Purpose: Intraoperative fluoroscopy has been proposed as a feasible method to improve the accuracy of anatomical tunnel positioning. However, it has so far not been determined, whether this technique reduces the variability of tunnel positioning in a clinical set-up. Therefore, the purpose of this study was to determine the variability of tunnel positions applying intraoperative fluoroscopy.
Methods: Femoral and tibial tunnel positions of 112 fluoroscopic ACL reconstruction cases were determined according to validated radiological measurement methods. Mean positions, standard deviations and ranges were calculated to determine the variability of the tunnel positions. Subgroup variability analysis was performed to analyse cases in which tunnel positions were corrected.
Results: Applying intraoperative fluoroscopy, the variability of tunnel positions was found to be 3 % at the femur (range 15.4 %) and 2.3 % at the tibia (9.7 %). In 34 cases (30.0 %), non-satisfactory tunnel positions were identified and could be corrected achieving more accurate positions regarding to radiological parameters (14× femur, 16× tibia, 4× femur and tibia).
Conclusions: The results of the presented study indicate that intraoperative fluoroscopy allows to identify non-accurate tunnel positions regarding to radiological criteria. The determined low variability indicates that fluoroscopic-based ACL reconstruction can be recommended as a feasible, easy and effective adjunct that enables surgeons to create more consistent and reliable tunnel positions in ACL reconstruction.
Level Of Evidence: IV.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1007/s00167-014-3029-y | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Purpose: To clarify the femoral tunnel location for a virtual anterior cruciate ligament (ACL) graft to simulate the native ACL.
Methods: Three-dimensional (3D) computed tomography (CT) and magnetic resonance imaging (MRI) were obtained in 14 normal knees in full extension. Two types of virtual triple bundle ACL grafts (VACLG) were created.
Real-Time Subcutaneous Arterial Navigation for Thinning of an Anterolateral Thigh Flap Using Photoacoustic Imaging and Projection Mapping: A Case Report.
Microsurgery
January 2025
Department of Plastic and Reconstructive Surgery, Graduate School of Medicine, Kyoto University, Kyoto, Japan.
Thinning of anterolateral thigh flap is challenging. Anatomical studies have shown variations in arterial branching patterns in the subcutaneous layer, which were suspected to be the reason for the high frequency of thinning failures. We attempted to visualize subcutaneous arterial courses preoperatively and perform thinning of perforator flaps using this information appropriately.
View Article and Find Full Text PDFThe Effects of Inaccurate Femoral Tunnel Placement During Medial Patellofemoral Ligament Reconstruction on Midterm Clinical Outcomes in Treatment of Recurrent Patellar Dislocation.
Am J Sports Med
January 2025
Department of Sports Medicine, Peking University Third Hospital; Institute of Sports Medicine of Peking University; Beijing Key Laboratory of Sports Injuries, Beijing, China.
Background: There is a lack of evidence and continuous debate on whether femoral tunnel displacement substantially influences the clinical efficacy of medial patellofemoral ligament reconstruction (MPFL-R) in addressing recurrent patellar dislocation.
Purpose: To investigate possible associations between inaccurate femoral tunnel placement during MPFL-R and clinical outcomes, with a specific focus on proximal tunnel malpositioning.
Study Design: Cohort study; Level of evidence, 3.
Forehead Lift With Cross-Frontal Scalp Anchorage.
Aesthet Surg J
January 2025
Plastic sugeon in private practice, Istanbul, Turkey.
Background: Over the past decade, facial aesthetics has gained popularity, with a notable increase in upper-face lift procedures. Despite the popularity of brows and forehead lifts, the optimal fixation technique remains controversial. Common methods involve suturing of the temporal fascia or using monocortical miniscrews anchored to the frontal bone.
View Article and Find Full Text PDFProcess analysis and multi-parameter optimization of 5052 aluminum alloy FSW based on thermo-mechanical coupling and Taguchi method.
Sci Rep
January 2025
Beijing Solidwel Intelligent Technology Co., Ltd., BeiJing, 100000, China.
Based on the Johnson-Cook constitutive model and modified Coulomb's law, the study investigates the impact of various process parameters on the weld temperature field in high-strength 5052 aluminum alloy friction stir welding (FSW) for aerospace applications. Utilizing a thermo-mechanical model, the significance of rotational speed, welding speed, and indentation on the peak weld temperature is examined through Taguchi's orthogonal experimental design. S/N ratio and ANOVA results show that the rotational speed has the most significant effect on the peak temperature of the weld, followed by the amount of indentation, and the welding speed has the smallest effect, the optimal combination of welding process parameters is determined as follows:the rotational speed is 1000 rpm, the amount of indentation is 0.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!