Treated effluent discharge from uranium (U) mines and mills elevates the concentrations of U, calcium (Ca), magnesium (Mg), and sulfate (SO4 (2-) ) above natural levels in receiving waters. Many investigations on the effect of hardness on U toxicity have been experiments on the combined effects of changes in hardness, pH, and alkalinity, which do not represent water chemistry downstream of U mines and mills. Therefore, more toxicity studies with water chemistry encountered downstream of U mines and mills are necessary to support predictive assessments of impacts of U discharge to the environment. Acute and chronic U toxicity laboratory bioassays were realized with 6 freshwater species in waters of low alkalinity, circumneutral pH, and a range of chemical hardness as found in field samples collected downstream of U mines and mills. In laboratory-tested waters, speciation calculations suggested that free uranyl ion concentrations remained constant despite increasing chemical hardness. When hardness increased while pH remained circumneutral and alkalinity low, U toxicity decreased only to Hyalella azteca and Pseudokirchneriella subcapitata. Also, Ca and Mg did not compete with U for the same uptake sites. The present study confirms that the majority of studies concluding that hardness affected U toxicity were in fact studies in which alkalinity and pH were the stronger influence. The results thus confirm that studies predicting impacts of U downstream of mines and mills should not consider chemical hardness. Environ Toxicol Chem 2015;34:562-574. © 2014 The Authors. Published by Wiley Periodicals, Inc. on behalf of SETAC.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4365698 | PMC |
http://dx.doi.org/10.1002/etc.2834 | DOI Listing |
Arch Environ Contam Toxicol
January 2025
Toxicology Centre, University of Saskatchewan, 44 Campus Drive, Saskatoon, SK, S7N 5B3, Canada.
Mining operations in Canada, including uranium mining and milling, generate by-products containing radionuclides, including radium-226 (Ra), a long-lived, bioaccumulative calcium (Ca) analog. Despite strict discharge regulations, there is limited evidence to suggest that current thresholds for Ra adequately protect aquatic organisms. Furthermore, Canada lacks a federal water quality guideline for Ra, underscoring the need for protective limits to safeguard aquatic ecosystems.
View Article and Find Full Text PDFWater Environ Res
December 2024
Microsystems Fabrication Laboratory, Indian Institute of Technology Kanpur, Kanpur, UP, India.
In this study, we developed an economical treatment process for highly acidic effluents from steel rolling mills containing toxic heavy metals. Our method involves a pH-dependent approach using mining waste and hydrated lime. The treatment occurs in two steps: First, metal oxides precipitate at pH 3-3.
View Article and Find Full Text PDFPeerJ Comput Sci
July 2024
State Key Laboratory of Coking Coal Resources Green Exploitation, China University of Mining and Technology, Xuzhou, Jiangsu, China.
Microbiol Spectr
January 2025
Département de Microbiologie, Infectiologie et Immunologie, Faculté de Médecine, Centre de recherche en infectiologie du Centre de Recherche CHU de Québec, Université Laval, Québec, Canada.
Although silver is known for its antibacterial activity, its exact mode of action remains unclear. In our previous work, we described AgNbO nanoparticles (AgNbO NPs) prepared using a ceramic method, followed by high-energy and low-energy ball-milling processes, which exhibited antimicrobial activity with negligible release of Ag in deionized water. Here, we investigated thoroughly the mode of action of these AgNbO NPs against .
View Article and Find Full Text PDFJ Hazard Mater
November 2024
Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University, Kowloon, Hong Kong. Electronic address:
To address the environmental hazards of electrolytic manganese residue (EMR) accumulation and the urgent need for ecological restoration in mining areas, we developed an innovative method for creating pit restoration materials (S-EMRs) using alkaline-excited EMR via mechanical ball milling. Black liquid (BL) was used as a base exciter and EMR as the precursor. With a BL dosage of 35 %, alumina as the milling medium, a speed of 500 rpm, and milling for 20-35 min, we achieved an S-EMR compressive strength of approximately 30 MPa after 14 d-six times higher than that in conventional cement curing (C-EMR).
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!