This article explores a new open-source method for developing and manufacturing high-quality scientific equipment suitable for use in virtually any laboratory. A syringe pump was designed using freely available open-source computer aided design (CAD) software and manufactured using an open-source RepRap 3-D printer and readily available parts. The design, bill of materials and assembly instructions are globally available to anyone wishing to use them. Details are provided covering the use of the CAD software and the RepRap 3-D printer. The use of an open-source Rasberry Pi computer as a wireless control device is also illustrated. Performance of the syringe pump was assessed and the methods used for assessment are detailed. The cost of the entire system, including the controller and web-based control interface, is on the order of 5% or less than one would expect to pay for a commercial syringe pump having similar performance. The design should suit the needs of a given research activity requiring a syringe pump including carefully controlled dosing of reagents, pharmaceuticals, and delivery of viscous 3-D printer media among other applications.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4167991 | PMC |
| http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0107216 | PLOS |
Publication Analysis
Top Keywords
Similar Publications
Fabrication and optimization of a multielectrode microfluidic electrochemical flow cell for fast and dynamic detection of reaction products.
MethodsX
June 2025
Department of Materials Science and Engineering, Norwegian University of Science and Technology (NTNU), NO-7491, Trondheim, Norway.
Construction and experimental validation of electrochemical cells with multiple electrodes in a microfluidic channel is described. Details of the fabrication of the electrodes and polydimethylsiloxane channel using soft lithography methods are given. Calibration of the collection efficiencies and transit times between electrodes validate the use of these cells for fast electrochemical detection of soluble species.
View Article and Find Full Text PDFPneumatic conveying inkjet bioprinting for the processing of living cells.
Biofabrication
January 2025
Research Group Anatomy, School for Medicine and Health Science, Carl von Ossietzky Universität Oldenburg, Oldenburg, Germany.
Inkjet printing techniques are often used for bioprinting purposes because of their excellent printing characteristics, such as high cell viability and low apoptotic rate, contactless, commercial availability, and low cost. However, they face some disadvantages, such as the use of bioinks of low viscosity, cell damage due to shear stress caused by drop ejection and jetting velocity, as well as a narrow range of available bioinks that still challenge the inkjet printing technology. New technological solutions are required to overcome these obstacles.
View Article and Find Full Text PDFA single-centre randomised controlled trial comparing the standard method and target-controlled infusion as a method of administering cefoxitin, which is used to prevent surgical site infections in colorectal surgical patients: study protocol.
Trials
January 2025
Department of Anesthesiology and Pain Medicine, Asan Medical Center, University of Ulsan College of Medicine, 88, Olympic-Ro 43-Gil, Songpa-Gu, Seoul, 05505, Korea.
Background: Prophylactic parenteral administration of antibiotics is strongly recommended to prevent surgical site infection (SSI). Cefoxitin is mainly administered intravenously in colorectal surgery. The current standard method for administering prophylactic antibiotics in adults is to administer a fixed dose quickly before skin incision.
View Article and Find Full Text PDFRAFT Dispersion Polymerization of 2-Hydroxyethyl Methacrylate in Non-polar Media.
Macromolecules
December 2024
Dainton Building, Department of Chemistry, University of Sheffield, Brook Hill, Sheffield, South Yorkshire S3 7HF, U.K.
We report the reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of 2-hydroxyethyl methacrylate (HEMA) in -dodecane using a poly(lauryl methacrylate) (PLMA) precursor at 90 °C. This formulation is an example of polymerization-induced self-assembly (PISA), which leads to the formation of a colloidal dispersion of spherical PLMA-PHEMA nanoparticles at 10-20% w/w solids. PISA syntheses involving polar monomers in non-polar media have been previously reported but this particular system offers some unexpected and interesting challenges in terms of both synthesis and characterization.
View Article and Find Full Text PDFPump-Free Microfluidics for Cell Concentration Analysis on Smartphones in Clinical Settings (SmartFlow): Design, Development, and Evaluation.
JMIR Biomed Eng
December 2024
School of Interactive Computing, Georgia Institute of Technology, Atlanta, GA, United States.
Background: Cell concentration in body fluid is an important factor for clinical diagnosis. The traditional method involves clinicians manually counting cells under microscopes, which is labor-intensive. Automated cell concentration estimation can be achieved using flow cytometers; however, their high cost limits accessibility.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!