Two-dimensional imaging in a lightweight portable MRI scanner without gradient coils.

Magn Reson Med

A.A. Martinos Center for Biomedical Imaging, Department of Radiology, Massachusetts General Hospital, Charlestown, Massachusetts, USA; Department of Electrical Engineering and Computer Science, Massachusetts Institute of Technology, Cambridge, Massachusetts, USA.

Published: February 2015

Purpose: As the premiere modality for brain imaging, MRI could find wider applicability if lightweight, portable systems were available for siting in unconventional locations such as intensive care units, physician offices, surgical suites, ambulances, emergency rooms, sports facilities, or rural healthcare sites.

Methods: We construct and validate a truly portable (<100 kg) and silent proof-of-concept MRI scanner which replaces conventional gradient encoding with a rotating lightweight cryogen-free, low-field magnet. When rotated about the object, the inhomogeneous field pattern is used as a rotating spatial encoding magnetic field (rSEM) to create generalized projections which encode the iteratively reconstructed two-dimensional (2D) image. Multiple receive channels are used to disambiguate the nonbijective encoding field.

Results: The system is validated with experimental images of 2D test phantoms. Similar to other nonlinear field encoding schemes, the spatial resolution is position dependent with blurring in the center, but is shown to be likely sufficient for many medical applications.

Conclusion: The presented MRI scanner demonstrates the potential for portability by simultaneously relaxing the magnet homogeneity criteria and eliminating the gradient coil. This new architecture and encoding scheme shows convincing proof of concept images that are expected to be further improved with refinement of the calibration and methodology.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4257909PMC
http://dx.doi.org/10.1002/mrm.25147DOI Listing

Publication Analysis

Top Keywords

lightweight portable
8
two-dimensional imaging
4
imaging lightweight
4
portable mri
4
mri scanner
4
scanner gradient
4
gradient coils
4
coils purpose
4
purpose premiere
4
premiere modality
4

Similar Publications

The timely and accurate detection of brain tumors is crucial for effective medical intervention, especially in resource-constrained settings. This study proposes a lightweight and efficient RetinaNet variant tailored for medical edge device deployment. The model reduces computational overhead while maintaining high detection accuracy by replacing the computationally intensive ResNet backbone with MobileNet and leveraging depthwise separable convolutions.

View Article and Find Full Text PDF

Autonomous Self-Healing Magnetoelectric I-Skin from Self-Bonded Deep Eutectic Polymer.

Small Methods

January 2025

State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan, 430074, P. R. China.

Next-generation ionic skin (i-skin) should be self-healing and self-powered, promoting its development toward lightweight, miniaturization, compact, and portable designs. Previously reported self-powered i-skin mostly either lack the ability to self-repair damaged parts or only have self-healing capabilities some components, falling short of achieving complete device self-healability. In this work, a self-bonding strategy is presented to obtain an all-polymerizable deep eutectic solvent (PDES) magnetoelectric i-skin (MIS) that simultaneously achieves self-powering and full-device autonomous self-healability.

View Article and Find Full Text PDF

Wearable Fluidic Fabric with Excellent Heat Transfer Performance for Sports Recovery.

Adv Sci (Weinh)

January 2025

Research Institute for Intelligent Wearable Systems, School of Fashion and Textiles, The Hong Kong Polytechnic University, Kowloon, 999077, China.

Rapid temperature contrast hydrotherapy by water immersion has been utilized by athletes for effective sports recovery. However, its application at some training or competition venues is limited by high water consumption, bucky size, personal hygiene, and inconvenience. Here, a novel portable system equipped with highly effective, lightweight, and hygienic wearable fluidic fabric device is reported, that replaces direct water immersion.

View Article and Find Full Text PDF

A handheld biofluorometric system for acetone detection in exhaled breath condensates.

Analyst

January 2025

Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, 1-5-45 Yushima, Bunkyo-ku, Tokyo 113-8510, Japan.

As a marker of human metabolism, acetone is important for lipid metabolism monitoring and early detection of diabetes. In this study, we developed a handheld biosensor for acetone based on fluorescence detection by utilizing the enzymatic reaction of secondary alcohol dehydrogenase (S-ADH) with β-nicotinamide adenine dinucleotide (NADH, = 340 nm, = 490 nm). In the reaction, NADH is oxidized when acetone is reduced to 2-propanol by S-ADH, and the acetone concentration can be measured by detecting the amount of NADH consumed in this reaction.

View Article and Find Full Text PDF

Portable astronomical observation system based on large-aperture concentric-ring metalens.

Light Sci Appl

January 2025

Institute of Microstructure Technology (IMT), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtzplatz 1, Eggenstein-Leopoldshafen, 76344, Germany.

The core advantage of metalenses over traditional bulky lenses lies in their thin volume and lightweight. Nevertheless, as the application scenarios of metalenses extend to the macro-scale optical imaging field, a contradiction arises between the increasing demand for large-aperture metalenses and the synchronous rise in design and processing costs. In response to the application requirements of metalens with diameter reaching the order of 10λ or even 10λ, this paper proposes a novel design method for fixed-height concentric-ring metalenses, wherein, under the constraints of the processing technology, a subwavelength 2D building unit library is constructed based on different topological structures, and the overall cross-section of the metalens is assembled.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!