Biocompatibility evaluation of porous ceria foams for orthopedic tissue engineering.

J Biomed Mater Res A

Department of Materials Science and Engineering, University of Florida, Gainesville, Florida.

Published: January 2015

Ceria ceramics have the unique ability to protect cells from free radical-induced damage, making them materials of interest for biomedical applications. To expand upon the understanding of the potential of ceria as a biomaterial, porous ceria, fabricated via direct foaming, was investigated to assess its biocompatibility and its ability to scavenge free radicals. A mouse osteoblast (7F2) cell line was cultured with the ceria foams to determine the extent of the foams' toxicity. Toxicity assessments indicate that mouse osteoblasts cultured directly on the ceria scaffold for 72 h did not show a significant (p > 0.05) increase in toxicity, but rather show comparable toxicity to cells cultured on porous 45S5 Bioglass. The in vitro inflammatory response elicited from porous ceria foams was measured as a function of tumor necrosis factor alpha (TNF-α) secreted from a human monocytic leukemia cell line. Results indicate that the ceria foams do not cause a significant inflammatory response, eliciting a response of 27.1 ± 7.1 pg mL(-1) of TNF-α compared to 36.3 ± 5.8 pg mL(-1) from cells on Bioglass, and 20.1 ± 2.9 pg mL(-1) from untreated cells. Finally, we report cellular toxicity in response to free radicals from tert-butyl hydroperoxide with and without foamed ceria. Our preliminary results show that the foamed ceria is able to decrease the toxic effect of induced oxidative stress. Collectively, this study demonstrates that foamed ceria scaffolds do not activate an inflammatory response, and show potential free radical scavenging ability, thus they have promise as an orthopedic biomaterial.

Download full-text PDF

Source
http://dx.doi.org/10.1002/jbm.a.35137DOI Listing

Publication Analysis

Top Keywords

ceria foams
16
porous ceria
12
inflammatory response
12
foamed ceria
12
ceria
11
free radicals
8
toxicity
5
response
5
biocompatibility evaluation
4
porous
4

Similar Publications

Thermochemical Activity of Single- and Dual-Phase Oxide Compounds Based on Ceria, Ferrites, and Perovskites for Two-Step Synthetic Fuel Production.

Molecules

May 2023

Processes, Materials and Solar Energy Laboratory (PROMES-CNRS), 7 Rue du Four Solaire, 66120 Odeillo Font-Romeu, France.

This study focuses on the generation of solar thermochemical fuel (hydrogen, syngas) from CO and HO molecules via two-step thermochemical cycles involving intermediate oxygen-carrier redox materials. Different classes of redox-active compounds based on ferrite, fluorite, and perovskite oxide structures are investigated, including their synthesis and characterization associated with experimental performance assessment in two-step redox cycles. Their redox activity is investigated by focusing on their ability to perform the splitting of CO during thermochemical cycles while quantifying fuel yields, production rates, and performance stability.

View Article and Find Full Text PDF

Oxidation of Methanol and Dichloromethane on TiO-CeO-CuO, TiO-CeO and TiO-CuO@VUKOPORA Ceramic Foams.

Nanomaterials (Basel)

March 2023

Environmental and Chemical Engineering, Faculty of Technology, University of Oulu, P.O. Box 4300, FI-90014 Oulu, Finland.

The application-attractive form of TiO, CeO and CuO-based open-cell foam supported catalysts was designed to investigate their catalytic performance in oxidation of two model volatile organic compounds-methanol and dichloromethane. TiO-CeO, TiO-CuO and TiO-CeO-CuO catalysts as thin films were deposited on VUKOPORA ceramic foam using a reverse micelles-controlled sol-gel method, dip-coating and calcination. Three prepared catalytic foams were investigated via light-off tests in methanol and dichloromethane oxidation in the temperature range of 45-400 °C and 100-500 °C, respectively, at GHSV of 11, 600 h, which fits to semi-pilot/industrial conditions.

View Article and Find Full Text PDF

We report the first ever robocast (additive manufacturing/3D printing) sintered ceria scaffolds, and explore their use for the production of renewable fuels solar thermochemical fuel production (STFP, water and carbon dioxide splitting using concentrated solar energy). CeO catalyst scaffolds were fabricated as 50 mm diameter discs (struts and voids ∼500 μm), sintered at 1450 °C, with specific surface area of 1.58 m g.

View Article and Find Full Text PDF

A Review of Solar Thermochemical CO Splitting Using Ceria-Based Ceramics With Designed Morphologies and Microstructures.

Front Chem

September 2019

Renewable Energy and Energy System Integration Unit, LNEG-Laboratório Nacional de Energia e Geologia I.P., LEN-Laboratório de Energia, Lisbon, Portugal.

This review explores the advances in the synthesis of ceria materials with specific morphologies or porous macro- and microstructures for the solar-driven production of carbon monoxide (CO) from carbon dioxide (CO). As the demand for renewable energy and fuels continues to grow, there is a great deal of interest in solar thermochemical fuel production (STFP), with the use of concentrated solar light to power the splitting of carbon dioxide. This can be achieved in a two-step cycle, involving the reduction of CeO at high temperatures, followed by oxidation at lower temperatures with CO, splitting it to produce CO, driven by concentrated solar radiation obtained with concentrating solar technologies (CST) to provide the high reaction temperatures of typically up to 1,500°C.

View Article and Find Full Text PDF

Ceria ceramics have the unique ability to protect cells from free radical-induced damage, making them materials of interest for biomedical applications. To expand upon the understanding of the potential of ceria as a biomaterial, porous ceria, fabricated via direct foaming, was investigated to assess its biocompatibility and its ability to scavenge free radicals. A mouse osteoblast (7F2) cell line was cultured with the ceria foams to determine the extent of the foams' toxicity.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!