Unlabelled: In this work, we have obtained colloidal solutions of Si nanocrystals (Si-ncs), starting from free-standing porous silicon (PSi) layers. PSi layers were synthesized using a two-electrode Teflon electrochemical cell; the etching solution contained hydrogen peroxide 30%, hydrofluoric acid 40% (HF), and methanol. The anodizing current density was varied to 250 mA cm(-2), 1 A cm(-2), and 1.2 A cm(-2). Thus obtained, PSi was mechanically pulverized in a mortar agate; then, the PSi powders were poured into different solutions to get the final Si-ncs colloidal solutions. The different optical, morphological, and structural characteristics of the colloidal solutions with Si-ncs were measured and studied. These Si-ncs colloidal solutions, measured by photoluminescence (PL), revealed efficient blue-green or violet emission intensities. The results of X-ray diffraction (XRD) indicate that the colloidal solutions are mainly composed of silicon nanocrystallites. The result of UV-vis transmittance indicates that the optical bandgap energies of the colloidal solutions varied from 2.3 to 3.5 eV for colloids prepared in methanol, ethanol, and acetone. The transmission electron microscopy (TEM) images showed the size of the nanocrystals in the colloidal solutions. Fourier transform infrared spectroscopy (FTIR) spectra showed different types of chemical bonds such as Si-O-Si, Si-CH2, and SiH x , as well as some kind of defects.
Pacs: 61.46Df.-a; 61.43.Gt; 61.05.cp; 78.55.-m; 81.15.Gh.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4199246 | PMC |
| http://dx.doi.org/10.1186/1556-276X-9-571 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Enhanced Polysulfide conversion in Room-Temperature Sodium-Sulfur batteries via nanoscale TiO modified porous carbon structures.
J Colloid Interface Sci
January 2025
School of Materials and Energy, and LONGi Institute of Future Technology, Lanzhou University, Lanzhou 730000 China. Electronic address:
Room-temperature sodium-sulfur (RT Na-S) batteries, known for their high-energy density, low cost and environmental friendliness, have attracted much attention. However, the development of RT Na-S batteries has encountered a number of challenges, including low conductivity and large volume changes of sulfur during the charge-discharge cycles. In this study, TiO nanoparticles modified porous carbon hosts for sulfur in RT Na-S batteries were prepared by a simple and efficient spray drying method combined with solution immersion.
View Article and Find Full Text PDFPhase transitions and morphology control of Langmuir Blodget (LB) films of graphene oxide.
J Colloid Interface Sci
January 2025
Research Center for Photoenergy Harvesting & Conversion Technology (phct), Department of Energy and Materials Engineering, Dongguk University, Seoul 04620, Republic of Korea. Electronic address:
Hypothesis: Understanding the Langmuir film formation process of flexible and soft materials like graphene oxide (GO) is essential, as it shows different trends compared to the conventional surface pressure-area (π-A) and compressional modulus (ε) isotherms of hard materials. Additionally, the size distribution and mechanical properties of the GO are assumed to affect the distinctive Langmuir-Blodgett (LB) film morphologies, such as overlaps and wrinkles.
Experiment: To gain a deeper insights of phase transitions in GO LB films, we propose a novel analysis of elastic tensile modulus versus surface pressure (|ε|-π) isotherms.
Synergizing RuO with Fe-doped CoRuO for boosting alkaline electrocatalytic oxygen evolution reaction.
J Colloid Interface Sci
January 2025
School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013 China. Electronic address:
Designing and development of electrocatalysts with high catalytic capacity and stability for oxygen evolution reaction (OER) is significant for sustainable water splitting. In this study, we rationally designed Fe-doped CoRuO/RuO heterostructure electrocatalysts on nickel foam (NF) through mixture hydrothermal, ion exchanging, and calcining methods. The synergistic effect between the Fe-CoRuO/RuO heterogeneous interfaces can result in superior inherent activity.
View Article and Find Full Text PDFRapid Development of High Concentration Protein Formulation Driven by High-Throughput Technologies.
Pharm Res
January 2025
BioDev Department WuXi Biologics USA, 1 Cedarbrook Dr, Cranbury, NJ, 08512, USA.
Background: High concentration protein formulation (HCPF) development needs to balance protein stability attributes such as conformational/colloidal stability, chemical stability, and solution properties such as viscosity and osmolality.
Methodology: A three-phase design is established in this work. In Phase 1, conformational and colloidal stability are measured by 384-well-based high-throughput (HT) biophysical screening while viscosity reduction screening is performed with HT viscosity screening.
A Paper-Based Sensor for the Detection of Gastroesophageal Reflux Disease Utilizing a Cleavable Fluorescent Polymer.
Adv Healthc Mater
January 2025
College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou, 310014, P. R. China.
Nowadays, gastroesophageal reflux disease (GERD) has emerged as one of the major hazards to the health of the upper gastrointestinal tract, and there is an urgent need for a low-cost, user-friendly, and non-invasive detection method. Herein, a paper-based sensor (CP sensor) for the non-invasive screening of GERD is proposed. The sensor is structured as a specially shaped cellulose paper strip embedded with fluorescent colloids, which are self-assembled from a cleavable synthetic fluorescent polymer (P4).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!