We studied the effects of high-pressure annealing (HPA) on InGaZnO (IGZO) thin-film transistors (TFTs). HPA was proceeded after TFT fabrication as a post process to improve electrical performance and stability. We used N2 as the pressurized gas. The applied pressures were 1 and 3 MPa at 200 °C. For N2 HPA under 3 MPa at 200 °C, field-effect mobility and the threshold voltage shift under a positive bias temperature stress were improved by 3.31 to 8.82 cm(2)/(V s) and 8.90 to 4.50 V, respectively. The improved electrical performance and stability were due to structural relaxation by HPA, which leads to increased carrier concentration and decreased oxygen vacancy.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/am502571w | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Signatures of ambient pressure superconductivity in thin film LaNiO.
Nature
December 2024
Stanford Institute for Materials and Energy Sciences, SLAC National Accelerator Laboratory, Menlo Park, CA, USA.
Recently, the bilayer nickelate LaNiO has been discovered as a new superconductor with transition temperature T near 80 K under high pressure. Despite extensive theoretical and experimental work to understand the nature of its superconductivity, the requirement of extreme pressure restricts the use of many experimental probes and limits its application potential. Here, we present signatures of superconductivity in LaNiO thin films at ambient pressure, facilitated by the application of epitaxial compressive strain.
View Article and Find Full Text PDFEffects of Short-Term Annealing on the Thermal Stability and Microstructural Evolution of Oxygen-Free Copper Processed by High-Pressure Torsion.
Materials (Basel)
December 2024
Department of Design and Engineering, Faculty of Science and Technology, Bournemouth University, Poole, Dorset BH12 5BB, UK.
This study explores the impact of short-term annealing on the thermal stability and mechanical properties of oxygen-free copper subjected to high-pressure torsion (HPT). Copper samples were deformed through HPT with varying numbers of turns at room temperature and subsequently subjected to short-term annealing at temperatures of 398 K and 423 K. Microstructural analysis revealed that annealing led to grain growth and a reduction in dislocation density, with samples processed with fewer HPT turns exhibiting more significant grain coarsening.
View Article and Find Full Text PDFB-Site-Ordered and Disordered Structures in A-Site-Ordered Quadruple Perovskites RMnNiMnO with R = Nd, Sm, Gd, and Dy.
Molecules
November 2024
Research Center for Materials Nanoarchitectonics (MANA), National Institute for Materials Science (NIMS), Namiki 1-1, Tsukuba 305-0044, Ibaraki, Japan.
ABO perovskite materials with small cations at the A site, especially with ordered cation arrangements, have attracted a lot of interest because they show unusual physical properties and deviations from general perovskite tendencies. In this work, A-site-ordered quadruple perovskites, RMnNiMnO with R = Nd, Sm, Gd, and Dy, were synthesized by a high-pressure, high-temperature method at about 6 GPa. Annealing at about 1500 K produced samples with additional (partial) B-site ordering of Ni and Mn cations, crystallizing in space group -3.
View Article and Find Full Text PDFMechanochromic Organic Micro-Laser.
Angew Chem Int Ed Engl
November 2024
State Key Laboratory of Applied Organic Chemistry (SKLAOC), Key Laboratory of Special Function Materials and Structure Design (MOE), College of Chemistry and Chemical Engineering, Lanzhou University, Lanzhou, 730000, P. R. China.
This work presents the first demonstration of a mechanochromic organic micro-laser, which exhibits remarkable wide range pressure sensing characteristics. The gain material, pinacolato boronate ester functionalized anthanthrene (AnBPin), is designed by incorporating mechanofluorochromic (MFC) properties into organic laser dye. The AnBPin exhibits a reversible transition between green and orange fluorescence upon grinding annealing and recrystallization cycle, and its micro-crystal exhibits typical organic micro-laser behaviors.
View Article and Find Full Text PDFTransparent (Ni,Au)/ZnO:Al-Based Ohmic Contacts to p-Type GaN as an Insight into the Role of Ni and Au in Standard p-Type GaN Contacts.
ACS Appl Mater Interfaces
November 2024
Łukasiewicz Research Network, Institute of Microelectronics and Photonics, Warsaw 02-668, Poland.
In this work, Ni/ZnO:Al and Au/ZnO:Al structures are proposed as efficient ohmic contacts to p-GaN. Through a careful selection of deposition parameters and annealing environment, we not only achieve the formation of high-quality ohmic contacts but also gain insights into the interfacial reactions, enhancing the understanding of conventional Ni/Au contact formation on p-GaN. In particular, the notion that the presence of NiO at the interface is enough for an ohmic contact to form is challenged by showing that in fact it has to be NiO formed at the interface from metallic Ni and additional oxygen.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!