We study the use of cadmium telluride (CdTe) nanocrystal colloids as a solution-processable "ink" for large-grain CdTe absorber layers in solar cells. The resulting grain structure and solar cell performance depend on the initial nanocrystal size, shape, and crystal structure. We find that inks of predominantly wurtzite tetrapod-shaped nanocrystals with arms ∼5.6 nm in diameter exhibit better device performance compared to inks composed of smaller tetrapods, irregular faceted nanocrystals, or spherical zincblende nanocrystals despite the fact that the final sintered film has a zincblende crystal structure. Five different working device architectures were investigated. The indium tin oxide (ITO)/CdTe/zinc oxide structure leads to our best performing device architecture (with efficiency >11%) compared to others including two structures with a cadmium sulfide (CdS) n-type layer typically used in high efficiency sublimation-grown CdTe solar cells. Moreover, devices without CdS have improved response at short wavelengths.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/nn502442g | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Cloud/VPN-Based Remote Control of a Modular Production System Assisted by a Mobile Cyber-Physical Robotic System-Digital Twin Approach.
Sensors (Basel)
January 2025
Department of Automation, "Dunarea de Jos" University of Galati, 800008 Galati, Romania.
This paper deals with a "digital twin" (DT) approach for processing, reprocessing, and scrapping (P/R/S) technology running on a modular production system (MPS) assisted by a mobile cyber-physical robotic system (MCPRS). The main hardware architecture consists of four line-shaped workstations (WSs), a wheeled mobile robot (WMR) equipped with a robotic manipulator (RM) and a mobile visual servoing system (MVSS) mounted on the end effector. The system architecture integrates a hierarchical control system where each of the four WSs, in the MPS, is controlled by a Programable Logic Controller (PLC), all connected via Profibus DP to a central PLC.
View Article and Find Full Text PDFField-Programmable Gate Array (FPGA)-Based Lock-In Amplifier System with Signal Enhancement: A Comprehensive Review on the Design for Advanced Measurement Applications.
Sensors (Basel)
January 2025
Facultad de Ingeniería, Universidad Autónoma de Baja California, Mexicali 21280, Mexico.
Lock-in amplifiers (LIAs) are critical tools in precision measurement, particularly for applications involving weak signals obscured by noise. Advances in signal processing algorithms and hardware synthesis have enabled accurate signal extraction, even in extremely noisy environments, making LIAs indispensable in sensor applications for healthcare, industry, and other services. For instance, the electrical impedance measurement of the human body, organs, tissues, and cells, known as bioelectrical impedance, is commonly used in biomedical and healthcare applications because it is non-invasive and relatively inexpensive.
View Article and Find Full Text PDFInnovative Driver Monitoring Systems and On-Board-Vehicle Devices in a Smart-Road Scenario Based on the Internet of Vehicle Paradigm: A Literature and Commercial Solutions Overview.
Sensors (Basel)
January 2025
Department of Innovation Engineering, University of Salento, 73100 Lecce, Italy.
In recent years, the growing number of vehicles on the road have exacerbated issues related to safety and traffic congestion. However, the advent of the Internet of Vehicles (IoV) holds the potential to transform mobility, enhance traffic management and safety, and create smarter, more interconnected road networks. This paper addresses key road safety concerns, focusing on driver condition detection, vehicle monitoring, and traffic and road management.
View Article and Find Full Text PDFDevelopment of Robust MWCNT Hydrogel Electrochemical Biosensor for Pyocyanin Detection by Phosphotungstic Acid Modification.
Sensors (Basel)
January 2025
Microbiology Institute of Shaanxi, No.76 Xiying Road, Xi'an 710043, China.
The trace detection of pyocyanin (PCN) is crucial for infection control, and electrochemical sensing technology holds strong potential for application in this field. A pivotal challenge in utilizing carbon materials within electrochemical sensors lies in constructing carbon-based films with robust adhesion. To address this issue, a novel composite hydrogel consisting of multi-walled carbon nanotubes/polyvinyl alcohol/phosphotungstic acid (MWCNTs/PVA/PTA) was proposed in this study, resulting in the preparation of a highly sensitive and stable PCN electrochemical sensor.
View Article and Find Full Text PDFRWA-BFT: Reputation-Weighted Asynchronous BFT for Large-Scale IoT.
Sensors (Basel)
January 2025
School of Artificial Intelligence, Beijing University of Posts and Telecommunications, Beijing 100876, China.
This paper introduces RWA-BFT, a reputation-weighted asynchronous Byzantine Fault Tolerance (BFT) consensus algorithm designed to address the scalability and performance challenges of blockchain systems in large-scale IoT scenarios. Traditional centralized IoT architectures often face issues such as single points of failure and insufficient reliability, while blockchain, with its decentralized and tamper-resistant properties, offers a promising solution. However, existing blockchain consensus mechanisms struggle to meet the high throughput, low latency, and scalability demands of IoT applications.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!