In this work, a foldable ring-shaped light-emitting diode (LED) lighting assembly, designed to attach to a rubber wound retractor, is realized and tested through porcine animal experiments. Enabled by the small size and the high efficiency of LED chips, the lighting assembly is compact, flexible, and disposable while providing direct and high brightness lighting for more uniform background illumination in video-assisted thoracic surgery (VATS). When compared with a conventional fiber bundle coupled light source that is usually used in laparoscopy and endoscopy, the much broader solid angle of illumination enabled by the LED assembly allows greatly improved background lighting and imaging quality in VATS.

Download full-text PDF

Source
http://dx.doi.org/10.1117/1.JBO.19.10.105004DOI Listing

Publication Analysis

Top Keywords

light-emitting diode
8
video-assisted thoracic
8
thoracic surgery
8
lighting assembly
8
lighting
5
compact light-emitting
4
diode lighting
4
lighting ring
4
ring video-assisted
4
surgery work
4

Similar Publications

All-inorganic perovskite materials have been widely used in various devices, including lasers, light-emitting diodes (LEDs), and solar cells, due to their exceptional optoelectronic properties. Devices utilizing high-quality single crystals are anticipated to achieve significantly enhanced performance. In this work, we present a high-performance vertical cavity surface emitting laser (VCSEL) based on a single-crystal CsPbBr microplatelet, fabricated through a simple solution process and sandwiched between two distributed Bragg reflector (DBRs).

View Article and Find Full Text PDF

Near-infrared (NIR) phosphor-converted light-emitting diode (pc-LED) has emerged as the most promising NIR light source, highlighting the importance of exploring phosphors with excellent efficiency and sufficient spectral coverage. Herein, a garnet NaCaHfGeO:Cr phosphor with an internal quantum efficiency (IQE) of 79.2% has been developed, which exhibits a relatively long wavelength NIR emission peak at 830 nm and a full width at half maximum (FWHM) of 144 nm.

View Article and Find Full Text PDF

Micro light-emitting diodes (µLEDs), crucial for advanced displays and communication systems, face efficiency challenges due to sidewall defects. This study investigates the impact of various passivation layers, including SiO, AlO, and HfO, on AlGaInP-based 620 nm red µLEDs. We fabricated devices with two mesa sizes and demonstrated that atomic layer deposition (ALD) passivation, especially with HfO, significantly enhances performance.

View Article and Find Full Text PDF

Dynamic Reconstruction of Fluid Interface Manipulated by Fluid Balancing Agent for Scalable Efficient Perovskite Solar Cells.

Adv Mater

January 2025

Institute for Advanced Materials & Guangdong Provincial Key Laboratory of Optical Information Materials and Technology, South China Academy of Advanced Optoelectronics, South China Normal University, Guangzhou, 510006, China.

Laboratory-scale spin-coating techniques are widely employed for fabricating small-size, high-efficiency perovskite solar cells. However, achieving large-area, high-uniformity perovskite films and thus high-efficiency solar cell devices remain challenging due to the complex fluid dynamics and drying behaviors of perovskite precursor solutions during large-area fabrication processes. In this work, a high-quality, pinhole-free, large-area FAPbI perovskite film is successfully obtained via scalable blade-coating technology, assisted by a novel bidirectional Marangoni convection strategy.

View Article and Find Full Text PDF

Remote epitaxial crystalline perovskites for ultrahigh-resolution micro-LED displays.

Nat Nanotechnol

January 2025

Key Laboratory of Bio-inspired Materials and Interfacial Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, China.

The miniaturization of light-emitting diodes (LEDs) is pivotal in ultrahigh-resolution displays. Metal-halide perovskites promise efficient light emission, long-range carrier transport and scalable manufacturing for bright microscale LED (micro-LED) displays. However, thin-film perovskites with inhomogeneous spatial distribution of light emission and unstable surface under lithography are incompatible with the micro-LED devices.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!