The center-of-mass dynamics of star polymers in dilute solution is analyzed by hybrid mesoscale simulations. The fluid is modeled by the multiparticle collision dynamics approach, a particle-based hydrodynamic simulation technique, which is combined with molecular dynamics simulations for the polymers. Star polymers of various functionalities are considered. We determine the center-of-mass velocity correlation functions, the corresponding mean square displacements, and diffusion coefficients. The velocity correlation functions exhibit a functionality-dependent and structure-specific intermediate time regime, with a slow decay. It is followed by the long-time tail t(-3/2), which is solely determined by the fluid. Infinite-system-size diffusion coefficients are determined from the velocity correlation function by a combination of simulation and analytical results, as well as from the center-of-mass mean square displacement for various systems sizes and extrapolation. In terms of the hydrodynamic radius, the star polymer hydrodynamic diffusion coefficient exhibits the same universal system-size dependence as a spherical colloid. The functionality dependence of the ratio of hydrodynamic radii and the radii of gyration agrees well with experimental predictions.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1063/1.4893766 | DOI Listing |
ACS Appl Mater Interfaces
January 2025
Universite de Pau et des Pays de l'Adour, E2S UPPA, CNRS, IPREM, 64053, Pau, France.
The photopolymerization-induced microphase separation (photo-PIMS) process involving a reactive polymer block was implemented to fabricate nanostructured quasi-solid polymer electrolytes (QSPEs) for use in lithium metal batteries (LMBs). This innovative one-pot fabrication enhances interfacial properties in LMBs by enabling nanostructuring of QSPE directly onto the electrodes. This process also allows for customization of QSPE structural dimensions by tweaking the architecture and molar mass of poly[(oligo ethylene glycol) methyl ether methacrylate--styrene] (P(OEGMA--S)) macromolecular chain transfer agent.
View Article and Find Full Text PDFMacromol Rapid Commun
January 2025
Department of Materials Science and Engineering, National University of Singapore (NUS), 9 Engineering Drive 1, Singapore, 117575, Singapore.
The modification of thermoplastic polymers is frequently impeded by the inherent contradiction between their toughness and strength. In this study, an effective strategy to significantly improve the mechanical properties of ductile polymers by simply adding a complimentary rigid polymer is introduced. This work uses a semi-crystalline polymer aliphatic polyketone (POK) as the matrix material and a small quantity of polymethyl methacrylate (PMMA) as the rigid polymer, through establishing molecular chain entanglements at the interface to produce POK/PMMA blends with exceptional mechanical property.
View Article and Find Full Text PDFActa Biomater
January 2025
State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials; Jiangsu Key Laboratory of Advanced Functional Polymer Design and Application; Suzhou key Laboratory of Macromolecular Deign and Precision Synthesis; College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, PR China. Electronic address:
Tumor hypoxia is one of key challenges in deep tumor photodynamic therapy (PDT), and how to fix this issue is attracting ongoing concerns worldwide. This work demonstrates dually fluorinated unimolecular micelles with desirable and stable oxygen-carrying capacity, high cellular penetration, and integrative type I & II PDT for deep hypoxic tumors. Dually fluorinated star copolymers with fluorinated phthalocyanines as the core are prepared through photoinitiated electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization under irradiation with NIR LED light at room temperature, followed by assembly into unimolecular micelles.
View Article and Find Full Text PDFPolymers (Basel)
December 2024
School of Basic Education, Beijing Polytechnic College, Beijing 100042, China.
In this study, waterborne polyurethane (WPU), a novel modifier, was used for the wet surface modification of talc, and its mechanism was investigated. Polypropylene (PP)-based composites with modified talc were synthesized and subjected to an examination of their mechanical properties. The wetting contact angle demonstrated that the modified talc exhibited an excellent modification effect at a specific amount of modifier (2.
View Article and Find Full Text PDFProc Natl Acad Sci U S A
January 2025
Department of Chemistry, State Key Laboratory of Molecular Engineering of Polymers, College of Chemistry and Materials, iChem (Collaborative Innovation Center of Chemistry for Energy Materials), Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Fudan University, Shanghai 200433, China.
Emulsion interface engineering has been widely employed for the synthesis of nanomaterials with various morphologies. However, the instability of the liquid-liquid interface and uncertain interfacial interactions impose significant limitations on controllable fabrications. Here, we developed a liquid-nano-liquid interface-oriented anisotropic encapsulation strategy for fabricating asymmetric nanohybrids.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!