A novel thermochemical conversion route has been developed that yields 5-hydroxymethylfurfural (HMF) from food waste biomass (FWB) in the presence of a heterogeneous catalysts (zirconium phosphate (ZrP)). The ZrP catalyst was prepared by precipitation followed by calcination at 400 (ZrP-400) and 600 °C (ZrP-600) and was characterized by SEM, XRD, XPS, N2 sorption and NH3-TPD. The optimized reaction conditions were identified to maximize HMF yield by varying the type of catalyst, the catalyst loading and the reaction time. The highest HMF yield achieved was 4.3%. On average 33% higher yield for ZrP-600 was obtained compared to that for ZrP-400, which might be due to higher number of acid sites on ZrP-600. The ZrP catalyst was easily regenerated by thermal treatment and showed stable activity upon its reuse. Preliminary calculations of the "minimum selling price" of HMF suggest that it is economically attractive to make this industrially-relevant chemical from FWB.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.biortech.2014.10.066 | DOI Listing |
J Am Chem Soc
January 2025
Department of Chemistry, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, South Korea.
Epoxides are versatile chemical intermediates that are used in the manufacture of diversified industrial products. For decades, thermochemical conversion has long been employed as the primary synthetic route. However, it has several drawbacks, such as harsh and explosive operating conditions, as well as a significant greenhouse gas emissions problem.
View Article and Find Full Text PDFEntropy (Basel)
January 2025
College of Computer Engineering and Sciences, Prince Sattam bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia.
The co-gasification of biomass and plastic waste offers a promising solution for producing hydrogen-rich syngas, addressing the rising demand for cleaner energy. However, optimizing this complex process to maximize hydrogen yield remains challenging, particularly when balancing diverse feedstocks and improving process efficiency. While machine learning (ML) has shown significant potential in simulating and optimizing such processes, there is no clear consensus on the most effective regression models for co-gasification, especially with limited experimental data.
View Article and Find Full Text PDFJ Environ Manage
January 2025
Thermochemical Conversion of Biomass Research Group, Department of Green Chemistry & Technology, Faculty of Bioscience Engineering, Ghent University, Coupure Links 653, B-9000, Gent, Belgium.
Modern poultry production is faced with the challenge of properly managing its associated wastes, in particular chicken manure (CM). There is a need to improve the management of CM through conversion processes that allow the production of value-added products, particularly for energy purposes, such as hydrothermal carbonization (HTC) and anaerobic digestion (AD). The objectives of this study were: i) to optimize the CM-HTC, using response surface methodology with simultaneous optimization of mass yield and higher heating value (HHV), and ii) to evaluate the biomethane potential of the process water generated from hydrochar production under the optimized condition.
View Article and Find Full Text PDFBioresour Technol
January 2025
Department of Earth Resources and Environmental Engineering, Hanyang University, Seoul 04763 Republic of Korea. Electronic address:
Alternative fuels are urgently needed to mitigate greenhouse gas emissions. This study was conducted to recover bioenergy from non-edible feedstock, an oleaginous yeast biomass obtained during fed-batch cultivation of Yarrowia lipolytica. Yeast oil (lipids) was extracted from the harvested biomass and readily converted into biodiesel using the non-catalytic transesterification method.
View Article and Find Full Text PDFJ Mol Model
January 2025
Departamento de Investigación y Desarrollo, ConsultoresAcademicos SpA, Moneda 1137, 8340457, Santiago, Chile.
Context: This study meticulously examines the criteria for assigning electron rearrangements along the intrinsic reaction coordinate (IRC) leading to bond formation and breaking processes during the pyrolytic isomerization of cubane (CUB) to 1,3,5,7-cyclooctatetraene (COT) from both thermochemical and bonding perspectives. Notably, no cusp-type function was detected in the initial thermal conversion step of CUB to bicyclo[4.2.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!