The aim of the present study was to prepare resorbable hydroxyapatite (HA) based bone graft materials reinforced with carbon nanotubes as a way to cope with the inability of pure HA to resorb and its intrinsic brittleness and poor strength that restrict its clinical applications under load-bearing conditions. With this purpose, a Si-doped HA nanopowder (n-Si0.8HA) was prepared by chemical synthesis and used as composite matrix reinforced with different amounts of functionalized multiwall carbon nanotubes (MWCNTs). The effect of the added amounts of MWCNTs on the mechanical properties of nanocomposites and their in vitro biomineralization was assessed by bending strength measurements, immersing tests in simulated body fluid solution (SBF), scanning electron microscopy (SEM), and inductively coupled plasma atomic emission spectroscopy analysis (ICP-AES). The bioactivity and bending strength were enhanced, reaching maximum balanced values for an optimum addition of 3 wt.% f-MWCNTs. These results might contribute to broaden the potential applications of HA-based bone grafts.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1166/jnn.2014.8075 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Strength and Poisson's ratio of fused filament fabrication parts made from carbon filler enhanced PEEK compounds at elevated temperatures.
Sci Rep
December 2024
School of Electrical Engineering, Aalto University, P.O. Box 15500, Aalto, FI-00076, Finland.
Engineering plastics are finding widespread applications across a broad temperature spectrum, with additive manufacturing (AM) having now become commonplace for producing aerospace-grade components from polymers. However, there is limited data available on the behavior of plastic AM parts exposed to elevated temperatures. This study focuses on investigating the tensile strength, tensile modulus and Poisson's ratio of parts manufactured using fused filament fabrication (FFF) and polyetheretherketone (PEEK) plastics doped with two additives: short carbon fibers (SCFs) and multi-wall carbon nanotubes (MWCNTs).
View Article and Find Full Text PDFFacile Preparation of Carbon Nanotube-Based Skin-Like Pressure Sensors.
Small
December 2024
Department of Chemistry & Chemical Biology and the Brockhouse Institute for Materials Research, McMaster University, 1280 Main St. W., Hamilton, ON, L8S 4M1, Canada.
Flexible sensors have garnered significant interest for their potential to monitor human activities and provide valuable feedback for healthcare purposes. Single-walled carbon nanotubes (SWNTs) are promising materials for these applications but suffer from issues of poor purity and solubility. Dispersing SWNTs with conjugated polymers (CPs) enhances solution processability, yet the polymer sidechains can insulate the SWNTs, limiting the sensor's operating voltage.
View Article and Find Full Text PDFResolving the Kinetics of Single-Walled Carbon Nanotube-Polyester Polyurethane Nanoparticle Conjugate Fluorescence Sensors toward Polymer Degrading Enzymes.
Nano Lett
December 2024
Department of Chemical and Biological Engineering, Iowa State University, Ames, Iowa 50011, United States.
Single-walled carbon nanotubes (SWCNTs) are fluorescent materials that have been developed as sensors for measuring the activities of enzymes. However, most sensors to date rely on end-point measurement and empirical functions to correlate enzyme concentrations with fluorescence responses. Less emphasis is put on analyzing time-dependent fluorescence responses and their connections with enzymatic kinetics.
View Article and Find Full Text PDFAntimicrobial Efficacy of Single-Walled Carbon Nanotubes and Their Combinations Against Enterococcus faecalis Assessed Using the Agar Diffusion Method: An In Vitro Study.
Cureus
November 2024
Department of Conservative Dentistry and Endodontics, SRM Kattankulathur Dental College, Chennai, IND.
Introduction: This study aimed to evaluate the antimicrobial efficacy of single-walled carbon nanotubes when combined with the commonly used intracanal medicaments by checking their zone of inhibition against .
Materials And Methods: The test materials were divided into five different groups, namely, Group I: single-walled carbon nanotubes; Group II: calcium hydroxide; Group III: chlorhexidine; Group IV: single-walled carbon nanotubes + calcium hydroxide; and Group V: single-walled carbon nanotubes + chlorhexidine. Five sterile Petri plates per group were inoculated with (); wells were made in the plates, one on each side, and a volume of 50 microliters of each solution was dispensed into individual wells using a pipette.
Comparative study of third harmonic generation in carbon and silicene nanotubes under magnetic fields.
Sci Rep
December 2024
Department of physics, Faculty of Science, Malayer University, Malayer, Iran.
This study investigates the optical properties of carbon nanotubes (CNTs) and silicene nanotubes (SiNTs) under the influence of external magnetic fields, focusing on their linear and nonlinear optical responses. A tight-binding model is employed to analyze the effects of magnetic fields on the electronic band structure, dipole matrix elements, and various optical susceptibilities of zigzag CNTs and SiNTs. The results reveal significant magnetic field-induced modifications in both linear and nonlinear optical spectra.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!