Drilling of bone is a common procedure in orthopedic surgery to produce hole for screw insertion to fixate the fracture devices and implants. The increase in temperature during such a procedure increases the chances of thermal invasion of bone which can cause thermal osteonecrosis resulting in the increase of healing time or reduction in the stability and strength of the fixation. Therefore, drilling of bone with minimum temperature is a major challenge for orthopedic fracture treatment. This investigation discusses the use of fuzzy logic and Taguchi methodology for predicting and minimizing the temperature produced during bone drilling. The drilling experiments have been conducted on bovine bone using Taguchi's L25 experimental design. A fuzzy model is developed for predicting the temperature during orthopedic drilling as a function of the drilling process parameters (point angle, helix angle, feed rate and cutting speed). Optimum bone drilling process parameters for minimizing the temperature are determined using Taguchi method. The effect of individual cutting parameters on the temperature produced is evaluated using analysis of variance. The fuzzy model using triangular and trapezoidal membership predicts the temperature within a maximum error of ±7%. Taguchi analysis of the obtained results determined the optimal drilling conditions for minimizing the temperature as A3B5C1.The developed system will simplify the tedious task of modeling and determination of the optimal process parameters to minimize the bone drilling temperature. It will reduce the risk of thermal osteonecrosis and can be very effective for the online condition monitoring of the process.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1177/0954411914559738 | DOI Listing |
JBJS Essent Surg Tech
December 2024
Department of Orthopaedics and Rehabilitation, Yale School of Medicine, New Haven, Connecticut.
Background: For complete disruption of the posterolateral corner (PLC) structures, operative treatment is most commonly advocated, as nonoperative treatment has higher rates of persistent lateral laxity and posttraumatic arthritis. Some studies have shown that acute direct repair results in revision rates upwards of 37% to 40% compared with 6% to 9% for initial reconstruction. In a recent study assessing the outcomes of acute repair of PLC avulsion injuries with 2 to 7 years of follow-up, patients with adequate tissue were shown to have a much lower failure rate than previously documented.
View Article and Find Full Text PDFClin Shoulder Elb
December 2024
Department of Trauma and Orthopaedic, The Royal London Hospital, London, UK.
Background: Iatrogenic suprascapular nerve injury secondary to posterior drilling or screw penetration is a recognized complication of bone block or coracoid process transfers for anterior glenohumeral instability. We present the first cadaveric study that assesses the safety of posteroanterior reference guides and quantifies the relationship of the suprascapular nerve to posterior glenoid fixation with suture buttons.
Methods: Anterior glenoid bone block reconstruction with suture buttons utilizing a posteroanterior reference guide was performed in 10 fresh frozen cadavers via a posterior portal.
Oper Neurosurg (Hagerstown)
December 2024
Department of Neurologic Surgery, Mayo Clinic, Rochester, Minnesota, USA.
Background And Objectives: The intraosseous subarcuate loop (SL) is a unique variant of the anterior inferior cerebellar artery (AICA), where a loop of the artery is trapped in the petrous bone's subarcuate fossa (SF). Recognizing this variant is crucial for planning cerebellopontine angle (CPA) surgeries; however, data regarding its frequency and management vary in the published literature. A cohort from a single center was studied using MRI to assess its prevalence, and the findings were compared with the existing literature.
View Article and Find Full Text PDFArthrosc Tech
November 2024
Department of Orthopedics and Traumatology, Ankara Etlik City Hospital, Ankara, Turkey.
Osteonecrosis of the femoral head can lead to end-stage osteoarthritis when left untreated. The incidence has been on the rise since the onset of the COVID-19 pandemic. Core decompression of the femoral head is usually the first line of surgical treatment when conservative options fail.
View Article and Find Full Text PDFArch Orthop Trauma Surg
December 2024
Department of Orthopaedic Surgery, Cleveland Clinic, Cleveland, OH, USA.
Core decompression was developed as a joint-preserving procedure for patients with early-stage osteonecrosis of the femoral head. Previous studies indicated a high success rate that outperforms nonoperative management of pre-collapse hips. The traditional single-tunnel core decompression technique uses a cannulated drill bit inserted into the lateral cortex of the proximal femur.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!