In patients with essential hypertension and healthy controls, plasma levels of atrial natriuretic peptide (ANP), angiotensin II (Ang II), aldosterone (Aldo), arginine vasopressin (AVP) and urinary excretion of prostaglandin E2 (PGE2) were measured under basal conditions, and before and after acute volume expansion with a 2.5% hypertonic sodium chloride solution. Tubular sodium handling was assessed by the lithium clearance technique. Under basal conditions ANP was increased in patients compared with controls (9.0 pmol/l versus 7.5 pmol/l, P less than 0.01). In response to acute volume expansion patients exhibited exaggerated increases in ANP (5.3 pmol/l versus 3.0 pmol/l, P less than 0.05), exaggerated natriuresis, and an abnormal decrease in fractional proximal and distal tubular sodium reabsorption (PFRNa and DFRNa, respectively). Furthermore, during comparable urinary flow rates, urinary PGE2 excretion was decreased in patients compared with controls (266 pg/min versus 705 pg/min, P less than 0.05). No differences were found between patients and controls in Ang II, Aldo or AVP under basal conditions. Both groups responded to hypertonic acute volume expansion with comparable decreases in Ang II and Aldo, and an increase in AVP. It is concluded that in essential hypertension ANP is increased under basal conditions and the increase in natriuresis and ANP is exaggerated during acute volume expansion. The exaggerated natriuretic response to acute volume expansion resulted from an altered handling of sodium in both proximal and distal tubules.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1097/00004872-198901000-00004 | DOI Listing |
Background: For growing healthcare organisations, anchored resources-assets that are not easily movable-may complicate expansion and distort workflow patterns. We examine work patterns at a radiation oncology department of a major Canadian hospital. As this department doubled its size, healthcare providers remained bound to treatment planning rooms and radiation machines at the original site.
View Article and Find Full Text PDFPolymers (Basel)
January 2025
Department of Physics, Washington State University, Pullman, WA 99163, USA.
This work aims to determine the mechanism of the photomechanical response of poly(Methyl methacrylate) polymer doped with the photo-isomerizable dye Disperse Red 1 using the non-isomerizable dye Disperse Orange 11 as a control to isolate photoisomerization. Samples are free-standing thin films with thickness that is small compared with the optical skin depth to assure uniform illumination and photomechanical response throughout their volume, which differentiates these studies from most others. Polarization-dependent measurements of the photomechanical stress response are used to deconvolute the contributions of angular hole burning, molecular reorientation and photothermal heating.
View Article and Find Full Text PDFJ Clin Med
January 2025
Department of Plastic, Reconstructive and Aesthetic Surgery and Hand Surgery, Centre Hospitalier Universitaire Vaudois (CHUV), 1011 Lausanne, Switzerland.
: Combining autologous fat grafting with implant placement is meant to improve the quality of implant-based breast reconstruction. The present study explores the concept of multi-stage composite breast reconstruction with repeated sessions of autologous fat grafting to increase mastectomy flap thickness and provide better pre-pectoral implant coverage. : Twenty-five consecutive patients underwent bilateral multi-stage composite expander-to-implant breast reconstruction and reverse expansion from August 2020 to April 2024.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
School of Civil Engineering, Architecture and Environment, Hubei University of Technology, Wuhan 430068, China.
To achieve resourceful utilization of dredged sludge, lightweight treatment was performed on sludge from Xunsi River in Wuhan using fly ash, cement, and expanded polystyrene (EPS) particles. Density tests and unconfined compressive strength (UCS) tests were conducted on the composite stabilized sludge lightweight soil to determine the optimal mix ratio for high-quality roadbed fill material with low self-weight and high strength. Subsequently, microstructural tests, including X-ray diffraction (XRD) and scanning electron microscopy (SEM), were conducted.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
Chair of Metal Forming and Casting, Technical University of Munich, Walther-Meissner-Strasse 4, 85748 Garching, Germany.
Deep drawing is a cost-efficient way of producing sheet metal parts in high production volumes. Prototypes and very small series are expensive due to the cost of steel-forming tools. Ultra-high-performance concrete (UHPC) tools offer a cheap and fast alternative to conventional steel-forming tools.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!