Growth of alloy MoS(2x)Se2(1-x) nanosheets with fully tunable chemical compositions and optical properties.

J Am Chem Soc

Key Laboratory for Micro-Nano Physics and Technology of Hunan Province, State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha, Hunan 410082, P. R. China.

Published: March 2014

Band gap engineering of atomically thin two-dimensional layered materials is critical for their applications in nanoelectronics, optoelectronics, and photonics. Here we report, for the first time, a simple one-step chemical vapor deposition approach for the simultaneous growth of alloy MoS2xSe2(1-x) triangular nanosheets with complete composition tunability. Both the Raman and the photoluminescence studies show tunable optical properties consistent with composition of the alloy nanosheets. Importantly, all samples show a single bandedge emission peak, with the spectral peak position shifting from 668 nm (for pure MoS2) to 795 nm (for pure MoSe2), indicating the high quality for these complete composition alloy nanosheets. These band gap engineered 2D structures could open up an exciting opportunity for probing their fundamental physical properties in 2D and may find diverse applications in functional electronic/optoelectronic devices.

Download full-text PDF

Source
http://dx.doi.org/10.1021/ja500069bDOI Listing

Publication Analysis

Top Keywords

growth alloy
8
alloy mos2xse21-x
8
optical properties
8
band gap
8
complete composition
8
composition alloy
8
alloy nanosheets
8
nanosheets
4
mos2xse21-x nanosheets
4
nanosheets fully
4

Similar Publications

Evaluation of the Wear of Ni 200 Alloy After Long-Term Carbon Capture in Molten Salts Process.

Materials (Basel)

December 2024

Department of Geomechanics, Civil Engineering and Geotechnics, Faculty of Civil Engineering and Resource Management, AGH University of Krakow, al. Adama Mickiewicza 30, 30-059 Cracow, Poland.

Reducing CO emissions is one of the major challenges facing the modern world. The overall goal is to limit global warming and prevent catastrophic climate change. One of the many methods for reducing carbon dioxide emissions involves capturing, utilizing, and storing it at the source.

View Article and Find Full Text PDF

Propagation of a Fatigue Crack Through a Hole.

Materials (Basel)

December 2024

University Coimbra, Centre for Mechanical Engineering, Materials and Processes (CEMMPRE), Department of Mechanical Engineering, 3030-788 Coimbra, Portugal.

The stop-hole technique is a well-known strategy to extend the fatigue life of cracked components. The ability to estimate fatigue life after the hole is important for safety reasons. The objective here is to develop strategies for the accurate prediction of initiation and propagation life ahead of the stop-hole.

View Article and Find Full Text PDF

Study on Fatigue Behavior and Fracture Mechanism of LMD Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy Based on Microstructure.

Materials (Basel)

December 2024

State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, No. 127, Youyi Road (West), Xi'an 710072, China.

This study explores the fatigue behavior and fracture mechanisms of TC11 titanium alloy formed by laser metal deposition (LMD) and subjected to double annealing. The research focuses on how the alloy's unique microstructure, consisting of alternating equiaxed and columnar crystals, influences its fatigue performance. The microstructure's basket-like α' phase, made up of both plate-shaped and needle-like structures, leads to variations in crack growth behavior, as shown in the relationship between the crack growth rate and the stress intensity.

View Article and Find Full Text PDF

Anomalies in Long-Crack Propagation at Low ΔK in Some Engineering Alloys.

Materials (Basel)

December 2024

TDA Inc., Falls Church, VA 22043, USA.

In this article, we discuss an unusual pattern in long-crack behavior at low stress intensity factor ranges ΔK (below ΔK), characterized by an initial dip, followed by a plateau, and then an acceleration in fatigue crack growth (FCG) rate. This unanticipated FCG behavior was first observed experimentally in the IMI 834 alloy and reported by Marci in 1996. Such an anomaly is only reported from experimental observation but cannot be understood or explained using the plasticity, roughness, or oxide-induced crack closure assumptions.

View Article and Find Full Text PDF

Good oral hygiene is crucial during treatment with fixed appliances, emphasising the need for additional or alternative oral health methods during orthodontic treatment. This study investigates the effect of essential oil (EO)-based preparations on biofilm adhesion to orthodontic archwires. Five identical-sized orthodontic archwires of different materials were tested using therapeutic and preventive applications of essential oils.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!