The acid-catalyzed reaction of 5-(hydroxymethyl)-2-furfural with ethanol is a promising route to produce biofuels or fuel additives within the carbohydrate platform; specifically, this reaction may give 5-ethoxymethylfurfural, 5-(ethoxymethyl)furfural diethylacetal, and/or ethyl levulinate (bioEs). It is shown that sulfonated, partially reduced graphene oxide (S-RGO) exhibits a more superior catalytic performance for the production of bioEs than several other acid catalysts, which include sulfonated carbons and the commercial acid resin Amberlyst-15, which has a much higher sulfonic acid content and stronger acidity. This was attributed to the cooperative effects of the sulfonic acid groups and other types of acid sites (e.g., carboxylic acids), and to the enhanced accessibility to the active sites as a result of the 2D structure. Moreover, the acidic functionalities bonded to the S-RGO surface were more stable under the catalytic reaction conditions than those of the other solids tested, which allowed its efficient reuse.

Download full-text PDF

Source
http://dx.doi.org/10.1002/cssc.201301149DOI Listing

Publication Analysis

Top Keywords

graphene oxide
8
sulfonic acid
8
acid
5
sulfonated graphene
4
oxide effective
4
effective catalyst
4
catalyst conversion
4
conversion 5-hydroxymethyl-2-furfural
4
5-hydroxymethyl-2-furfural biofuels
4
biofuels acid-catalyzed
4

Similar Publications

To develop and evaluate graphene oxide/gelatin/alginate scaffolds for advanced wound therapy capable of mimicking the native extracellular matrix (ECM) and bio-stimulating all specific phases of the wound healing process, from inflammation and proliferation to the remodeling of damaged skin tissue in three dimensions. The scaffolds were engineered as interpenetrating polymeric networks by the crosslinking reaction of gelatin in the presence of alginate and characterized by structural, morphological, mechanical, swelling properties, porosity, adhesion to the skin tissue, wettability, and in vitro simultaneous release of the active agents. Biocompatibility of the scaffolds were evaluated in vitro by MTT test on fibroblasts (MRC5 cells) and in vivo using assay.

View Article and Find Full Text PDF

Laser reduction of graphene oxide (GO) is a promising approach for achieving flexible, robust, and electrically conductive graphene/polymer composites. Resulting composite materials show significant technological potential for energy storage, sensing, and bioelectronics. However, in the case of insulating polymers, the properties of electrodes show severely limited performance.

View Article and Find Full Text PDF

Flexible, wearable, piezoresistive sensors have significant potential for applications in wearable electronics and electronic skin fields due to their simple structure and durability. Highly sensitive, flexible, piezoresistive sensors with the ability to monitor laryngeal articulatory vibration supply a new, more comfortable and versatile way to aid communication for people with speech disorders. Here, we present a piezoresistive sensor with a novel microstructure that combines insulating and conductive properties.

View Article and Find Full Text PDF

Carbon-based nanomaterials with excellent electrical and optical properties are highly sought after for a plethora of hybrid applications, ranging from advanced sustainable energy storage devices to opto-electronic components. In this contribution, we examine in detail the dependence of electrical conductivity and the ultrafast optical nonlinearity of graphene oxide (GO) films on their degrees of reduction, as well as the link between the two properties. The GO films were first synthesized through the vacuum filtration method and then reduced partially and controllably by way of femtosecond laser direct writing with varying power doses.

View Article and Find Full Text PDF

Graphite oxidation to graphene oxide (GO) is carried out using methods developed by Brodie (GO-B) and Hummers (GO-H). However, a comparison of the antibacterial properties based on the physicochemical properties has not been performed. Therefore, this paper outlines a comparative analysis of GO-H and GO-B on antibacterial efficacy against Gram-positive and Gram-negative bacterial cultures and biofilms in an aqueous environment and discusses which of the properties of these GO nanomaterials have the most significant impact on the antibacterial activity of these materials.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!