A variety of lac resin samples obtained from artists' suppliers, industrial manufacturers, and museum collections were analysed using gas chromatography mass spectrometry (GCMS) and reactive pyrolysis GCMS with quaternary ammonium reagents. These techniques allowed a detailed chemical characterisation of microgram-sized samples, based on the detection and identification of derivatives of the hydroxy aliphatic and cyclic (sesquiterpene) acids that compose the resin. Differences in composition could be related to the nature of the resin, e.g. wax-containing (unrefined), bleached, or aged samples. Furthermore, differences in the relative abundances of aliphatic hydroxyacids appear to be associated with the biological source of the resin. The diagnostic value of newly characterised lac components, including 8-hydroxyacids, is discussed here for the first time. Identification of derivatised components was aided by AMDIS deconvolution software, and discrimination of samples was enhanced by statistical evaluation of data using principal component analysis. The robustness of the analyses, together with the minimal sample size required, make these very powerful approaches for the characterisation of lac resin in museum objects. The value of such analyses for enhancing the understanding of museum collections is illustrated by two case studies of objects in the collection of the Philadelphia Museum of Art: a restorer's varnish on a painting by Luca Signorelli, and a pictorial inlay in an early nineteenth-century High Chest by George Dyer.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.chroma.2014.02.063 | DOI Listing |
J Dent
February 2025
Clinical Research, Dental-Material Gesellschaft mbH, Elbgaustraße 248, 22547, Hamburg, Germany; Department of Conservative Dentistry and Periodontology, LMU Klinikum, Goethestraße 70, 80336, Munich, Germany. Electronic address:
Objective: Success of resin infiltration for the masking of MIH-lesions remains difficult to predict, prompting suggestions to adjust the treatment protocol. This exploratory in vivo study aims to evaluate whether monitoring the resin infiltration process using transmitted light, compared to ambient light, enables a better estimation of when the infiltration process is completed, and to assess how the treatment success, i.e.
View Article and Find Full Text PDFRadiat Environ Biophys
December 2024
Faculty of Radiological Technology, Rangsit University, Pathumthani, 12000, Thailand.
This study explores the development and efficacy of eggshell-derived particle composites with epoxy resin for enhanced radiation shielding applications. Eggshells, primarily composed of calcium carbonate, were processed into particles of three sizes: small, medium, and large. These particles were incorporated into epoxy resin at a 50% weight ratio and characterized using a Laser Particle Size Distribution Analyzer.
View Article and Find Full Text PDFSci Rep
November 2024
Department of Physics, Faculty of Science, Isra University, Amman, Jordan.
The aim of the present study is to assess the shielding performance of a novel lead-free epoxide material against ionizing radiation. The effect of variation in particle size and concentration of tin oxide (SnO), which was added to epoxy resin polymer (ER), on its radiation shielding properties has been investigated in this research. Ten samples of ER samples incorporated with different concentrations (0%,20%,40%,60%) of SnO microparticles, nanoparticles, and both sizes combined were prepared and assessed.
View Article and Find Full Text PDFPolymers (Basel)
July 2024
Environmental Studies Department, Institute of Graduate Studies and Research, Alexandria University, Alexandria 21511, Egypt.
In this work, we studied the effect of bismuth oxide particle size and its attenuation capacity as a filler additive in epoxy resins. Six samples were prepared according to the amount of microparticles and nanoparticles in the sample and were coded as ERB-1, ERB-2, ERB-3, ERB-4, ERB-5, and ERB-6. One of the composite epoxies contained BiO microparticles at a 50:50 ratio (ERB-6) and was chosen as the control composite, and the number of microparticles (MPs) was gradually decreased and replaced by nanoparticles (NPs) to produce epoxy-containing BiO nanoparticles at a 50:50 ratio (ERB-1).
View Article and Find Full Text PDFACS Appl Mater Interfaces
September 2023
Yunnan Province Key Laboratory of Wood Adhesives and Glued Products, Key Laboratory of Forest Resources Conservation and Utilization in the Southwest Mountains of China, Ministry of Education, International Joint-Research Center for Bio-Materials, Ministry of Science and Technology, College of Materials and Chemical Engineering, Southwest Forestry University, Kunming 650224, China.
Developing safe and effective wound dressings that address the complexities of wound healing is an ongoing goal in biomaterials research. Inspired by the shield used to protect lac insects, we have designed and developed a type of bioactive shellac-based wound dressing in this paper. The dressing exhibited a high adhesion energy of 146.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!