in a buffer solution. Iodide sensing is conducted in buffer solutions as well as in lake water with limits of detection in the range of 1 μM (127 μg L(-1)) and 2 μM (254 μg L(-1)), respectively. In addition, nanoholes embedded in the thin films are tested for suitability of optical iodide sensing based on localized surface plasmon resonance.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1088/0957-4484/26/2/025202 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Solvent-modulated preparation of lead-free CsBiIpolycrystalline film for high-performance photodetectors.
Nanotechnology
January 2025
School of Instrumentation Science and Opto-electronics Engineering, Beijing Information Science and Technology University, 12 Qinghe Xiaoying East Road, Xisanqi Street, Haidian District, Beijing, Beijing, 100192, CHINA.
Lead-free cesium bismuth iodide (CsBiI) perovskite exhibits extraordinary optoelectronic properties and attractive potential in various optoelectronic devices, especially the application for photodetectors. However, most CsBiIphotodetectors demonstrated poor detection performance due to the difficulty in obtaining high-quality polycrystalline films. Therefore, it makes sense to modulate the preparation of high-quality CsBiIpolycrystalline films and expand its applications.
View Article and Find Full Text PDFA Highly Selective Probe for Real-Time Monitoring of Ethylenediamine with Ratiometric Luminescent and Colorimetric Dual-Mode Responses.
Anal Chem
January 2025
Key Laboratory of Medicinal Chemistry for Natural Resource of Yunnan, University Ministry of Education, School of Chemical Science and Technology, Yunnan University, Kunming 650091, P. R. China.
Ethylenediamine (EDA), as an important chemical raw material and fine chemical intermediate, has been widely applied in various industries. Real-time monitoring of EDA is highly desirable in daily life due to its potential threat to human health. Herein, we report a molecular probe named 4,4'-(9-carbazole-3,6-diyl)bis(1-(naphthalen-2-ylmethyl)pyridin-1-ium) iodide (p-N-DPC·I) with ratiometric luminescent and colorimetric dual-mode responses toward EDA, endowing a highly sensitive and selective detection method for its real-time monitoring.
View Article and Find Full Text PDFRecent Advances in Fluorescent Based Chemical Probes for the Detection of Perchlorate Ions.
Crit Rev Anal Chem
January 2025
SIMETRI, Inc, Winter Park, Florida, USA.
This review highlights recent advancements and challenges in fluorescence-based chemical sensors for selective and sensitive detection of perchlorate, a persistent environmental pollutant and global concern due to its health and safety implications. Perchlorate is a highly persistent inorganic pollutant found in drinking water, soil, and air, with known endocrine-disruptive properties due to its interference with iodide uptake by the thyroid gland. Human exposure mainly occurs through contaminated water and food.
View Article and Find Full Text PDFTriple-mode sensing platform for acetylcholinesterase activity monitoring and anti-Alzheimer's drug screening based on a highly stable Cu (I) compound.
Biosens Bioelectron
March 2025
College of Chemistry, Jilin University, 130012, Changchun, China. Electronic address:
Acetylcholinesterase (AChE) and AChE inhibitors play critical roles in the early diagnosis and treatment of Alzheimer's disease (AD). Herein, a fluorescence/colorimetry/smartphone triple-mode sensing platform was constructed for both AChE activity monitoring and AChE inhibitor screening by exploring a Cu (I) compound, CuI (SR) (R = CHCHNH), as a fluorescent probe. In comparison of most other fluorescent probes, CuI (SR) presented exceptional stability against pH, temperature, UV irradiation, redox agents, and metal ions, as well as good recyclability due to its unique chemical structure.
View Article and Find Full Text PDF1.4% External Quantum Efficiency 988 nm Light Emitting Diode Based on Tin-Lead Halide Perovskite.
Adv Mater
December 2024
Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 3, Groningen, 9747 AG, The Netherlands.
In recent years, metal halide perovskite-based light-emitting diodes (LEDs) have garnered significant attention as they display high quantum efficiency, good spectral tunability, and are expected to have low processing costs. When the peak emission wavelength is beyond 900 nm the interest is even higher because of the critical importance of this wavelength for biomedical imaging, night vision, and sensing. However, many challenges persist in fabricating these high-performance NIR LEDs, particularly for wavelengths above 950 nm, which appear to be limited by low radiance and poor stability.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!