Fully solution-processed flexible organic thin film transistor arrays with high mobility and exceptional uniformity.

Sci Rep

Research Center for Organic Electronics (ROEL), Graduate School of Science and Engineering, Yamagata University, 4-3-16, Jonan, Yonezawa, Yamagata, 992-8510, Japan.

Published: February 2014

Printing fully solution-processed organic electronic devices may potentially revolutionize production of flexible electronics for various applications. However, difficulties in forming thin, flat, uniform films through printing techniques have been responsible for poor device performance and low yields. Here, we report on fully solution-processed organic thin-film transistor (TFT) arrays with greatly improved performance and yields, achieved by layering solution-processable materials such as silver nanoparticle inks, organic semiconductors, and insulating polymers on thin plastic films. A treatment layer improves carrier injection between the source/drain electrodes and the semiconducting layer and dramatically reduces contact resistance. Furthermore, an organic semiconductor with large-crystal grains results in TFT devices with shorter channel lengths and higher field-effect mobilities. We obtained mobilities of over 1.2 cm(2) V(-1) s(-1) in TFT devices with channel lengths shorter than 20 μm. By combining these fabrication techniques, we built highly uniform organic TFT arrays with average mobility levels as high as 0.80 cm(2) V(-1) s(-1) and ideal threshold voltages of 0 V. These results represent major progress in the fabrication of fully solution-processed organic TFT device arrays.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3912504PMC
http://dx.doi.org/10.1038/srep03947DOI Listing

Publication Analysis

Top Keywords

fully solution-processed
16
solution-processed organic
12
tft arrays
8
tft devices
8
channel lengths
8
v-1 s-1
8
organic tft
8
organic
7
tft
5
fully
4

Similar Publications

Spin coating stands out as the most employed thin-film deposition technique across a variety of scientific fields. Particularly in the past two decades, spin coaters have become increasingly popular due to the emergence of solution-processed semiconductors such as quantum dots and perovskites. However, acquiring commercial spin coaters from reputable suppliers remains a significant financial burden for many laboratories, particularly for smaller research or educational facilities.

View Article and Find Full Text PDF

This work unveils critical insights through spectroscopic analysis highlighting electrical phenomena and oxygen vacancy generation in self-aligned fully solution-processed oxide thin-film transistors (TFTs). Ar inductively coupled plasma treatment was conducted to fabricate an amorphous indium zinc oxide (a-InZnO) TFT in a self-aligned process. Results showed that the Ar plasma-activated a-InZnO regions became conductive, which means that a homogeneous layer can act as both channel and electrode in the device.

View Article and Find Full Text PDF

Silver nanowires (AgNWs) have gained much attention owing to their optoelectronic and mechanical properties and are therefore potential candidates to tackle intrinsic drawbacks of currently applied transparent electrodes in various (opto)electronic devices. In order for AgNWs to be justifiably considered as viable, it is necessary to address their insufficient stability by coupling them with another constituent into a nanocomposite. For this purpose, ZnO was chosen because of its low cost, solution processability and barrier properties.

View Article and Find Full Text PDF
Article Synopsis
  • Printed electronics is a game-changing technology used in various applications such as sensors, displays, and wearable devices, utilizing 2D materials for their excellent properties.
  • Traditional methods for producing 2D electronic inks, like centrifugation, are time-consuming and inefficient, while newer methods face challenges due to low concentration requirements.
  • The presented study introduces a continuous flow system using advanced ceramic membranes that enhance processing efficiency, significantly reduce environmental impact, and lower production costs for high-quality printable inks.
View Article and Find Full Text PDF

Endo-Encapsulated Multi-Resonance Dendrimers with Through-Space Interactions for Efficient Narrowband Blue-Emitting Solution-Processed OLEDs.

Angew Chem Int Ed Engl

October 2024

State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, 130022, Changchun, P. R. China.

Different from conventional luminescent dendrimers with fluorophore tethered outside to dendron, here we first developed endo-encapsulated luminescent dendrimers with multi-resonance (MR) fluorophore embedded inside of carbazole dendrons by growing dendrons through 1,8-positions of central carbazole moiety to create a cavity for accommodating the fluorophore. This endo-encapsulated structure not only shields the fluorophore to fully resist aggregation-caused spectral broadening, but also induce through-space interactions between dendron and fluorophore via intramolecular π-stacking, giving lowered singlet state energy and reduced singlet-triplet energy splitting to accelerate reverse intersystem crossing (RISC) from triplet to singlet states. The resultant dendrimer containing 1,8-linked second-generation carbazole dendrons and boron, sulfur-doped polycyclic MR fluorophore exhibits narrowband blue emission at 471 nm with FWHM kept at 34 nm even in neat film, together with ~4 times enhancement of RISC rate constant compared to its exo-tethered counterpart.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!