This study assessed the correlation of N95 filtering facepiece respirator (FFR) fit between a Static Advanced Headform (StAH) and 10 human test subjects. Quantitative fit evaluations were performed on test subjects who made three visits to the laboratory. On each visit, one fit evaluation was performed on eight different FFRs of various model/size variations. Additionally, subject breathing patterns were recorded. Each fit evaluation comprised three two-minute exercises: "Normal Breathing," "Deep Breathing," and again "Normal Breathing." The overall test fit factors (FF) for human tests were recorded. The same respirator samples were later mounted on the StAH and the overall test manikin fit factors (MFF) were assessed utilizing the recorded human breathing patterns. Linear regression was performed on the mean log10-transformed FF and MFF values to assess the relationship between the values obtained from humans and the StAH. This is the first study to report a positive correlation of respirator fit between a headform and test subjects. The linear regression by respirator resulted in R(2) = 0.95, indicating a strong linear correlation between FF and MFF. For all respirators the geometric mean (GM) FF values were consistently higher than those of the GM MFF. For 50% of respirators, GM FF and GM MFF values were significantly different between humans and the StAH. For data grouped by subject/respirator combinations, the linear regression resulted in R(2) = 0.49. A weaker correlation (R(2) = 0.11) was found using only data paired by subject/respirator combination where both the test subject and StAH had passed a real-time leak check before performing the fit evaluation. For six respirators, the difference in passing rates between the StAH and humans was < 20%, while two respirators showed a difference of 29% and 43%. For data by test subject, GM FF and GM MFF values were significantly different for 40% of the subjects. Overall, the advanced headform system has potential for assessing fit for some N95 FFR model/sizes.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4470384PMC
http://dx.doi.org/10.1080/15459624.2014.957832DOI Listing

Publication Analysis

Top Keywords

advanced headform
12
test subjects
12
fit evaluation
12
linear regression
12
mff values
12
fit
10
correlation respirator
8
respirator fit
8
static advanced
8
breathing patterns
8

Similar Publications

Instrumented Mouthguard Decoupling Affects Measured Head Kinematic Accuracy.

Ann Biomed Eng

October 2024

Virginia Tech (Biomedical Engineering and Mechanics), Blacksburg, VA, USA.

Many recent studies have used boil-and-bite style instrumented mouthguards to measure head kinematics during impact in sports. Instrumented mouthguards promise greater accuracy than their predecessors because of their superior ability to couple directly to the skull. These mouthguards have been validated in the lab and on the field, but little is known about the effects of decoupling during impact.

View Article and Find Full Text PDF

Due to religious tenets, Sikh population wear turbans and are exempted from wearing helmets in several countries. However, the extent of protection provided by turbans against head injuries during head impacts remains untested. One aim of this study was to provide the first-series data of turbans' protective performance under impact conditions that are representative of real-world bicycle incidents and compare it with the performance of bicycle helmets.

View Article and Find Full Text PDF

A technique for in situ intracranial strain measurement within a helmeted deformable headform.

J Mech Behav Biomed Mater

November 2023

Carleton University, Department of Mechanical and Aerospace Engineering, Ottawa, K1S 5B6, ON, Canada. Electronic address:

Despite the broad use of helmets, incidence of concussion remains high. Current methods for helmet evaluation focus on the measurement of head kinematics as the primary tool for quantifying risk of brain injury. Though the primary cause of mild Traumatic Brain Injury (mTBI) is thought to be intracranial strain, helmet testing methodologies are not able to directly resolve these parameters.

View Article and Find Full Text PDF

Concern has grown over the potential long-term effects of repeated head impacts and concussions in American football. Recent advances in impact engineering have yielded the development of soft, collapsible, liquid shock absorbers, which have demonstrated the ability to dramatically attenuate impact forces relative to existing helmet shock absorbers. To further explore how liquid shock absorbers can improve the efficacy of an American football helmet, we developed and optimized a finite element (FE) helmet model including 21 liquid shock absorbers spread out throughout the helmet.

View Article and Find Full Text PDF

Headforms are widely used in head injury research and headgear assessment. Common headforms are limited to replicating global head kinematics, although intracranial responses are crucial to understanding brain injuries. This study aimed to evaluate the biofidelity of intracranial pressure (ICP) and the repeatability of head kinematics and ICP of an advanced headform subjected to frontal impacts.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!