A stable and permanent integration of miniature packed bed separation columns into microfluidic systems is a major issue in nano liquid chromatography. Various approaches like differently shaped retaining elements or the use of key stone effect have been investigated. We show a flexible integration of miniature packed bed separation columns into microfluidic chips utilising common HPLC material achieved by laser-assisted generation of narrow, photopolymerised frits. The generated retaining elements serve as an in- and outlet frits for the columns. An optimised pre-polymeric solution, consisting of butyl acrylates and a porogen, allows a precise fabrication of frit-type structures with lengths of less than 100 m and the capability to withstand common slurry packing pressures of more than 250 bar. The separation of seven polycyclic aromatic hydrocarbons by pressure-driven, reversed-phase chromatography proves the high quality of the created chromatographic column inside a glass chip. Plate heights down to 2.9 were achieved and extremely fast separations with sub-second peak widths were performed in isocratic and gradient elution modes on very short columns (≤ 25 mm).
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.chroma.2014.10.008 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Preparation of ion imprinted EDTA modified chitosan-magnetic graphene oxide for selective recovery and adsorption mechanism of Ce(III).
Sci Total Environ
January 2025
Inner Mongolia Key Laboratory of Advanced Ceramic Material and Devices, Baotou 014010, China.
Selective recovery of rare earth elements (REEs) from environmental waste is strategically significant. Herein, Ce(III) imprinted EDTA modified chitosan-magnetic graphene oxide (IIP-EDTA-CS-MGO) was prepared for selective recovery of Ce(III). Furthermore, adsorption mechanism was clarified based on versatile adsorption fittings and spectroscopic tests.
View Article and Find Full Text PDFAn innovative strategy for constructing multicore yolk-shell Si/C anodes for lithium-ion batteries.
J Colloid Interface Sci
January 2025
Key Laboratory of Green and High-end Utilization of Salt Lake Resources, Qinghai Provincial Key Laboratory of Resources and Chemistry of Salt Lakes, Qinghai Institute of Salt Lakes, Chinese Academy of Sciences, Xining, Qinghai 810008, China. Electronic address:
The yolk-shell architecture offers a promising solution to the challenges of silicon (Si) anodes in lithium-ion batteries (LIBs), particularly in addressing the significant volume changes that occur during charge and discharge cycles. However, traditional construction methods often rely on sacrificial templates and acid or alkali etching, which limits industrial applicability. In this work, we successfully constructed a silicon/carbon (Si/C) composite with a multicore yolk-shell structure using scalable spray drying technology and in-situ growth of metal-organic frameworks (MOFs) at room temperature.
View Article and Find Full Text PDFIllustration image style transfer method design based on improved cyclic consistent adversarial network.
PLoS One
January 2025
College of Arts, Anhui Xinhua University, Hefei, China.
To improve the expressiveness and realism of illustration images, the experiment innovatively combines the attention mechanism with the cycle consistency adversarial network and proposes an efficient style transfer method for illustration images. The model comprehensively utilizes the image restoration and style transfer capabilities of the attention mechanism and the cycle consistency adversarial network, and introduces an improved attention module, which can adaptively highlight the key visual elements in the illustration, thereby maintaining artistic integrity during the style transfer process. Through a series of quantitative and qualitative experiments, high-quality style transfer is achieved, especially while retaining the original features of the illustration.
View Article and Find Full Text PDFDynamic Control of Weight-Update Linearity in Magneto-Ionic Synapses.
Nano Lett
January 2025
Centre de Nanosciences et de Nanotechnologies, CNRS, Université Paris-Saclay, 91120 Palaiseau, France.
Multifunctional hardware technologies for neuromorphic computing are essential for replicating the complexity of biological neural systems, thereby improving the performance of artificial synapses and neurons. Integrating ionic and spintronic technologies offers new degrees of freedom to modulate synaptic potentiation and depression, introducing novel magnetic functionalities alongside the established ionic analogue behavior. We demonstrate that magneto-ionic devices can perform as synaptic elements with dynamically tunable depression linearity controlled by an external magnetic field, a functionality reminiscent of neuromodulation in biological systems.
View Article and Find Full Text PDFCeftobiprole activity against multidrug-resistant clinical isolates collected in the United States from 2016 through 2022.
Antimicrob Agents Chemother
January 2025
JMI Laboratories, Element Materials Technology, North Liberty, Iowa, USA.
Ceftobiprole was recently approved by the United States (US) Food and Drug Administration (FDA) for the treatment of adult patients with bacteremia, including right-side endocarditis, acute bacterial skin and skin structure infections, and community-acquired bacterial pneumonia in adults and pediatrics. Ceftobiprole is an advanced-generation cephalosporin approved in many countries for the treatment of adults with community-acquired pneumonia and hospital-acquired pneumonia, excluding ventilator-associated pneumonia. We evaluated the activities of ceftobiprole and comparators against methicillin-resistant (MRSA) and multidrug-resistant (MDR) clinical isolates.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!