Limited information exists regarding the health risks associated with inhaling aerosols that are generated during resistance spot welding of metals treated with adhesives. Toxicology studies evaluating spot welding aerosols are non-existent. A resistance spot welding aerosol generator and inhalation exposure system was developed. The system was designed by directing strips of sheet metal that were treated with an adhesive to two electrodes of a spot welder. Spot welds were made at a specified distance from each other by a computer-controlled welding gun in a fume collection chamber. Different target aerosol concentrations were maintained within the exposure chamber during a 4-h exposure period. In addition, the exposure system was run in two modes, spark and no spark, which resulted in different chemical profiles and particle size distributions. Complex aerosols were produced that contained both metal particulates and volatile organic compounds (VOCs). Size distribution of the particles was multi-modal. The majority of particles were chain-like agglomerates of ultrafine primary particles. The submicron mode of agglomerated particles accounted for the largest portion of particles in terms of particle number. Metal expulsion during spot welding caused the formation of larger, more spherical particles (spatter). These spatter particles appeared in the micron size mode and accounted for the greatest amount of particles in terms of mass. With this system, it is possible to examine potential mechanisms by which spot welding aerosols can affect health, as well as assess which component of the aerosol may be responsible for adverse health outcomes.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.3109/08958378.2014.941118 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Intelligent Sensor Software for Robust and Energy-Sustainable Decision-Making in Welding of Steel Reinforcement for Concrete.
Sensors (Basel)
December 2024
PSYCOTRIP Group, Department of Mathematics and Computation, University of La Rioja, 26006 Logroño, Spain.
In today's industrial landscape, optimizing energy consumption, reducing production times, and maintaining quality standards are critical challenges, particularly in energy-intensive processes like resistance spot welding (RSW). This study introduces an intelligent decision support system designed to optimize the RSW process for steel reinforcement bars. By creating robust machine learning models trained on limited datasets, the system generates interactive heat maps that provide real-time guidance to production engineers or intelligent systems, enabling dynamic adaptation to changing conditions and external factors such as fluctuating energy costs.
View Article and Find Full Text PDFLiquid Metal Embrittlement Susceptibility and Crack Formation of the Zn-Coated Complex Phase Steel.
Materials (Basel)
December 2024
State Key Laboratory of Advanced Special Steel, School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China.
In the resistance spot-welding (RSW) of galvanized complex phase (CP) steel, liquid metal embrittlement (LME) may occur, deteriorating the welded joint's performance. Based on the Auto/Steel Partnership (A/SP) standard, the joints of galvanized CP steel welded with a welding current from 7.0 kA to 14.
View Article and Find Full Text PDFPredicting the Effect of RSW Parameters on the Shear Force and Nugget Diameter of Similar and Dissimilar Joints Using Machine Learning Algorithms and Multilayer Perceptron.
Materials (Basel)
December 2024
Department of Manufacturing Processes and Production Engineering, Rzeszow University of Technology, Al. Powst. Warszawy 8, 35-959 Rzeszow, Poland.
Resistance spot-welded joints are crucial parts in contemporary manufacturing technology due to their ubiquitous use in the automobile industry. The necessity of improving manufacturing efficiency and quality at an affordable cost requires deep knowledge of the resistance spot welding (RSW) process and the development of artificial neural network (ANN)- and machine learning (ML)-based modelling techniques, apt for providing essential tools for design, planning, and incorporation in the welding process. Tensile shear force and nugget diameter are the most crucial outputs for evaluating the quality of a resistance spot-welded specimen.
View Article and Find Full Text PDFResearch on the Influence of Liquid Metal Embrittlement Cracks on the Strength and Fatigue Life of Spot-Welded Joints of Galvanized Q&P980 Steel.
Materials (Basel)
December 2024
Materials Bigdata and Applications Division, Materials Academy Jitri, Suzhou 215131, China.
Galvanized high-strength steel has emerged as a key focus in automotive lightweighting research. During resistance spot welding of galvanized steel, the phenomenon of liquid metal embrittlement (LME) can occur, which is characterized by the appearance of irregular cracks on the weld spot surface. However, the impact of LME cracks on the mechanical properties of joints remains unclear.
View Article and Find Full Text PDFSurface roughness and profile dataset of Ti6Al4V textured by laser ablation and spark erosion.
Data Brief
December 2024
Centro Universitário FEI, Avenida Humber de Alencar Castelo Branco, 3972, São Bernardo do Campo, 09850-901 São Paulo, Brazil.
The Ti6Al4V alloy is widely recognized for its extensive industrial applications, particularly in the aeronautics sector, due to its exceptional strength to-weight ratio and corrosion resistance. In this context, many industrial processes depend critically on surface area, topology, and roughness. A promising approach involves combining Ti6Al4V alloy with polymer composites, which offers significant potential for engineers to design parts that are not only high-performing but also environmentally friendly.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!