Leachate contains amounts of non-biodegradable matters with COD range of 400-1500mg/L after the biological treatment, and should be removed further to attain the Chinese discharge standards. Hydration reaction has the potential to combine and solidify some recalcitrant substances, and thus could be applied as the advanced leachate treatment process. It was found that COD and NH3N decreased from 485 to<250mg/L and 91 to 10mg/L, with the removal rate over 50% and 90% in the first 6d, respectively, and COD and NH3N removal capacity were around 23.7 and 9.2mg/g under the test conditions. The percentage of the substances with low Mn range of<1000 decreased from 32.9% to 3.2% in leachate after hydration reaction. Tricalcium aluminate, tricalcium silicate and dicalcium silicate were the most activity compounds successively for the pollutant removal in leachate, and hydration reaction could be the option for the advanced wastewater treatment process thereafter.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.wasman.2014.01.009 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Development of Rice Cake Fortified With Acorn Flour and Inulin Using Superheated Steam Technology: Analysis of Physicochemical, Structural, and Baking Properties.
Food Sci Nutr
January 2025
Department of Food Science and Technology, Faculty of Agriculture Urmia University Urmia Iran.
Steam injection, especially in a superheated state, increases the rate of heat transfer and improves the quality of the baked products. In this research, different baking methods (forced convention, superheated steam, and superheated steam-assisted) at different temperatures (140°C, 160°C, 180°C) were applied to produce a new formulated rice cake containing acorn flour and inulin. The findings revealed that the level of moisture inside the oven directly influences the volume of the cake.
View Article and Find Full Text PDFSynthesis of Arsenocholine-Type Polycation Brush and Its Hydration Structure in Aqueous Solution.
Langmuir
January 2025
School of Advanced Engineering, Kogakuin University, Tokyo 192-0015, Japan.
Arsenocholine-containing methacrylate (MTAsB) inspired by marine organisms was synthesized by the reaction of 2-bromoethyl methacrylate and trimethylarsine to investigate its polymerization behavior and the fundamental properties of the resulting polymer. Controlled radical polymerization of MTAsB proceeded in the presence of a copper catalyst and imidazolium chloride at 60 °C for 8 h to give a water-soluble polycation with a 94% yield. The smaller amount of nonfreezing water and intermediate water of poly(MTAsB) was observed compared with that of the ammonium-containing polycations.
View Article and Find Full Text PDFEnzyme cascade nanozyme based colorimetric sensor for detection of uric acid as a biomarker of hyperuricemia.
Mikrochim Acta
January 2025
Key Laboratory of Organic Integrated Circuit, Ministry of Education & Tianjin Key Laboratory of Molecular Optoelectronic Sciences, Department of Chemistry, School of Science, Tianjin University, Tianjin, 300072, China.
A Cr-doped VO nanobelt (Cr/VO) with remarkable peroxidase-like activity was synthesized and coupled with uricase to catalyze the cascade reaction for detection of uric acid. Notably, the affinity of Cr/VO for 3,3',5,5'-tetramethylbenzidine dihydrochloride hydrate (TMB) and hydrogen peroxide (HO) is tenfold and 20-fold higher, respectively, than that of horseradish peroxidase (HRP). The Cr/VO exhibits highly reactive and stable peroxidase activity at temperatures of 20-60 ℃.
View Article and Find Full Text PDFHow Should We Use Hyaluronidase for Dissolving Hyaluronic Acid Fillers?
J Cosmet Dermatol
January 2025
Division in Anatomy and Developmental Biology, Department of Oral Biology, Human Identification Research Institute, BK21 FOUR Project, Yonsei University College of Dentistry, Seoul, Korea.
Background: Hyaluronic acid (HA) fillers are commonly used in esthetic medicine for facial contouring and rejuvenation. However, complications such as overcorrection, vascular occlusion, and irregular filler distribution necessitate the use of hyaluronidase to dissolve the fillers. This study aimed to evaluate the efficacy of hyaluronidase in degrading different types of HA fillers and provide clinical guidelines for its use based on filler type, dosage, and application techniques.
View Article and Find Full Text PDFDefect-Induced Electron Localization Promotes D2O Dissociation and Nitrile Adsorption for Deuterated Amines.
Angew Chem Int Ed Engl
January 2025
Tianjin University, Department of Chemistry, #92, Weijin Road, Nankai District, Department of Chemistry, School of Science, Tianjin University, 300072, Tianjin, CHINA.
Electrochemical reductive deuteration of nitriles is a promising strategy for synthesizing deuterated amines with D2O as the deuterated source. However, this reaction suffers from high overpotentials owing to the sluggish D2O dissociation kinetics and high thermodynamic stability of the C≡N triple bond. Here, low-coordinated copper (LC-Cu) is designed to decrease the overpotential for the electrosynthesis of the precursor of Melatonin-d4, 5-methoxytryptamine-d4, by 100 mV with a 68% yield (Faraday efficiency), which is 4 times greater than that of high-coordinated copper (HC-Cu).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!