Ordered mesoporous carbon (CMK-3) was synthesized and functionalized with 2-amino-5-mercapto-1,3,4-thiadiazole groups (AMT-OCMK-3) for Hg(II) removal from aqueous solution. The modified CMK-3 was characterized by X-ray diffraction, N2 adsorption-desorption isotherm, scanning electron microscopy and Fourier transform infrared spectroscopy. The effects of solution pH, contact time, initial Hg(II) concentration and matrix effect were studied. The adsorption data were successfully fitted with the Langmuir model, exhibiting high adsorption capacity of 450.45 mg/g of AMT-OCMK-3. In the solid-phase extraction system a series of experimental parameters such as sample flow rate, sample volume, eluent volume and concentration of the eluent solution have been investigated and established for preconcentration of Hg(II) in aqueous solution. The results showed that the enrichment factor for Hg(II) was 250, the precision (relative standard deviation (RSD), %) for six replicate measurements was 2.05% and the limit of detection for Hg(II) was achieved at 0.17 μg/L.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jes.2014.05.021 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Role of Mesoporosity in Hard Carbon Anodes for High-Energy and Stable Potassium-Ion Storage.
Small
January 2025
Department of Material Science Engineering, Gachon University, Seongnamdaero 1342, Seongnam, 13120, Republic of Korea.
Herein, NaCl-templated mesoporous hard carbons (NMCs) have been designed and engineered with tunable surface properties as anode materials for potassium-ion batteries (KIBs) and hybrid capacitors (KICs). By utilizing "water-in-oil" emulsions, the size of NaCl templates is precisely modified, leading to smaller particles that enable the formation of primary carbon structures with reduced particle size and secondary structures with 3D interconnected mesoporosity. These features significantly enhance electrode density, reduce particle-to-particle resistance, and improve electrolyte wettability.
View Article and Find Full Text PDFDisentangling activity-stability trade-off in the catalytic degradation of malodorous sulfur-containing VOCs driven by active sites' self-dynamic evolution.
J Hazard Mater
December 2024
Faculty of Environmental Science and Engineering, Kunming University of Science and Technology, Kunming 650050, PR China; Faculty of Chemical Engineering, Kunming University of Science and Technology, Kunming 650500, PR China; Key Laboratory of Yunnan Province for Synthesizing Sulfur-containing Fine Chemicals, The Innovation Team for Volatile Organic Compounds Pollutants Control and Resource Utilization of Yunnan Province, The Higher Educational Key Laboratory for Odorous Volatile Organic Compounds Pollutants Control of Yunnan Province, Kunming 650500, PR China. Electronic address:
The catalytic degradation of malodorous sulfur-containing volatile organic compounds (S-VOCs), especially methanethiol (CHSH), faces an enormous challenge in striking a balance between activity and stability. Herein, we develop the time-tandem and spatial-extended strategy for synthesizing t-MoO/meso-SiO nano-reactor-type catalysts and reveal the migration and transformation behaviors of both carbon and sulfur species at the mesoscopic scale to break the catalytic CHSH activity and stability trade-off. The dynamic evolution of active centers from initial oxygen sites and acid sites to sulfur vacancies in MoS during the reaction process as well as the formation of a new dimethyl disulfide (CHSSCH) reaction pathway are identified as the main reason for the catalysts' superior activity and sulfur resistance.
View Article and Find Full Text PDFConstruction of MOF-derived Vanadium Nitride Decorated Micro/mesoporous Carbon Nanofibers for Aqueous Zinc-Ion Batteries.
Chemistry
January 2025
Westlake University, School of Engineering, 18 Shilongshan Road, 310024, Hangzhou, CHINA.
Design and manufacture of cathode materials, with suitable pore structure and high electrical conductivity to matching zinc anode, solving the problem of dissolution and structural degradation of cathode materials for zinc ion batteries (ZIBs), is great significance to the development of ZIBs. Herein, Vanadium Nitride (VN) uniformly decorated N-doped micro/mesoporous carbon nanofibers (VN/N-MCNF) with appropriate porous and reactive sites for Zn2+ is prepared by using V-MOF, as important precursor via electrostatic spinning and pyrolysis technique. As a cathode electrode for ZIBs, the VN/N-MCNF is suitable for diffusion and adsorption of large-sized solvated structured [Zn(H2O)6]2+, for its abundant micro/mesoporous structure and good electrical conductivity.
View Article and Find Full Text PDFFabrication and Performance Regulation of Lightweight Porous Electromagnetic Absorbing Materials via CO Nucleation-Free Foaming of EP.
Polymers (Basel)
December 2024
School of Materials Science and Engineering, Nanjing Institute of Technology, Nanjing 211167, China.
In this study, CO reacted with a curing agent through nucleophilic addition to form ammonium salts, enabling the stable capture and internal release of CO, which achieved gas-phase nucleation and foaming. Additionally, the introduction of wave-absorbing agents improved the absorption mechanism and promoted uniform foaming. This nucleation-free foaming process relies on the induced growth of gas nuclei and the synergistic effect of the wave-absorbing agents, effectively preventing the uneven foaming issues caused by traditional nucleating agents.
View Article and Find Full Text PDFEffects of the Hot-Drawing Process on the Pore Parameters, Gas Absorption and Mechanical Performances of Activated Carbon-Loaded Porous Poly(m-Phenylene Isophthalamide) Composite Fibres.
Polymers (Basel)
December 2024
College of Polymer Science & Engineering, Sichuan University, Chengdu 610065, China.
Poor breathability, inadequate flexibility, bulky wearability, and insufficient gas-adsorption capacity always limit the developments and applications of conventional chemical protective clothing (CPC). To create a lightweight, breathable, and flexible fabric with a high gas-absorption capacity, activated carbon (AC)-loaded poly(m-phenylene isophthalamide) (PMIA) porous composite fibres were fabricated from a mixed wet-spinning process integrated with a solvent-free phase separation process. By manipulating the pore parameters of as-spun composite fibres, the exposure-immobilization of AC particles on the fibre surface can offer a higher gas-absorption capacity and better AC-loading stability.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!