In this paper, superheated steam (SHS) was used as cost effective and green processing technique to modify oil palm mesocarp fiber (OPMF) for biocomposite applications. The purpose of this modification was to promote the adhesion between fiber and thermoplastic. The modification was carried out in a SHS oven at various temperature (200-230 °C) and time (30-120 min) under normal atmospheric pressure. The biocomposites from SHS-treated OPMFs and poly(butylene succinate) (PBS) at a weight ratio of 70:30 were prepared by melt blending technique. The mechanical properties and dimensional stability of the biocomposites were evaluated. This study showed that the SHS treatment increased the roughness of the fiber surface due to the removal of surface impurities and hemicellulose. The tensile, flexural and impact properties, as well as dimensional stability of the biocomposites were markedly enhanced by the presence of SHS-treated OPMF. Scanning electron microscopy analysis showed improvement of interfacial adhesion between PBS and SHS-treated OPMF. This work demonstrated that SHS could be used as an eco-friendly and sustainable processing method for modification of OPMF in biocomposite fabrication.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4200846 | PMC |
| http://dx.doi.org/10.3390/ijms150915344 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Improving CO Removal Efficiency with Bio-Cellulose Acetate: A Multi-Stage Membrane Separation Approach.
Polymers (Basel)
January 2025
Biomass and Oil Palm Research Center of Excellence, Walailak University, Thasala, Nakhon Si Thammarat 80160, Thailand.
In this comprehensive investigation, the sustainable production and utilization of gas separation membranes derived from coconut water (CW) waste was investigated. The research focuses on the synthesis of bacterial cellulose (BC) and cellulose acetate (CA) membranes from CW, followed by a thorough analysis of their characteristics, including morphology, ATR-FTIR spectroscopy, tensile strength, and chemical composition. The study rigorously evaluates membrane performance, with particular emphasis on CO/CH selectivity under various operational conditions, including pressure, membrane thickness, and number of stages.
View Article and Find Full Text PDFEvaluating Oil Palm Trunk Biochar and Palm Oil as Environmentally Friendly Sustainable Additives in Green Natural Rubber Composites.
Polymers (Basel)
January 2025
Faculty of Science and Industrial Technology, Prince of Songkla University, Surat Thani Campus, Surat Thani 84000, Thailand.
This research examines the possibility of palm oil and oil palm trunk biochar (OPTB) from pyrolysis effectively serving as alternative processing oils and fillers, substituting petroleum-based counterparts in natural rubber (NR) composites. Chemical, elemental, surface and morphological analyses were used to characterize both carbon black (CB) and OPTB, by using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) gas porosimetry, and scanning electron microscopy (SEM). The influences of OPTB contents from 0 to 100 parts per hundred rubber (phr) on thermal, dielectric, dynamic mechanical, and cure characteristics, and the key mechanical properties of particulate NR-composites were investigated.
View Article and Find Full Text PDFAdulteration in edible oil (mustard oil) and ghee; detection and their effects on human health.
Int J Biochem Mol Biol
December 2024
Gene Expression and Signaling Lab, Department of Zoology, Mahatma Gandhi Central University Motihari 845401, Bihar, India.
Edible oils and ghee are vital parts of our daily culinary practices. In recent years, owing to heightened demand in the domestic and global markets, consistent reports regarding the adulteration of edible oils and ghee with substandard ingredients have been reported. Adulteration in edible oils is widespread, with distinctive contaminants, including cottonseed, mineral, and lower-cost oils like palm olein.
View Article and Find Full Text PDFEfficient regeneration protocol for producing true-to-type oil palm ( (jacq.) through somatic embryogenesis from immature male inflorescence.
Heliyon
January 2025
ICAR-Indian Institute of Oil Palm Research, Pedavegi, 534 435, Eluru (Dt), Andhra Pradesh, India.
Producing homogeneous planting material in oil palm poses a significant challenge, which can be addressed through somatic embryogenesis. This study successfully achieved somatic embryogenesis using immature male inflorescence from Tenera hybrid. Modified Eeuwens medium yielded better results than the Murashige and Skoog (MS) and CHU (N6) media when supplemented with 2,4-D, picloram and α-naphthaleneacetic acid (NAA).
View Article and Find Full Text PDFThe role of membrane technology in palm oil mill effluent (POME) decontamination: Current trends and future prospects.
J Environ Manage
January 2025
Chemical Engineering Department, Faculty of Industrial Technology, Institut Teknologi Bandung, Jl. Ganesha 10, Bandung, 40132, Indonesia; Research Center for Biosciences and Biotechnology, Institut Teknologi Bandung, Jl. Ganesha 10, Bandung, 40132, Indonesia.
This article reviews the role of membrane systems in treating palm oil mill effluent (POME), a waste generated by the palm industry. The review focuses on various membrane systems such as microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO), highlighting their effectiveness in removing pollutants and recovering water. Special attention is given to hybrid systems integrating membrane bioreactors (MBRs) and other advanced processes to enhance fouling control, improve water quality, and promote sustainability.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!