Impact of non-storing biomass on PHA production: an enrichment culture on acetate and methanol.

Int J Biol Macromol

Department of Biotechnology, Delft University of Technology, Julianalaan 67, 2628 BC Delft, The Netherlands. Electronic address:

Published: November 2014

The use of enrichment cultures for polyhydroxyalkanoate (PHA) production from substrate mixtures such as wastewater inevitably results in the establishment of a non-PHA-storing population besides the PHA-producing bacteria. This reduces the maximum PHA content that can be established, and increases downstream-processing costs. The aim of this study was to investigate the impact of non-storing biomass on the PHA production process. A microbial culture was enriched in a sequencing batch reactor fed with acetate and methanol. Methanol served as model substrate for compounds unsuitable for PHA production. The enrichment was dominated by Plasticicumulans acidivorans, a known PHA producer, and Methylobacillus flagellatus, an obligate methylotroph that cannot store PHA. As expected, the presence of the non-storing population lowered the maximum PHA content of the culture, from more than 80 to 66wt.%. To mimic a nitrogen-rich waste stream, additional accumulation experiments were performed with continuous supply of carbon and ammonium. In these experiments P. acidivorans still accumulated large amounts of PHA, but unrestricted growth of the non-storing, methylotrophic population reduced the maximum overall PHA content to 52wt.%. Besides ammonium limitation, other strategies to restrict the fraction of non-storing biomass should be developed. The mixture of acetate and methanol is a useful model substrate for the development of such strategies.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.ijbiomac.2014.04.051DOI Listing

Publication Analysis

Top Keywords

pha production
16
non-storing biomass
12
acetate methanol
12
maximum pha
12
pha content
12
pha
10
impact non-storing
8
biomass pha
8
production enrichment
8
model substrate
8

Similar Publications

Demonstrating performance in scaled-up production and quality control of polyhydroxyalkanoates using municipal waste activated sludge.

Water Res

January 2025

Department of Biotechnology, Delft University of Technology, Delft, The Netherlands; Wetsus, European Centre of Excellence for Sustainable Water Technology, Leeuwarden, The Netherlands; School of Chemical Engineering, University of Queensland, St. Lucia, Australia. Electronic address:

Significant progress has been made over the past decade with pilot scale polyhydroxyalkanoate (PHA) production by direct accumulation using municipal waste activated sludge (WAS). However, industrial upscaling experiences are still lacking in the research literature. In this study, a demonstration scale (4 m) PHA production process was operated using industrially relevant equipment and compared favourably to those from parallel pilot scale (200 L) production runs.

View Article and Find Full Text PDF

Polyhydroxyalkanoates (PHA) are bioplastics produced by few bacteria as intracellular lipid inclusions under excess carbon source and nutrient-deprived conditions. These polymers are biodegradable and resemble petroleum-based plastics. The rising environmental concerns have increased the demand for PHA, but the low yield in wild-type bacterial strains limits large-scale production.

View Article and Find Full Text PDF

Enhanced production, functionalization, and applications of polyhydroxyalkanoates from organic waste: A review.

Int J Biol Macromol

January 2025

Department of Chemical and Environmental Engineering and Pro-Vice-Chancellor (Planning & Resources), University of Mauritius, Reduit, Mauritius.

Polyhydroxyalkanoates (PHAs) represent a promising class of biodegradable polyesters synthesized by various microorganisms as energy storage compounds. Their versatility and environmental friendliness make them potential candidates for replacing conventional plastics across numerous applications. However, challenges such as limited mechanical properties, high production costs, and thermal instability have hindered their widespread adoption.

View Article and Find Full Text PDF

The products of an advanced sewage sludge fermentation process can be used to generate polyhydroxyalkanoates (PHAs), precursors of bioplastics considered excellent candidates for replacing petroleum-derived plastics. The aerobic feast-anoxic famine cycling strategy has proven to be an efficient method for enriching sewage sludge microbiota with PHA-producing microorganisms. This work evaluated the effect of different carbon to nitrogen ratios (C/N) of 3.

View Article and Find Full Text PDF

Introduction: The Quality by Design (QbD) approach for developing cell therapy products using mesenchymal stromal/stem cells (MSCs) is a promising method for designing manufacturing processes to improve the quality of MSC products. It is crucial to ensure the reproducibility and robustness of the test system for evaluating critical quality attributes (CQAs) in the QbD approach for manufacturing of pharmaceutical products. In this study, we explored the key factors involved in establishing a robust evaluation system for the immunosuppressive effect of MSCs, which can be an example of a CQA in developing and manufacturing therapeutic MSCs for treating graft-versus-host disease, , and we have identified method attributes to increase the robustness of a simple assay to assess the immunosuppressive effects of MSCs.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!