Inserting metal thin layer into organic electroluminescent device often brings some unexpected effect. By inserting 5 nm Au thin layer between MoO3 and TPD, we prepared the OLED device with the structure of ITO/MoO3(5 nm)/Au(5 nm)/ TPD/AlQ/LiF/Al. The luminous efficiency is improved as compared to the device without the Au. By analysis, we believe that the Au between MoO3 and TPD formed a small trap for hole to reduce the current density in device. At the same time, since the light transmittance of green light (AlQ) of 5 nm Au is greater than 80%, the brightness of the device was not significantly affected. That is the reasons for the improved luminous efficiency. This work provides some new ideas and experimental evidence for how to improve the luminous efficiency of OLED devices.
Download full-text PDF |
Source |
|---|
Publication Analysis
Top Keywords
Similar Publications
Highly Efficient Blue Light-Emitting Diodes Enabled by Gradient Core/Shell-Structured Perovskite Quantum Dots.
ACS Nano
January 2025
MIIT Key Laboratory of Advanced Display Materials and Devices, Jiangsu Province Engineering Research Center of Quantum Dot Display, School of Materials Science and Engineering, Institute of Optoelectronics & Nanomaterials, Nanjing University of Science and Technology, Nanjing, Jiangsu 210094, China.
Room temperature (RT) synthesized mixed bromine and chlorine CsPbBrCl perovskite quantum dots (Pe-QDs) offer notable advantages for blue quantum dot light-emitting diodes (QLEDs), such as cost-effective processing and narrow luminescence peaks. However, the efficiency of blue QLEDs using these RT-synthesized QDs has been limited by inferior crystallinity and deep defect presence. In this study, we demonstrate a precise approach to constructing high-quality gradient core-shell (CS) structures of CsPbBrCl QD through anion exchange.
View Article and Find Full Text PDFOne-Shot Synthesis of Sym- and Asym-Expanded Heterohelicene Isomers Exhibiting Narrowband Deep-Blue Fluorescence.
Angew Chem Int Ed Engl
January 2025
Tsinghua University, Chemistry, HeTian Building Dept. of Chemistry, Tsinghua University, Beijing, P. R. China, 100084, Beijing, CHINA.
Expanded heterohelicene composing of alternating linearly and angularly fused multi-resonance (MR) skeleton has garnered wide interest for their promising narrowband emission. Herein, a pair of sym- and asym-expanded heterohelicene isomers are firstly developed by merging boron/oxygen (B/O)-embedded MR triangulene and indolo[3,2,1-jk]carbazole units via one-shot synthesis. Owing to the fully resonating extended helical skeleton, the target heterohelicenes exhibit significantly narrowed spectra bandwidth while emission red-shifting, thus affording deep-blue narrowband emission with peak at around 460 nm, full-width-at-half-maximum (FWHM) of merely 18 nm and near-unity photoluminescence quantum yields.
View Article and Find Full Text PDFSelf-Assembled Monolayer-Functionalized NiO Hole Injection layer for Improved Charge Injection in Quantum Dot Light-Emitting Diodes.
ACS Appl Mater Interfaces
January 2025
School of Materials Science and Engineering, Kyungpook National University, Daegu 41566, Republic of Korea.
The development of quantum dot light-emitting diodes (QLEDs) represents a promising advancement in next-generation display technology. However, there are challenges, especially in achieving efficient hole injection, maintaining charge balance, and replacing low-stability organic materials such as PEDOT:PSS. To address these issues, in this study, self-assembled monolayers (SAMs) were employed to modify the surface properties of NiO, a hole injection material, within the structure of ITO/HIL/TFB/QDs/ZnMgO/Al QLEDs.
View Article and Find Full Text PDFLeveraging an Innovative Green Copper and Nitrogen-Doped Carbon Quantum Dots for Quantification of Malathion in Various Matrices.
J Fluoresc
January 2025
Pharmaceutical Analytical Chemistry Department, Faculty of Pharmacy, Al-Azhar University, Assiut branch, Assiut, 71524, Egypt.
Article Synopsis
- Carbon quantum dots (CQDs) are gaining attention as cost-effective and eco-friendly fluorescence probes, offering advantages over traditional luminescent techniques.
- A new type of copper and nitrogen-doped CQDs (Cu-N@CQDs) was created, achieving a high quantum yield of 40.20% for detecting malathion, an insecticide.
- The study demonstrated that the fluorescence intensity of Cu-N@CQDs decreased in response to malathion, allowing for accurate measurements across various samples like water and food, achieving high recovery rates.
Novel approach for quality control testing of medical displays using deep learning technology.
Biomed Phys Eng Express
January 2025
Gunma Prefectural College of Health Sciences, 323-1, Kamioki-machi, Maebashi, Gunma, Japan, Maebashi, Gunma, 371-0052, JAPAN.
In digital image diagnosis using medical displays, it is crucial to rigorously manage display devices to ensure appropriate image quality and diagnostic safety. The aim of this study was to develop a model for the efficient quality control (QC) of medical displays, specifically addressing the measurement items of contrast response and maximum luminance as part of constancy testing, and to evaluate its performance. In addition, the study focused on whether these tasks could be addressed using a multitasking strategy.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!