In order to investigate the penetration depth of silver nanoparticles (Ag NPs) inside the skin, porcine ears treated with Ag NPs are measured by two-photon tomography with a fluorescence lifetime imaging microscopy (TPT-FLIM) technique, confocal Raman microscopy (CRM), and surface-enhanced Raman scattering (SERS) microscopy. Ag NPs are coated with poly-N-vinylpyrrolidone and dispersed in pure water solutions. After the application of Ag NPs, porcine ears are stored in the incubator for 24 h at a temperature of 37°C. The TPT-FLIM measurement results show a dramatic decrease of the Ag NPs' signal intensity from the skin surface to a depth of 4 μm. Below 4 μm, the Ag NPs' signal continues to decline, having completely disappeared at 12 to 14 μm depth. CRM shows that the penetration depth of Ag NPs is 11.1 ± 2.1 μm. The penetration depth measured with a highly sensitive SERS microscopy reaches 15.6 ± 8.3 μm. Several results obtained with SERS show that the penetration depth of Ag NPs can exceed the stratum corneum (SC) thickness, which can be explained by both penetration of trace amounts of Ag NPs through the SC barrier and by the measurements inside the hair follicle, which cannot be excluded in the experiment.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1117/1.JBO.20.5.051006 | DOI Listing |
Molecules
December 2024
Department of Pharmaceutics and Biopharmaceutics, Philipps-Universität Marburg, Robert-Koch-Str. 4, 35037 Marburg, Germany.
The limited water solubility of active compounds remains a significant challenge for efficient dermal drug delivery, particularly for BCS class IV drugs such as curcumin. This study aimed to enhance curcumin's dermal penetration using two strategies: extracellular vesicles (EVs) and plantCrystals derived from soybeans. EVs were isolated using classical methods.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
Laboratoire de Tribologie et Dynamique des Systemes (LTDS), Ecole Centrale de Lyon, Centre National de la Recherche Scientifique, 69134 Lyon, France.
This work investigates the contact between abrasive particles and workpieces in microfinishing processes with special consideration given to the determination of unit force, unit pressure, and grain, the forces exerted by individual abrasive grains. A detailed methodology was established for measuring the contact area, penetration depth, and circumferences of grain imprints at depths corresponding to multiples of the total height of the abrasive film, represented by the parameter . The following depths were analyzed: 0.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
Institute of Polymer and Dye Technology, Faculty of Chemistry, Lodz University of Technology, Stefanowskiego Street 16, 90-537 Lodz, Poland.
In recent years, the search for more sustainable fillers for elastomeric composites than silica and carbon black has been underway. In this work, silanized starch was used as an innovative filler for elastomeric composites. Corn starch was chemically modified by silanization (with n-octadecyltrimethoxysilane) via a condensation reaction to produce a hydrophobic starch.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
Intelligent Water Networks, Melbourne, VIC 3000, Australia.
Around the world, a significant proportion of sewers and sewer maintenance holes are constructed from concrete. Unfortunately, one major problem with concrete sewer infrastructure is corrosion caused by biogenic hydrogen sulphide, which causes major issues for concrete structural integrity. Furthermore, concrete may be significantly corroded and softened but still pass a visual inspection.
View Article and Find Full Text PDFFoods
December 2024
School of Chemical Engineering, University of Birmingham, Birmingham B15 2TT, UK.
Food processing is a fundamental requirement for extending the shelf life of food products, but it often involves heat treatment, which can compromise organoleptic quality while improving food safety. Infrared (IR) radiation has emerged as a transformative technology in food processing, offering a rapid, energy-efficient method for inactivating microbial cells and spores while preserving the nutritional and sensory attributes of food. Unlike traditional heating methods, IR technology enhances heating homogeneity, shortens processing time, and reduces energy consumption, making it an environmentally friendly alternative.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!