Electrochemical oxidation of tannery effluent was carried out in batch, batch recirculation and continuous reactor configurations under different conditions using a battery-integrated DC-DC converter and solar PV power supply. The effect of current density, electrolysis time and fluid flow rate on chemical oxygen demand (COD) removal and energy consumption has been evaluated. The results of batch reactor show that a COD reduction of 80.85% to 96.67% could be obtained. The results showed that after 7 h of operation at a current density of 2.5 A dm(-2) and flow rate of 100 L h(-1) in batch recirculation reactor, the removal of COD is 82.14% and the specific energy consumption was found to be 5.871 kWh (kg COD)(-1) for tannery effluent. In addition, the performance of single pass flow reactors (single and multiple reactors) system of various configurations are analyzed.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1080/10934529.2014.897524 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Characterization and application of polysaccharides produced by Pseudomonas atacamensis M7D1 for chromium (III) removal from tannery effluent.
Int J Biol Macromol
January 2025
Biotechnology Group, Chemical Engineering Department, Tarbiat Modares University, Tehran, Iran; Modares Environmental Research Institute, Tarbiat Modares University, Tehran, Iran. Electronic address:
The wastewater from various industries contaminated with heavy metals poses significant environmental challenges. Biosorption has emerged as a widely used method for removing heavy metals from industrial wastewater. Pseudomonas atacamensis M7D1 is known to produce polysaccharides, but the potential of its polysaccharides as an adsorbent for heavy metal removal still needs to be explored.
View Article and Find Full Text PDFBioaccumulation of Cr by the Species and L. Grown with and Without Compost in a Sandy Soil Contaminated by Leather Industrial Effluents.
Plants (Basel)
December 2024
Laboratorio de Ciencia de los Materiales, Facultad de Ciencias e Ingenierías Físicas y Formales, Universidad Católica de Santa María, Samuel Velarde 320, Arequipa 04000, Peru.
This research aimed to assess the bioaccumulation capacity of the species and L. using organic amendments to the phytoremediation of total chromium in the mid-zone of the Añashuayco Ravine, Uchumayo, Arequipa, impacted by tanneries from the Rio Seco Industrial Park. Additionally, it analyzed total chromium concentrations, soil physicochemical properties, and morphological changes in plants with and without organic matter.
View Article and Find Full Text PDFBiosorbent silver nanoparticles decorated coffee-ground waste composite for cleaning water and antimicrobial applications.
Environ Sci Pollut Res Int
January 2025
Department of Physics, Faculty of Science, King Abdulaziz University, 21589, Jeddah, Saudi Arabia.
A sustainable biosorbent, silver nanoparticles-decorated coffee-ground waste (CWAg), was synthesized through a simple in-situ reduction method. CWAg is extensively characterized via SEM-EDX, PZC, FTIR, XRD, HR-TEM, and XPS analyses. The biosorbent was tested to remove chromium (Cr(VI)) and methylene blue (MB) from wastewater, and its antibacterial properties was evaluated.
View Article and Find Full Text PDFApplication of zeolites for efficient tannery wastewater remediation.
Environ Sci Pollut Res Int
January 2025
Stazione Sperimentale Per L'industria Delle Pelli E Delle Materie Concianti S.R.L., 80143, Napoli, Italy.
Leather manufacturing is the process of converting raw animal hides or skins into finished leather. The complex industrial procedures result in a tanning effluent composed of chemical compounds with potentially hazardous impacts on humans and ecosystems. Among the traditional and efficient wastewater treatments, adsorption is an effective and well-known approach, able to manage a wide range of contaminants from wastewater.
View Article and Find Full Text PDFAdsorption of Cr(VI) Using Organoclay/Alginate Hydrogel Beads and Their Application to Tannery Effluent.
Gels
November 2024
Departamento de Ingeniería Química, Universidad Nacional de Colombia Sede Manizales, Campus La Nubia, km 9 vía al Aeropuerto, Manizales 170003, Colombia.
The tanning industry is among the most environmentally harmful activities globally due to the pollution of lakes and rivers from its effluents. Hexavalent chromium, a metal in tannery effluents, has adverse effects on human health and ecosystems, requiring the development of removal techniques. This study assessed the efficacy of organobentonite/alginate hydrogel beads in removing Cr(VI) from a fixed-bed adsorption column system.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!