Ca3ZrSi2O9 (baghdadite) has become a major research focus within the biomaterial community due to its remarkable in-vitro and in-vivo bioactivity. Although baghdadite seems to exhibit interesting biological properties, as yet there has been no data published concerning its mechanical properties. This lack of knowledge hinders targeting this novel bioactive material towards potential applications. In this study we prepare dense Ca3ZrSi2O9 bulk ceramics for the first time, allowing the evaluation of its mechanical properties including hardness, bending strength, Young׳s modulus, and fracture toughness. The preparation of baghdadite has been accomplished by a direct solid-state synthesis in combination with conventional sintering at 1350-1450°C for 3h. Our results show that samples sintered at 1400°C exhibit the best mechanical properties, resulting in a bending strength, fracture toughness, and hardness of 98±16MPa, 1.3±0.1MPam(0.5), and 7.9±0.2GPa. With a comparable mechanical strength to hydroxyapatite, but with an increased fracture toughness by 30% and hardness by 13% baghdadite is highly suitable for potential applications in non-load bearing areas (e.g. coatings or filler materials).
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jmbbm.2014.02.021 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Foldable, Stretchable, Superelastic, and Tunable Wettability Aramid Nanofiber Aerogels for Efficient Thermal Insulation and Oil-Water Separation.
Langmuir
January 2025
School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China.
Aerogels hold great potential in thermal insulation, catalytic supports, adsorption, and separation, due to their low density, high porosity, and low thermal conductivity. However, their inherent mechanical fragility and limited control functionality pose substantial challenges that hinder their practical use. In this study, a strategy is developed for the fabrication of cross-linked aramid nanofiber aerogels (cANFAs) by combining internanofiber surface cross-linking with ice-templating techniques.
View Article and Find Full Text PDFData-Driven Discovery of High-Performance Heterobilayer Transition Metal Dichalcogenide-Based Sliding Ferroelectrics.
ACS Appl Mater Interfaces
January 2025
Department of Mechanical Engineering, National University of Singapore, Singapore 117575, Singapore.
The development of efficient sliding ferroelectric (FE) materials is crucial for advancing next-generation low-power nanodevices. Currently, most efforts focus on homobilayer two-dimensional materials, except for the experimentally reported heterobilayer sliding FE, MoS/WS. Here, we first screened 870 transition metal dichalcogenide (TMD) bilayer heterostructures derived from experimentally characterized monolayer TMDs and systematically investigated their sliding ferroelectric behavior across various stacking configurations using high-throughput calculations.
View Article and Find Full Text PDFMinimum 24-Month Outcomes of Minimally Invasive Paratenon Protection Repair vs Open Giftbox Repair of Ruptured Achilles Tendon.
Foot Ankle Int
January 2025
Department of Orthopaedic Surgery, Wuxi Ninth People's Hospital Affiliated to Soochow University, Wuxi, Jiangsu, China.
Background: The paratenon has been shown to promote Achilles tendon healing, but the evidence supporting the role of paratenon protection technique in Achilles tendon repair is sparse. We retrospectively assessed the results of a paratenon-sparing repair technique vs an open giftbox repair of Achilles tendon ruptures.
Methods: Patients with Achilles tendon rupture who underwent surgical treatment at our hospital between January 2015 and August 2021 were retrospectively reviewed.
Influences of multi-pass friction stir alloying on characterization of AZ91D alloy-based dual reinforcement bio-ceramic nano-composites.
J Appl Biomater Funct Mater
January 2025
MOE Key Lab for Liquid-Solid Structure Evolution and Materials Processing, Shandong University, Jinan, China.
In current study, microstructural, mechanical and corrosion behaviour were investigated with incorporation of dual reinforced AZ91D surface composites. This research was carried out for enhancement of the bio-degradability in biological environment. The surface composites were successfully fabricated by friction stir processing method with a rotation speed of 800 rpm, travel speed of 80 mm/min and 2.
View Article and Find Full Text PDFMeasurement and Analysis of Optical Transmission Characteristics of the Human Skull.
J Biophotonics
January 2025
Department of Emergency, State Key Laboratory of Complex Severe and Rare Diseases, Peking Union Medical College Hospital, Chinese Academy of Medical Science and Peking Union Medical College, Beijing, China.
The brain, as a vital part of central nervous system, receives approximately 25% of body's blood supply, making accurate monitoring of cerebral blood flow essential. While fNIRS is widely used for measuring brain physiology, complex tissue structure affects light intensity, spot size, and detection accuracy. Many studies rely on simulations with limited experimental validation.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!