Bone loss due to thermo necrosis may weaken the purchase of surgically placed screws and pins, causing them to loosen postoperatively. The heat generated during the bone drilling is proportional to cutting speed and force and may be partially dissipated by the blood and tissue fluids, and somehow carried away by the chips formed. Increasing cutting speed will reduce cutting force and machining time. Therefore, it is of interest to study the effects of the increasing cutting speed on bone drilling characteristics. In this article, the effects of the increasing cutting speed ranging from 500 up to 18,000 r/min on the thrust force and the temperature rise are studied for bovine femur bone. The results of this study reveal that the high-speed drilling of 6000-7000 r/min may effectively reduce the two parameters of maximum cortical temperature and duration of exposure at temperatures above the allowable levels, which in turn reduce the probability of thermal necrosis in the drill site. This is due to the reduction of the cutting force and the increase in the chip disposal speed. However, more increases in the drill bit rotational speed result in an increase in the amount of temperature elevation, not because of sensible change in drilling force but a considerable increase in friction among the chips, drill bit and the hole walls.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1177/0954411914524933 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Simple and safe redo sternotomy technique using the ultrasonic bone scalpel for patients with an embedded calcified conduit.
Multimed Man Cardiothorac Surg
January 2025
Hibino Laboratory, University of Chicago Medicine, Chicago, IL, USA.
With the increase of patients with adult congenital heart disease, the number of high-risk multiple redo sternotomies is increasing. Calcified conduit embedded in the sternum or large vessels attached to the sternum presents an especially challenging case. This video tutorial presents a simple safe redo sternotomy technique using an ultrasonic bone scalpel in such high-risk patients.
View Article and Find Full Text PDFSchNet_IIA: Potential Energy Surface Fitting by Interatomic Interactions Attention Based on Transfer Learning Analysis.
J Chem Inf Model
January 2025
College of Information Science and Engineering, Huaqiao University, Xiamen 361021, China.
Machine learning methods for fitting potential energy surfaces and molecular dynamics simulations are becoming increasingly popular due to their potentially high accuracy and savings in computational resources. However, existing application models often rely on basic architectures like artificial neural networks (ANNs) and multilayer perceptron (MLP), lagging behind cutting-edge technologies in the machine learning domain. Furthermore, the complexity of current machine learning frameworks leads to reduced interpretability and challenges for improvement.
View Article and Find Full Text PDFComparison of mechanical properties and shaping performance of ProGlider and ProTaper ultimate slider.
BMC Oral Health
January 2025
Department of Conservative Dentistry, College of Dentistry, Kyung Hee University, 26-6, Kyungheedae-ro, Dongdaemun-gu, Seoul, 02453, Republic of Korea.
Background: This study aims to compare design, phase transformation behavior, and torsional resistance of the ProGlider (PG) and ProTaper ultimate slider (PUS) and to compare the performance of two files in the glide-path preparation of a double-curved artificial canal.
Methods: Scanning electron microscopy, micro-computed tomography, and differential scanning calorimetry were used to characterize the samples. A torsional resistance test was performed to obtain ultimate strength and distortion angle.
Advancing Alzheimer's Disease Modelling by Developing a Refined Biomimetic Brain Microenvironment for Facilitating High-Throughput Screening of Pharmacological Treatment Strategies.
Int J Mol Sci
December 2024
Department of Biochemistry, Faculty of Medicine, Level 17 Preclinical Building, Universiti Kebangsaan Malaysia, Jalan Yaacob Latif, Bandar Tun Razak, Cheras, Kuala Lumpur 56000, Malaysia.
Alzheimer's disease (AD) poses a significant worldwide health challenge, requiring novel approaches for improved models and treatment development. This comprehensive review emphasises the systematic development and improvement of a biomimetic brain environment to address the shortcomings of existing AD models and enhance the efficiency of screening potential drug treatments. We identify drawbacks in traditional models and emphasise the necessity for more physiologically accurate systems through an in-depth analysis of current literature.
View Article and Find Full Text PDFInfluence of Machining Parameters on the Surface Roughness and Tool Wear During Slot Milling of a Polyurethane Block.
Materials (Basel)
January 2025
Institute of Machine Tools and Production Engineering, Faculty of Mechanical Engineering, Lodz University of Technology, Stefanowskiego 1/15, 90-537 Lodz, Poland.
The aim of the work was to investigate the influence of the machining parameters on the surface roughness and tool wear during slot milling of a polyurethane block (PUB). In the experiment, the influence of the cutting speed, the feed per tooth and the depth of cut on the roughness and of the milling slot surface and wear of the end mill was analyzed. A three-axis CNC milling machine Emco Concept Mill 55 was used to perform the study.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!