An approach based on spheropolygons (i.e., the Minkowski sum of a polygon with N vertices and a disk with spheroradius r) is presented to describe the shape of kaolinite aggregates in water and to investigate interparticle collision dynamics. Spheropolygons generated against images of kaolinite aggregates achieved an error between 0.5% and 20% as compared to at least 32% of equivalent spheres. These spheropolygons were used to investigate the probability of collision (Pr[C]) and aggregation (Pr[A]) under the action of gravitational, viscous, contact (visco-elastic), electrostatic and van der Waals forces. In ortho-axial (i.e., frontal) collision, Pr[A] of equivalent spheres was always 1, however, stochastic analysis of collision among spheropolygons showed that Pr[A] decreased asymptotically with N increasing, and decreased further in peri-axial (i.e., tangential) collision. Trajectory analysis showed that not all collisions occurring within the attraction zone of the double layer resulted in aggregation, neither all those occurring outside it led to relative departure. Rather, the relative motion on surface asperities affected the intensity of contact and attractive forces to an extent to substantially control a collision outcome in either instances. Spheropolygons revealed therefore how external shape can influence particle aggregation, and suggested that this is equally important to contact and double layer forces in determining the probability of particle aggregation.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.watres.2014.01.026 | DOI Listing |
ACS Omega
December 2024
Key Laboratory for Enhanced Oil & Gas Recovery of the Ministry of Education, Northeast Petroleum University, Daqing 163318, Heilongjiang, China.
In alkali/surfactant/polymer (ASP) flooding systems, alkalis react with clay minerals such as Illite, montmorillonite, and kaolinite, leading to reservoir damage and impacting oil recovery rates. Therefore, studying the dissolution effects of strong alkalis on clay minerals is crucial for improving oil recovery. This study uses Illite as a representative clay mineral and employs the ReaxFF reactive force field and molecular dynamics simulations to model its dissolution in NaOH solution.
View Article and Find Full Text PDFSci Rep
November 2024
School of Architectural Engineering, Neijiang Normal University, Neijiang, 641112, China.
The Cretaceous mudstone undergoes significant argillization and disintegration when in contact with water due to its high content of clay minerals, posing a severe challenge to the stability of roadways in coal mines during construction and operation. This research aimed to prepare water-sensitive mudstone-like materials by the method of clay mineral composition similar to that of natural Cretaceous mudstone to reproduce the mechanical and hydraulic properties of natural rocks and meanwhile reveal the deteriorating effect of clay minerals on its microstructure and macroscopic properties. Using binary clay-gypsum mixtures and considering the aggregate-binder ratio, the clay-gypsum ratio, the iron sand content in fine sand, and the powder sand content in aggregate as controlling factors, 16 groups of proportioning schemes were established using the orthogonal test method and a series of physic mechanical experiments were conducted to determine its mechanical and hydraulic properties.
View Article and Find Full Text PDFJ Hazard Mater
January 2025
Ningbo Institute of Digital Twin, Eastern Institute of Technology, Ningbo 315200, China. Electronic address:
In the study, cotransport of fullerene nanoparticles (nC) and mobile clay colloids (illite (ILL), kaolinite (KL), montmorillonite (ML)) in aquifer porous media and its relation to the aggregative interaction between these two types of particles was investigated. Minimal interaction occurred between nC and ILL, resulting in unaffected transport. Strong heteroaggregation between ML and nC resulted in not only significant retention of both particles during their cotransport but also the retention of nC in the media pre-injected with ML.
View Article and Find Full Text PDFEnviron Pollut
December 2024
State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, 430071, China; IRSM-CAS/HK Poly U Joint Laboratory on Solid Waste Science, Wuhan, 430071, China; Hubei province Key Laboratory of Contaminated Sludge and Soil Science and Engineering, Wuhan, 430071, China.
ACS Appl Mater Interfaces
November 2024
National Engineering Research Center of Chemical Fertilizer Catalyst, College of Chemical Engineering, Fuzhou University, Fuzhou 350002, P. R. China.
Controllable synthesis of hierarchical zeolites from natural aluminosilicate minerals is considered an efficient and eco-friendly approach for the production of high-performance zeolites, but its synthesis mechanism is still obscure. Herein, we take the synthesis of a single-crystalline hierarchical NaA zeolite using submolten salt depolymerized kaolin (SMS-K) as the sole source of silicon and aluminum via a mesoscale reorganization strategy as an example to elucidate the reorganization process. Comprehensive morphological and structural analyses reveal that sodium-rich voids in SMS-K facilitate concurrent assembly both within the interior and at the interface of the amorphous gel, leading to the formation of numerous nanoparticles with short-range order which assemble into single-crystal nanocube NaA zeolites with intracrystalline mesopores.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!