On the effectiveness of lateral excitation of shear modes in AlN layered resonators.

Ultrasonics

GMME-CEMDATIC, ETSI Telecomunicación, Universidad Politécnica de Madrid, Madrid, Spain.

Published: August 2014

We describe the fabrication and frequency characterization of different structures intended for the lateral excitation of shear modes in AlN c-axis-oriented films. AlN films are deposited on moderately doped silicon substrates covered either with partially metallic or fully insulating Bragg mirrors, and on insulating glass plates covered with insulating acoustic reflectors. TiOx seed layers are used to promote the growth of highly c-axis oriented AlN films, which is confirmed by XRD and SAW measurements. The excitation of the resonant modes is achieved through coplanar Mo electrodes of different geometries defined on top of the AlN films. All the structures analyzed display a clear longitudinal mode travelling at 11,000 m/s, whose excitation is attributed to the direction of the electric field (parallel to the c-axis) below the electrodes; this is enhanced when a conductive plane (metallic layer or Si substrate) is present under the piezoelectric layer. Conversely, only a weak shear resonance (6,350 m/s) is stimulated through the effect of coplanar electrodes, which is explained by the weakness of the electric field strength parallel to the surface between the electrodes. A significantly more effective excitation of shear modes can be achieved by normal excitation of AlN films with tilted c-axis.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.ultras.2014.04.014DOI Listing

Publication Analysis

Top Keywords

aln films
16
excitation shear
12
shear modes
12
lateral excitation
8
modes aln
8
modes achieved
8
coplanar electrodes
8
electric field
8
excitation
6
aln
6

Similar Publications

Bulk Acoustic Wave (BAW) filters find applications in radio frequency (RF) communication systems for Wi-Fi, 3G, 4G, and 5G networks. In the beyond-5G (potential 6G) era, high-frequency bands (>8 GHz) are expected to require resonators with high-quality factor (Q) and electromechanical coupling ( ) to form filters with low insertion loss and high selectivity. However, both the Q and of resonator devices formed in traditional uniform polarization piezoelectric films of aluminum nitride (AlN) and aluminum scandium nitride (AlScN) decrease when scaled beyond 8 GHz.

View Article and Find Full Text PDF

Aluminum nitride (AlN) with a wide band gap (approximately 6.2 eV) has attractive characteristics, including high thermal conductivity, a high dielectric constant, and good insulating properties, which are suitable for the field of resistive random access memory. AlN thin films were deposited on ITO substrate using the radio-frequency magnetron sputtering technique.

View Article and Find Full Text PDF

Black aluminum is a material characterized by high surface porosity due to columnar growth and exhibits unique optical properties that make it attractive for applications such as light trapping, infrared detection, and passive thermal radiation cooling. In this study, we correlate the structural and optical properties of black aluminum by comparing it with conventional reflective aluminum layers. These layers of varying thicknesses were deposited on fused silica substrates, and their optical properties were analyzed.

View Article and Find Full Text PDF

This work presents air-coupled piezoelectric micromachined ultrasonic transducers (pMUTs) with high sound pressure level (SPL) under low-driving voltages by utilizing sputtered potassium sodium niobate KNaNbO (KNN) films. A prototype single KNN pMUT has been tested to show a resonant frequency at 106.3 kHz under 4 V with outstanding characteristics: (1) a large vibration amplitude of 3.

View Article and Find Full Text PDF

Thermal Characterization of Ferroelectric AlBN for Nonvolatile Memory.

ACS Appl Mater Interfaces

December 2024

Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802, United States.

Boron (B)-substituted wurtzite AlN (AlBN) is a recently discovered wurtzite ferroelectric material that offers several advantages over ferroelectric HfZrO and PbZrTiO. Such benefits include a relatively low growth temperature as well as a thermally stable, and thickness-stable ferroelectric polarization; these factors are promising for the development of ferroelectric nonvolatile random-access memory (FeRAM) that are CMOS-compatible, scalable, and reliable for storing data in harsh environments. However, wurtzite ferroelectric materials may undergo exacerbated self-heating upon polarization switching relative to other ferroelectric materials; the larger energy loss is anticipated due to the higher coercive field and remanent polarization.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!