In this work the determination of the pigments present in a decorative wallpaper of the middle nineteenth century from the Santa Isabel factory (Vitoria-Gasteiz, Basque Country, Spain) has been performed by a combination of mid-Diffuse Reflectance Infrared Spectroscopy (DRIFT) and Far Infrared Spectroscopy (FIR) in transmission mode. The DRIFT is a powerful infrared technique that is not widely used in the analyses of artworks in spite of being especially adequate for powdered samples. In this mode, sample pretreatment is not required and the obtained spectra are easier to solve than those obtained in transmittance mode. Those pigments which are not active in the mid-infrared region may be determined easily by FIR. In the last decade, in the field of painted materials very few studies performed by far infrared spectroscopy and mid infrared spectroscopy in diffuse reflectance mode can be found. In most of them the researchers have used one of these techniques, but in no case the combination of both. As we demonstrate in this work, combining these two techniques a complete characterization of the wallpaper can be carried out. Small samples were collected from the wallpaper for the analysis of the rose, brown, yellow and blue colours. In this way, minium (Pb3O4), calcite (CaCO3), barium sulphate (BaSO4), prussian blue (Fe7C18N18), iron oxide yellow (α-FeOOH), vermillion (HgS) and carbon black pigment from organic origen were detected. Finally, the validation was carried out by XRF and Raman spectroscopy getting the same results as with the combination of diffuse reflectance infrared spectroscopy and far infrared spectroscopy.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.saa.2014.01.017DOI Listing

Publication Analysis

Top Keywords

infrared spectroscopy
24
reflectance infrared
12
determination pigments
8
wallpaper middle
8
middle nineteenth
8
nineteenth century
8
combination mid-diffuse
8
mid-diffuse reflectance
8
infrared
8
diffuse reflectance
8

Similar Publications

3D printing, as a layer-by-layer manufacturing technique, enables the customization of tissue engineering scaffolds. Surface modification of biomaterials is a beneficial approach to enhance the interaction with living cells and tissues. In this research, a polylactic acid/polyethylene glycol scaffold containing 30 % bredigite nanoparticles (PLA/PEG/B) was fabricated utilizing fused deposition modeling (FDM) 3D printing.

View Article and Find Full Text PDF

Enhanced bacterial cellulose production by indigenous isolates: Insights from mutagenesis and evolutionary techniques.

Int J Biol Macromol

January 2025

Iranian Research Organization for Science and Technology (IROST), Sh. Ehsani Rad St., Enqelab St., Ahmadabad Mostoufi Rd., Azadegan Highway, P. O. Box 33535-111, Tehran 3313193685, Iran.

Bacterial cellulose, with mechanical strength, high water absorption, and crystallinity, is used in eco-friendly packaging, wound dressings, and drug delivery systems. Despite its potential, industrial-scale production is limited by inefficiency and high costs, requiring high-yield strains and optimized growth conditions. This study found that indigenous isolates produce superior bacterial cellulose compared to standard strains.

View Article and Find Full Text PDF

Machine learning outperforms humans in microplastic characterization and reveals human labelling errors in FTIR data.

J Hazard Mater

December 2024

Discipline of Chemistry, The University of Newcastle, University Drive, Newcastle, New South Whales 2308, Australia; School of Chemistry, Monash University, Wellington Road, Melbourne, Victoria 3800, Australia. Electronic address:

Microplastics are ubiquitous and appear to be harmful, however, the full extent to which these inflict harm has not been fully elucidated. Analysing environmental sample data is challenging, as the complexity in real data makes both automated and manual analysis either unreliable or time-consuming. To address challenges, we explored a dense feed-forward neural network (DNN) for classifying Fourier transform infrared (FTIR) spectroscopic data.

View Article and Find Full Text PDF

Exploring redox-active electrolytes to boost energy density of carbon-based supercapacitors.

J Colloid Interface Sci

January 2025

School of Chemistry and Chemical Engineering, Zhejiang Sci-Tech University, 928 Second Street, Hangzhou 310018 China; Zhejiang Sci-Tech University Shengzhou Innovation Research Institute, Shengzhou 312400, China. Electronic address:

To boost supercapacitor (SC) energy density, we introduced redox-active molecules into an aqueous HSO electrolyte. Using retrosynthetic analysis, we identified aminoquinones, specifically triaminochlorobenzoquinone (TACBQ), as promising candidates. Characterization via elemental analysis, Fourier Transform Infrared Spectrometer (FT-IR), nuclear magnetic resonance (NMR), and X-ray photoelectron spectroscopy (XPS) confirmed structure of TACBQ.

View Article and Find Full Text PDF

Plastic waste management is one of the key issues in global environmental protection. Integrating spectroscopy acquisition devices with deep learning algorithms has emerged as an effective method for rapid plastic classification. However, the challenges in collecting plastic samples and spectroscopy data have resulted in a limited number of data samples and an incomplete comparison of relevant classification algorithms.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!