Direct measurement of chemical distributions in heterogeneous coatings.

Chemical warfare agents (CWA) can be absorbed by variety of materials including polymeric coatings like paints through bulk liquid contact, thus presenting touch and vapor hazards to interacting personnel. In order for accurate hazard assessments and subsequent decontamination approaches to be designed, it is necessary to characterize the absorption and distribution of highly toxic species, as well as their chemical simulant analogs, in the subsurface of engineered, heterogeneous materials. Using a combination of judicious sample preparation in concert with scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), it should be possible to directly measure the uptake and distribution of CWA simulants in the subsurface of complex multilayer coatings. Polyurethane and alkyd coatings were applied to aluminum and silicon substrates and contaminated with 2-chloroethyl ethyl sulfide (CEES) and dimethyl methylphosphonate (DMMP). The surfaces and cross-sectional interfaces of the contaminated coatings were probed with SEM-EDS to provide imaging, spectral, and elemental mapping data of the contaminant-material systems. This work demonstrated SEM-EDS capability to detect and spatially resolve unique elemental signatures of CWA simulants within military coatings. The visual and quantitative results provided by these direct measurements illustrate contaminant spatial distributions, provide order-of-magnitude approximations for diffusion coefficients, and reveal material characteristics that may impact contaminant transport into complex coating materials. It was found that contaminant uptake was significantly different between the topcoat and primer layers.