A vibration-based MEMS piezoelectric energy harvester and power conditioning circuit.

Sensors (Basel)

College of Optoelectronic Engineering, Chongqing University, Chongqing 400044, China.

Published: February 2014

This paper presents a micro-electro-mechanical system (MEMS) piezoelectric power generator array for vibration energy harvesting. A complete design flow of the vibration-based energy harvester using the finite element method (FEM) is proposed. The modal analysis is selected to calculate the resonant frequency of the harvester, and harmonic analysis is performed to investigate the influence of the geometric parameters on the output voltage. Based on simulation results, a MEMS Pb(Zr,Ti)O3 (PZT) cantilever array with an integrated large Si proof mass is designed and fabricated to improve output voltage and power. Test results show that the fabricated generator, with five cantilever beams (with unit dimensions of about 3 × 2.4 × 0.05 mm3) and an individual integrated Si mass dimension of about 8 × 12.4 × 0.5 mm3, produces a output power of 66.75 μW, or a power density of 5.19 μW∙mm-3∙g-2 with an optimal resistive load of 220 kΩ from 5 m/s2 vibration acceleration at its resonant frequency of 234.5 Hz. In view of high internal impedance characteristic of the PZT generator, an efficient autonomous power conditioning circuit, with the function of impedance matching, energy storage and voltage regulation, is then presented, finding that the efficiency of the energy storage is greatly improved and up to 64.95%. The proposed self-supplied energy generator with power conditioning circuit could provide a very promising complete power supply solution for wireless sensor node loads.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3958224PMC
http://dx.doi.org/10.3390/s140203323DOI Listing

Publication Analysis

Top Keywords

power conditioning
12
conditioning circuit
12
mems piezoelectric
8
energy harvester
8
power
8
resonant frequency
8
output voltage
8
energy storage
8
energy
6
vibration-based mems
4

Similar Publications

This study presents an in-depth analysis and evaluation of the performance of a standard 200 W solar cell, focusing on the energy and exergy aspects. A significant research gap exists in the comprehensive integration of numerical models with advanced machine-learning approaches, specifically emotional artificial neural networks (EANN), to simulate and optimize the electrical characteristics and efficiency of solar panels. To address this gap, a numerical model alongside a novel EANN was employed to simulate the system's electrical characteristics, including open-circuit voltage, short-circuit current, system resistances, maximum power point characteristics, and characteristic curves.

View Article and Find Full Text PDF

The aim of this study was to compare the acute effect of three cluster set (CS) intra-set rest intervals (15 s, 30 s, and 45 s) on mechanical performance measures during a flywheel resistance training session. Twelve amateur male field sport athletes attended three training measurement sessions (separated by 14 days of wash-out), consisting of four sets of nine repetitions (as cluster-blocks: 3 + 3 + 3), using a 0.050 kg·m inertial load.

View Article and Find Full Text PDF

The Effects of Reverse Nordic Exercise Training on Measures of Physical Fitness in Youth Karate Athletes.

J Funct Morphol Kinesiol

December 2024

Institut Supérieur de Sport et de l'Éducation Physique du Kef, Université de Jendouba, Le Kef 7100, Tunisia.

In karate, the ability to execute high-velocity movements, particularly kicks and punches, is heavily dependent on the strength and power of the lower limb muscles, especially the knee extensors. As such, this study aimed to evaluate the effects of an 8-week eccentric training program utilizing the reverse Nordic exercise (RNE) integrated into karate training compared with regular karate training only on measures of physical fitness in youth karate athletes. Twenty-seven youth karatekas were recruited and allocated to either RNE group (n = 13; age = 15.

View Article and Find Full Text PDF

Global network control from local information.

Chaos

December 2024

Department of Physics and Astronomy, Northwestern University, Evanston, Illinois 60208, USA.

In the classical control of network systems, the control actions on a node are determined as a function of the states of all nodes in the network. Motivated by applications where the global state cannot be reconstructed in real time due to limitations in the collection, communication, and processing of data, here we introduce a control approach in which the control actions can be computed as a function of the states of the nodes within a limited state information neighborhood. The trade-off between the control performance and the size of this neighborhood is primarily determined by the condition number of the controllability Gramian.

View Article and Find Full Text PDF

Among the numerous residential appliances, window or split air conditioners are the most prevalent. The hydrochlorofluorocarbon and hydrofluorocarbon refrigerants used in those systems are causing a serious threat to the environment. In this study, R290-hydrofluoroolefin (HFO) mixtures are proposed as replacements for high-GWP substances (R410A and R22) in window air conditioning (WAC) units.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!