We present a novel, insoluble, low-generation polyamidoamine (PAMAM)-based polymer. The monomer and polymer were characterized by fourier transform infrared spectroscopy, electrospray ionization mass spectrometry and thermogravimetric measurement, revealing that G0 acryloyl-terminated PAMAM were synthesized and polymerized using ammonium persulfate as an initiator, producing a high-density PAMAM derivative (PAMAM-HD). PAMAM-HD was tested for its ability to remove Na(I), K(I), Ca(II), Mg(II), Cu(II), Mn(II), Cd(II), Pb(II) and Zn(II) ions from acidic, neutral and basic aqueous solutions. PAMAM-HD efficiently removed metals ions from all three solutions. The greatest absorption efficiency at neutral pH was observed against Cu(II), Cd(II) and Pb(II), and the experimental data were supported by the calculated Kd values. Our data could have a significant impact on water purification by providing an inexpensive and efficient polymer for the removal of metal ions.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jenvman.2014.09.021 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Simultaneous removal of heavy metals and inorganic nitrogen by using the biofilm of Marichromatium gracile YL28.
World J Microbiol Biotechnol
December 2024
Department of Bioengineering and Biotechnology, Huaqiao University, Xiamen, 361021, China.
Heavy metal and nitrogen contaminations are serious concerns in aquatic environments. Marichromatium gracile YL28, a marine purple sulfur bacterium, has shown great potential as a bioremediation agent for removing inorganic nitrogen from marine water. This study further investigated its ability to simultaneously absorb heavy metals, including Pb(II), Cu(II), Cd(II) and Cr(VI), and remove inorganic nitrogen.
View Article and Find Full Text PDFPerformance of Persicaria amphibia (L.) for Phytoremediation of Heavy Metals Contaminated Water.
Bull Environ Contam Toxicol
December 2024
Department of Chemistry, Faculty of Science, Ondokuz Mayıs University, Kurupelit, Samsun, 55139, Türkiye.
Fast-paced global industrialization due to population growth poses negative water implications, such as pollution by heavy metals. Phytoremediation is deemed as an efficient and environmentally friendly alternative which utilizes different types of hyperaccumulator plants known as macrophytes for the removal of heavy metal pollutants from contaminated water. In this study, the removal of Cu(II), Ni(II), Pb(II), and Cd(II) heavy metal ions contaminated water was studied by using an aquatic plant, Persicaria amphibia (L.
View Article and Find Full Text PDFSelective adsorption of copper by amidoxime modified low-temperature biochar: Performance and mechanism.
Sci Total Environ
December 2024
School of Environmental and Chemical Engineering, Shanghai University, Shanghai 200444, China. Electronic address:
Biochars prepared at 300-700 °C were functionalized with amidoxime groups to evaluate their selective adsorptive removal capabilities towards Cu(II), Cd(II), and Pb(II). The results show that the amidoxime modification significantly enhanced the the Cu(II) adsorption capacity of the biochar prepared at 300 °C (AOBC300) by 1.6 times, reaching 0.
View Article and Find Full Text PDFGreen synthesized nanoscale zero-valent iron impregnated tea residue biochar efficiently captures metal(loid)s for sustainable water remediation.
J Environ Manage
December 2024
Korea Biochar Research Center, Division of Environmental Science and Ecological Engineering, Korea University, Seoul, 02841, Korea.
Pristine or modified nanoscale zero-valent iron (nZVI) synthesized though conventional chemical reduction have been widely recommended for remediating metal(loid)-contaminated water. However, their eco-friendliness is often challenged with the concomitant bio-toxicity and secondary environmental risks. Alternatively, this study utilized waste tea leaves extract and remaining residue as the reducing agent and pyrolytic matrix to innovatively fabricate a green synthesized nZVI impregnated tea residue biochar (G-nZVI/TB).
View Article and Find Full Text PDFChitosan-based porous composites embedded with molybdenum disulfide nanosheets for removal of mercury from wastewater.
Int J Biol Macromol
December 2024
Key Laboratory for Green Processing of Chemical Engineering of Xinjiang Bingtuan, School of Chemistry and Chemical Engineering, Shihezi University, Shihezi 832003, China. Electronic address:
Mercury-containing wastewater presents a significant environmental threat due to its high toxicity. Therefore, the urgent removal of mercury-laden wastewater is essential to protect ecosystems and public health. In this study, molybdenum disulfide (MoS) nanosheets modified with a silane coupling agent (designated as MS) were crosslinked with natural polymer chitosan (CS) rich in -NH and - OH groups to develop a highly efficient and environmentally friendly MoS-functionalized three-dimensional reticulated porous materials (denoted as MS/CTS) composite adsorbent.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!